I’m an independent shop owner that does the occasional car flip... I like the attention to detail that you do! In Central Texas we don’t have to deal with rust issues, so I appreciate the content that provides the extra steps required up there! Keep up the good work!
Scott you make a cab swap look easy! Like always you are fast & quality conscious which is in short supply in automotive rebuilding! I am sure whoever gets this truck that they will be very happy with it!
I watched the GMC Sierra HD build that Goonzquad did. I wasn't learning anything after watching that whole series. I learn cool stuff in every single vehcor video!
I have anxiety attacks just thinking about changing the plugs on new vehicles I've changed Transmissions, re built SBC engines, replaced suspension parts, Pit Crewed on a AA/A dragster with Blown 392's back in the 1970's Watching You swap cabs was very eye opening and educational Lol, I don't have a Pizza delivery Girl to help Me or My 8 year old Grandson near by I have a 1983 F-250 Diesel Pickup with a fresh engine but it has a really rotted out Bed ( no intentions of using a bed on it ) & cab that I was playing with the idea of putting a newer year cab on the frame So far that project is not the priority, but I still look for a donor truck for really cheap Thanks for Your videos because now I have a better understanding of what gets done in what order Ken in Florida
I painted that bar behind the grille on my Avalanche 2003 too.Every time i saw it from the front,i said to myself to get it done..took 4 years lol,but i have done so much other stuff to it.I have seen all your vids the last year..i dig them :)
I work on those trucks for a living. Can do it all with my eyes close. I’ve done all of this many times, and no matter how many times you’ve done it it’s still a project. Haha. Love watching these videos.
It's great to watch someone that knows what they are doing. Because I watch you RUclips suggest others most I don't watch. This one I watched because it was a FORD F-350 . After watching a while these guys ( kids ) didn't seem to know what they were doing. Looking back at some older videos they've worked on them over priced sports cars. Instead of pulling a little bit on the wrecked spots. They just unbolted what they could reach and just wiggled the part back and forth till it broke off. Then they jumped into the interior and started on the airbags. The way the guy started wielding a razor blade I was sure he would have made an ER run for stitches. One thing that surprised me was after taking off the moldings / trim the headliner was still held up by a hand full of very strong neodymium magnets. You ever take a seat apart that has lumbar support and the other things? Well that is another reason I will never buy a new vehicle with that. I can't work on it and I won't pay to have it worked on if it was needed. Unless it stopped the truck from running hahaha.
Thanks for the support. I really only watch videos of someone sends me a link but I do know who you are talking about. 😂 I get lots of questions of what they are doing.
You get some great comments on your ( re ) builds . Your content is entertaining . When you say this only has this many bolts , I say WTF ; this isn't gonna work . Thx for the vid. Gonna keep watching .
@@vehcor And it's not boring Friday. For someone like me that don't have the ability place or the money to do stuff like this I look forward to fridays to at least be able to watch.
Good afternoon Scott, that afternoon crew does have ambition and get go. It's great that you have somebody that enjoys your passion too. How many miles on that truck. Make someone a really nice driver. Take care and have a good weekend.
She is always working hard at everything she does! It amazes me how fast she learns this stuff. The truck has 130k on it. Thanks for the support. Have a great weekend.
I was yelling like an idiot at my screen for the night crew to hurry the hell up with that door. My grandson was laughing his head off and let me know that, They Can’t Hear You Papa! 😂LOL Thanks for sharing! Great video’s!
😂 you could hear the defeat in her voice as soon as I tightened the first bolt, she knew it was over. I'll take my win, she probably won't let me win again!
I'm glad it's "boring build Friday" (Saturday here in Australia when we get your video). I always look forward to your new video each week. Just as well that you do bodybuilding, - those doors look really heavy. Looking forward to seeing the truck back on the road again. Hope you do a 10 minute video on the whole rebuild process, as it's always interesting to see a quick review of the entire build from start to finish.
Greetings from the other side of the world! I do work out but have always been able to handle the doors myself. I prefer not knowing exactly what they weigh, it might make them seem heavier. 😂 Thanks for the support!
