I’m trying to upgrade my 2005 base model regular cab Silverado. It was my Grandpa’s farm truck. I’m using 2007 badges and 2007 aluminum OEM wheels on it. That’s because my late dad once owned a 2007 LTZ Silverado. My truck doesn’t even have carpet or a fold down console in the interior, but it will. I just ordered some new headlights and taillights for mine. Although, I picked the “black surrounded” headlights and the “smoked” taillights. I’m inspired by this video. My truck will not be the same after the wheels and lights are upgraded. It amazes me what’s possible to get done with just a mail order makeover. My grandpa would not buy a vehicle for any reason but use on his farm. I think that I can make it mine by just buying a few things and installing them myself. I have already bought everything I want, but the carpet and the radio. Again, thank you for the inspiration and another great video.
@@TWAMotorsports Thanks. I also want to use the 2007 “classic” hood and grille, but that’s only if I can find a good used hood that is the same color as my truck. That’s where the easy part ends. But since my truck is white, the most common color on the road, maybe it won’t be impossible. I’ve just had to spend the money slowly and carefully to find the things I’ve gotten so far.
I bought an 05 Avalanche bumper after I hit a deer. It had factory fog lights, and my 03 Silverado was an LS, so it didn't have fog lights. Thanks to others on RUclips, it was fairly easy to add the harness to my fuse panel and add a fog light switch. The fuse was wired already in the plug to the back of the cargo light connector and when I bought the fog / cargo combo switch, the fog light dash switch was connected automatically to the fuse in the fuse panel. I used Sea Light 360° fog lights. I'm now ordering new lights like you did. And I'll be be putting Sea Light bulbs in them too. Thanks to you, I got a preview of how they will look!
Funny thing is, I ordered new LED bulbs for my 06 Silverado to install after it's painted. Once you said the better bulbs have a set screw to adjust, I had to check my kit...looks like I ordered the exact same brand! Glad to hear you're happy with them.
I used those Sealight LEDs in my 97 Suburban in Spyder glass housings... They were about 'twice' the brightness of the OEM bulbs. I later rewired the headlights to use all four bulbs in the 'bright' mode... I now have a set in my '04 'cat-eye', I added the all-on mode for my brights for all of the country driving.
@@TWAMotorsports A lot of the LEDs have a big fan/heat-sink that will not fit without modifying the core support, which is why I chose the 'Sealight' fanless set (like the set you used). IMO Halogen bulbs are only to be used until they can be replaced with LED.
Used those LED’s on my 08 Tahoe and was super impressed! Did lots of research and for a cheaper budget set of lights…. Total win! Over a year and still impressed. Couldn’t find a Fog Led from them at the time and had to use another brand, but everything worked well together and the amount of visibility I gained on Low beam alone, Best money I ever spent. Slammed my 08 LTZ hoe & living in the country driving home at night from UPS…. I can see all the Deer, Skunks and other night time Lowered truck issues in the road. Thanks for the killer content, killer in-depth installs and doing kool things to trucks. Love to see you KO the red truck and back to the TA and maybe toss in Some kool Shop mods, work bench,even a little garage art for the walls. Keep on Busting them knuckles bro! Laterz!
I just did the same thing to my 03 Silverado-my old headlights looked just like yours lol. I ended up putting in AUXITO 9005 9006 LED’s from Amazon for under $70 for all four lights. What a HUGE DIFFERENCE! What an easy upgrade that only takes about 10 minutes!
Travis, truck is looking awesome as usual, don't understand why so many people run around with their trucks/cars headlights/taillights totally oxidized where they are just a blur of light, if I had an older truck that would be the first upgrade i would make, it makes a huge difference
I put some Fahren LEDs in my truck last December, the beam pattern is great, they are super bright and not super expensive for both the high and lows. they've been working great for about 11 months now. the ONLY issue I had is that I had to adjust 3 of them, but it's really easy. And they don't have the little end on them that obstructs the light.
@@TWAMotorsports yeah I highly recommend them, also thank you for the tip on painting the radiator support. I painted mine matte black and it definitely made the front end look better.
Looks tons better man! That was a issue with my shortbed i just sold it had 4 cluster lights on i continuously fought its one of the reasons I sold it.
Way cleaner look now! There are a lot of cheaper led high/low beam bulbs out there as long as you don’t go to low with the price, I usually stay 30 and above and I if I like something I make sure that in the reviews there are many to get a better picture of the product. Like you said, we work for our money to get something that’s going to work and not trash!
Good Thursday evening Travis. I'm just getting home from work and tuning in on my big screen tv with surround sound.. man it looks beautiful outside in Missouri by the looks of your video 🇺🇲
I kinda like the tan. It seems like whatever color console I am looking for I find the opposite color. If I need tan I can only find gray and vice versa. Lol
@@TWAMotorsports a few hours after posting this a tan one with lower dash pieces popped up on ebay and looked in really good condition. I paid out the ass but I been looking for a year lol
I am VERY curious about the process of adding fog lights into a silverado that never had them. Got a similar situation coming up in the near future. 06 silverado, base model, that never had any but I want to add some.
Yeah. Travis is the man. I added fog lights on my 13 model. The wiring from the switch to the main fuse panel under the hood was already there. I bought a kit that had the lights and wiring from the fuse panel to the lights. I had to take the fuse panel loose ( lever locks) and put a pinned wire in the panel. You will also need a light switch with the fog light option.
@@TWAMotorsports can you please do one and try to see if it’s possible to use the oem switch that would come with the truck had it come originally with the truck
Awesome video as always and that daily is looking better and better every video that comes out. Quick question Travis, would you happen to know where to find billet grilles for the 99-02 silverados or 99-06 tahoes? I deleted the bowtie on my grill shell and I can only find billet grills with the bowtie already cutout
Hey man, i have an 03 ss. Im looking to get better bulbs. Looking into led. What do you recommend now since its 2 years out from when this video was made. Thanks!
Your daily is looking good. I can't beleave how bad those other lights were. I'm I the only one that misses glass lights. Lol. Light sets would cost 600 bucks
I have the same hood but there is a gap between my grill and the hood, anyway you could send me the link to yours so I can see if it’s any different than mine
I noticed you kept the turn signals incandescent. I put in LEDs for the turn signals and they wouldn’t work when the headlights were on. Replaced with incandescent bulbs and the turn signals worked again. I replaced the flasher module with an electronic option. Any advice on how to get the LED turn signals to work properly? Thanks!
Quick question....I have the EXACT same truck and everytime I try to purchase what you have linked from Amazon, they always say it doesn't fit my truck?! 😢 confused as hell...😮 Can you put an amber LED in an amber lense?!
The daytime running lights unavailable on Amazon. That’s the only thing I did not get . Also Travis … when I look up tiny small light bulb on Amazon come Back as a license plate or dome light. Do you have the package part number and product.
So its been a couple of years since this video. My question is are both the headlight assembly and bulbs still working trouble free ( no moisture or yellowing ) ? I am thinking seriously about doing this on my 2500 HD.
I have an 03 Silverado z71 1500. I'm shopping for quality replacements. I've noticed some variants of part numbers. Do you have experience with TYC 20-6385-90 vs 20-6385-00? Also Some are listed as " 20-6385-90-1 or 20