Wow that's a pretty slick operation there I like Kevin that lifts that's the only way to do what you just did looks good you still got enough Parts you could probably fix a couple more trucks
@@vehcor Correct- I spent hours once trying to remove a Chevy Volt rear bumper without damage... sure was interesting- then to replace 5 seconds. I really feel for you, but you have that Knack and ability so few do.😎
I would love to see you do a Jeep Wrangler, they are almost guaranteed money. Please do!! It would help me in my build. Thanks and I LOVE your videos!!!! I def like and I’m subscribed!!! Keep up the good work brother
Wranglers are hard to find at a good price and the parts aren't cheap so the odds of me getting one that was worth it for me are slim. Thanks for the support!
*Afternoon crew is trying to make you have to re-paint a fender lol gonna have to dock her pay a little. Marker lights/fishbowls? lol new sponge gaskets would solve that if you wanted to buff out the old ones. love the race at the end. Close but no cigar! no really, NO CIGAR they are unhealthy and toxic any way* :o)
Looks good. I wish I could get my "afternoon crew" to help me out a little more but thats OK.....lol. Im not a huge GM guy but unbolting a bed is SO much easier on those than dealing with the always seized giant Torx head bolts in a Ford truck. Going together nicely with your hand and muscle memory from so many rebuilds!
Hey I gotta give ford props on the front bumper on the super duty's just a few bolts and it comes right off and man that is so much nicer then chasing all the ones a gm or dodge has hidden in pain in the ass spots or where you have to remove other parts to get to.
I can pull GM cabs without removing carpet too! lol They really are easier to work on. I give Fords and Dodge a hard time but I don't dislike them. My afternoon crew is the best around! Thanks for the support!
Really enjoying this series of rebuilding! I rebuilt the front of an 05’ Silverado a couple of years ago, traded it for an 05’ Sierra. These trucks are so easy to work on, parts are not expensive and everything pretty much snaps together. I have to ask, what’s up with the piece of masking tape with the smiley face?🤔
@@vehcor us clean freaks say your welcome .....today the hose ...tommorow safety glasses the next day... the World! one of us one of us one of us one of us one of us
@@clevelandmaker386 I don't want to be THAT guy but (assuming he hasn't already) wait until he has to go into the ER to get a shard removed.......THEN maybe he'll wear them.
@@marcosmaisterra4477 So you're blaming the safety glasses on you getting debris in your eye? That's false conclusions. That's like saying it only rains when you wear a rain coat therefore wearing a rain coat causes it to rain. That's like stating that "since motorcycle riders get into accidents while wearing a helmet, wearing a helmet causes accidents".
Cool videos, i got a similar bed cover for my nissan frontier. Mine doesnt use the bed frame rails- it sits on top but nearly flush, its pretty lightweight but strong too.
If there is a will, there is a way. I would be doing the same thing if I didn't have the cheating tools. It might put a dent in my turnaround time though! 😂 Good job getting it done!
Apparently cross fitting does absolutely nothing to hone door installation skills. Who knew? I certainly do appreciate your affinity for GM trucks as I too hold them in high regard.
I like it alot, "Jim Carey accent" Keep the vids coming and after doing some research, I notice you're only 2 hrs away. Btw, my nephew brought a 04 Silverado with an engine rattle for 400 bucks. Turned out to be the honeycomb rattling around in the catalytic converter. Easy fix.
When lifting those cabs off, where were your lift points, on the pinch seam or on the floor supports? Getting ready to do this exact job, just don't wanna mess the cab up.
as always............great detail..........easy to follow and learn from. Thanks! This is why content on the net, makes ordinary TV look as dumb as dog shit.
I must say I am disappointed with you. When working on Chevys, it is never boring. Painful, frustrating even idiotic at times, but never boring. 😏 Keep up the great work and keep these videos coming.
Nice job. Next time I'm in Illinois I will have to stop by when I drive my 66 Mustang up there . If I can find your place. Mustang need a little body work. Looks like I can have it done in 2 hours. Plus a good cleaning. 😂😂😂
I’m an independent shop owner that does the occasional car flip... I like the attention to detail that you do! In Central Texas we don’t have to deal with rust issues, so I appreciate the content that provides the extra steps required up there! Keep up the good work!
Thanks, I hope to be a neighbor some day!
We always love to see the afternoon crew and she is helpful. ITS always great too have two persons working then by yourself. And she's family.
I enjoy having her help. It makes the work more fun with her comments and remarks.
Scott you make a cab swap look easy! Like always you are fast & quality conscious which is in short supply in automotive rebuilding! I am sure whoever gets this truck that they will be very happy with it!
It's easy with as much practice as I have had. Thanks for the support!
You make this job look so easy ,And I know it’s a lot of work thank you for sharing good job.
This has quickly became one of my favorite RUclips channels. Cleetus and you are my top two. He breaks shit and you fix shit. It's a good balance.
I don't watch TV or RUclips much but Cleetus is one of the few I will watch from time to time! Thanks for the support!
I like watching Goonzquad as well as a few other car build channels
I also have a RUclips channel named Hot Topic Vlogs
I watched the GMC Sierra HD build that Goonzquad did. I wasn't learning anything after watching that whole series. I learn cool stuff in every single vehcor video!
Great job Vehcor!
Thank you for your continued support!
I have anxiety attacks just thinking about changing the plugs on new vehicles
I've changed Transmissions, re built SBC engines, replaced suspension parts, Pit Crewed on a AA/A dragster with Blown 392's back in the 1970's
Watching You swap cabs was very eye opening and educational
Lol, I don't have a Pizza delivery Girl to help Me or My 8 year old Grandson near by
I have a 1983 F-250 Diesel Pickup with a fresh engine but it has a really rotted out Bed ( no intentions of using a bed on it ) & cab that I was playing with the idea of putting a newer year cab on the frame
So far that project is not the priority, but I still look for a donor truck for really cheap
Thanks for Your videos because now I have a better understanding of what gets done in what order
Ken in Florida
You guys are hard workers and makes it look so easy may God continue to bless you
I started helping my dad in his shop in 1975. I've been an auto mechanic ever since.
Those boring Monday video not so boring I like to see those videos because how much work you put in to those vehicle
Thanks for the support!
Oh that was cute it's nice to see the afternoon crew in there helping!
They are always amusing to work with! 😂
Man, you get more done by mistake than most do on purpose. Great great job!
Woow man no words you are the best you make it see easy professional job
Thanks!
I painted that bar behind the grille on my Avalanche 2003 too.Every time i saw it from the front,i said to myself to get it done..took 4 years lol,but i have done so much other stuff to it.I have seen all your vids the last year..i dig them :)
They all fade and peel and once you have the grille off it only takes a few minutes to make them look 💯 better! Thanks for the support!
Doing something you enjoy, (and making money at it), spending time with the daughter, best times of your life.
Very much agreed!
I work on those trucks for a living. Can do it all with my eyes close. I’ve done all of this many times, and no matter how many times you’ve done it it’s still a project. Haha. Love watching these videos.
I have done quite a few of these. Maybe I try one blindfolded like the Grand Am! lol 🙈
Honestly I’ve been waiting for you to do that with one of these as well haha
so is the04 with 06 cab an 04 or an 06?
Love your videos, make it look so easy !
Thanks, years of practice!
Look forward every week to your boring videos!! Keep up the great work
Thanks for the support!
yes!!!!!! Boring build Friday already here !!!!!!!!!!
Yes here and gone. I'm a little late on the replies!
👍👍👍👍 listening too my Silverado rusting every night .....keeps me awake😂☃️☃️☃️🤣🍦
Not this one, plenty of wax so it will be quiet! 😂
It's great to watch someone that knows what they are doing. Because I watch you RUclips suggest others most I don't watch. This one I watched because it was a FORD F-350 . After watching a while these guys ( kids ) didn't seem to know what they were doing. Looking back at some older videos they've worked on them over priced sports cars. Instead of pulling a little bit on the wrecked spots. They just unbolted what they could reach and just wiggled the part back and forth till it broke off. Then they jumped into the interior and started on the airbags. The way the guy started wielding a razor blade I was sure he would have made an ER run for stitches. One thing that surprised me was after taking off the moldings / trim the headliner was still held up by a hand full of very strong neodymium magnets. You ever take a seat apart that has lumbar support and the other things? Well that is another reason I will never buy a new vehicle with that. I can't work on it and I won't pay to have it worked on if it was needed. Unless it stopped the truck from running hahaha.
Thanks for the support. I really only watch videos of someone sends me a link but I do know who you are talking about. 😂 I get lots of questions of what they are doing.
@@vehcor Just another question. How hard would it be to make the third break light to include turn signals? Either after market or from the factory.
Loved the Illinois corruption statement!
You get some great comments on your ( re ) builds . Your content is entertaining . When you say this only has this many bolts , I say WTF ; this isn't gonna work . Thx for the vid. Gonna keep watching .
Make the most of these times with the daughter. She will cherish them as much as you in 20 years. This is what good parenting looks like.
Thanks, she actually already enjoys it. Probably not as much as I do though.
“Lift down.....” Hilarious. Great video. 👍🏼 💪🏼
I'm still working on the technique! 😂
Those Bakflip covers are actually pretty nice 👍
clean freaks!
Just the way it should be done! Keep up the good work.
Watching you help me understand my 2000 silverado
Good to hear!
And another great video and of course the afternoon crew......
Thanks from all of us!
Very nice 👍 love your work I watch every Friday
Thanks for the support!
A clean boring build is a happy boring build !
This is true! 😂
Great video, you two make it look SO easy. Your experience
Shows . Much thanks.
Thanks for the support!
Great video enjoyed watching good job beating the girls keep up the great work
Thanks for the support!
Dude you make this look so easy.
Thanks, years of practice!
@@vehcor And it's not boring Friday. For someone like me that don't have the ability place or the money to do stuff like this I look forward to fridays to at least be able to watch.
Good afternoon Scott, that afternoon crew does have ambition and get go. It's great that you have somebody that enjoys your passion too. How many miles on that truck. Make someone a really nice driver. Take care and have a good weekend.
She is always working hard at everything she does! It amazes me how fast she learns this stuff. The truck has 130k on it. Thanks for the support. Have a great weekend.
Fantastic vid as usual... Murica!!! 🇺🇸
Thanks for the support! 🇺🇸
Good job mate
I was yelling like an idiot at my screen for the night crew to hurry the hell up with that door. My grandson was laughing his head off and let me know that, They Can’t Hear You Papa! 😂LOL Thanks for sharing! Great video’s!
😂 you could hear the defeat in her voice as soon as I tightened the first bolt, she knew it was over. I'll take my win, she probably won't let me win again!
Wasn't boring for me. Great work, as always. Three cheers for the afternoon crew.
Thanks for the support!
Nice to see the Afternoon crew, nice you have them.
They make the work more fun! 😃
@@vehcor are they your family or what
I had a shop for 4 yr and never had help like that. Thanks I do like what you do!! Keep Kicking
She is the best helper I have ever had! Thanks for watching.
Awesome job
I just told my daughter "Look, HIS DAUGHTER helps out in the garage! Where were you last week when I was working on your Toyota?!"
I was just wondering if that was his daughter and I went to the comments to see if anyone else asked, and this is the first comment I see lol
You had it easy with that tail gate. My ram has a wiring harness to deal with! Modern electrical convinces are nice but they have their drawbacks.
I'm glad it's "boring build Friday" (Saturday here in Australia when we get your video). I always look forward to your new video each week.
Just as well that you do bodybuilding, - those doors look really heavy. Looking forward to seeing the truck back on the road again. Hope you do a 10 minute video on the whole rebuild process, as it's always interesting to see a quick review of the entire build from start to finish.
Greetings from the other side of the world! I do work out but have always been able to handle the doors myself. I prefer not knowing exactly what they weigh, it might make them seem heavier. 😂 Thanks for the support!
Awesome job awesome video
Nice truck. It's so clean compared to the few we have here locally. Greetings from Norway.
Thanks, it is hard to find them this clean by me as well. Should make for an easy sale. Best wishes from the USA!
Another great video!
Thanks!
Wow that's a pretty slick operation there I like Kevin that lifts that's the only way to do what you just did looks good you still got enough Parts you could probably fix a couple more trucks
Another high quality rebuild👍
Thanks!
I paused at the beginning to say, cool! Another video to have my Saturday morning coffee to. Watching on now :D
Thanks for the support!
Good work
Thanks!
Good job....
Thanks!
Great video vechor love the hard work u do and the explanation in the process
Thanks!
Love those torque specs on the cab mounts! lol.
Cool work man 👍
Thanks!
Good job sir!
Thanks!
Cool, modern vehicles trim easy to put on... not so to take apart without breaking...
It takes some practice to get the wiggle and pull method just right! 😂
@@vehcor Correct- I spent hours once trying to remove a Chevy Volt rear bumper without damage... sure was interesting- then to replace 5 seconds.
I really feel for you, but you have that Knack and ability so few do.😎
Another awesome build, good job!
Thanks!
nice,,, I love to see pain process and in your future projects
Thanks!
Miss the g8 burnouts. Quality as always
Thanks, I'll see what I can do about some burnouts!
Great job 👍🏽
Thanks!
Great stuff.. thanks a ton for sharing.. be safe have a good weekend.
Thanks for the support! Have a great weekend!
I would love to see you do a Jeep Wrangler, they are almost guaranteed money. Please do!! It would help me in my build. Thanks and I LOVE your videos!!!! I def like and I’m subscribed!!! Keep up the good work brother
Wranglers are hard to find at a good price and the parts aren't cheap so the odds of me getting one that was worth it for me are slim. Thanks for the support!
Heck yeah it’s Friday. It’s video day I look forward to seeing it all week
Thanks for the support!
Love this channel!
Thanks for the support!
Didn't even realize today was Friday until I saw your video at 11pm
How can you miss Friday? 😂
Really good video saludos desde 🇲🇽
Thanks!
Your helper is very good, though sometimes a little cheeky... 😉👍
She has certainly learned a lot in a short amount of time and I love her comments. It makes working with her even more fun!
My 6 year old granddaughter loves watching your show with me, we are always trying to find "the smiley face". Now we found out his name is Mr. Spotty.
*Afternoon crew is trying to make you have to re-paint a fender lol gonna have to dock her pay a little. Marker lights/fishbowls? lol new sponge gaskets would solve that if you wanted to buff out the old ones. love the race at the end. Close but no cigar! no really, NO CIGAR they are unhealthy and toxic any way* :o)
No harm to the fender, accidents happen!
love the fridays!
Who doesn't! 😂
i feel bad i dont watch as often as i used 2... respect always!
No problem, I never watch!
Looks good. I wish I could get my "afternoon crew" to help me out a little more but thats OK.....lol. Im not a huge GM guy but unbolting a bed is SO much easier on those than dealing with the always seized giant Torx head bolts in a Ford truck. Going together nicely with your hand and muscle memory from so many rebuilds!
Hey I gotta give ford props on the front bumper on the super duty's just a few bolts and it comes right off and man that is so much nicer then chasing all the ones a gm or dodge has hidden in pain in the ass spots or where you have to remove other parts to get to.
I can pull GM cabs without removing carpet too! lol They really are easier to work on. I give Fords and Dodge a hard time but I don't dislike them. My afternoon crew is the best around! Thanks for the support!
Great build!
Great video like all way
Thanks!
Really enjoying this series of rebuilding! I rebuilt the front of an 05’ Silverado a couple of years ago, traded it for an 05’ Sierra. These trucks are so easy to work on, parts are not expensive and everything pretty much snaps together. I have to ask, what’s up with the piece of masking tape with the smiley face?🤔
I do like working on them. The tape focuses the camera quickly.
The afternoon crew got excited about reinstalling that bed rail cover 😂 Great progress!
We all must learn how to LIFT DOWN😂😂
The comments she comes up with and the goofing off make working with her that much more enjoyable! 😂
@@vehcor us clean freaks say your welcome .....today the hose ...tommorow safety glasses the next day...
the World!
one of us
one of us
one of us
one of us
one of us
@@clevelandmaker386 I don't want to be THAT guy but (assuming he hasn't already) wait until he has to go into the ER to get a shard removed.......THEN maybe he'll wear them.
@@muskokamike127 The only time I got stuck in the eye with metal and then with fiberglass I WAS wearing safety glasses.
@@marcosmaisterra4477 So you're blaming the safety glasses on you getting debris in your eye? That's false conclusions. That's like saying it only rains when you wear a rain coat therefore wearing a rain coat causes it to rain.
That's like stating that "since motorcycle riders get into accidents while wearing a helmet, wearing a helmet causes accidents".
Felt like it was just yesterday a video came out !ALMOST TO 100K subs ,keep up the good work!
I wish I was fast enough to do one a day! 😂 Thanks for the support!
Cool videos, i got a similar bed cover for my nissan frontier. Mine doesnt use the bed frame rails- it sits on top but nearly flush, its pretty lightweight but strong too.
I put my cab on with ratchet straps and a tractor... I need a lift! I enjoy the channel!
It works though
If there is a will, there is a way. I would be doing the same thing if I didn't have the cheating tools. It might put a dent in my turnaround time though! 😂 Good job getting it done!
Yawn.... I'm not bored. The grandkids got me up at 0415 and I've been waiting for this video all day!
I was up at 4:30 but my gym partner bailed! That darn afternoon crew only shows up in the afternoon! 😂 Thanks for the support.
Hes lucky to have afternoon crew mine are wish they were here like yesterday crew
Awsome I knew the old man could do it 👍
Thanks for the confidence!
Apparently cross fitting does absolutely nothing to hone door installation skills. Who knew? I certainly do appreciate your affinity for GM trucks as I too hold them in high regard.
Nope, they are only experienced with tires! 😂
@@vehcor 🤣
I like it alot, "Jim Carey accent" Keep the vids coming and after doing some research, I notice you're only 2 hrs away. Btw, my nephew brought a 04 Silverado with an engine rattle for 400 bucks. Turned out to be the honeycomb rattling around in the catalytic converter. Easy fix.
Thanks, nice score on the Silverado too!
Shout out to the Afternoon crew!
They say, "Hi."
Heck yeah came together
They usually do! 😂
Lov your work! Evan more details, slower assembly would be great.
Thank you! Curtis
Thanks, I do have a job to do and making videos isn't it. There are limits to make it possible to even make videos.
The Afternoon crew can wrench better than most men who have been at it for 10+ years
I love the videos, you really know your shit.
Thanks, years of practice!
When lifting those cabs off, where were your lift points, on the pinch seam or on the floor supports? Getting ready to do this exact job, just don't wanna mess the cab up.
as always............great detail..........easy to follow and learn from. Thanks! This is why content on the net, makes ordinary TV look as dumb as dog shit.
Hats off to the afternoon crew
Why not spray the left box side? Looks like its peeling near the bed rail @16:32. Love watching your work!
It is not. Thanks for watching.
if you can roll the windows down. the door will keep the window safe and you have a place to pick the door up with.
If you want to save your back you can make an attachment for an engine hoist, cherrypicker to lift and manoeuvre the doors.
That takes too long, there is very little stress on my back lifting doors the way I do.
U r the best
Love ur videos
Thanks for the support!
I must say I am disappointed with you. When working on Chevys, it is never boring. Painful, frustrating even idiotic at times, but never boring. 😏 Keep up the great work and keep these videos coming.
The Lamborghini fans don't agree with you! 😂
Nice job. Next time I'm in Illinois I will have to stop by when I drive my 66 Mustang up there . If I can find your place.
Mustang need a little body work. Looks like I can have it done in 2 hours. Plus a good cleaning. 😂😂😂
I don't do bodywork, I have guys for that!
@@vehcor what about cleaning ? 😄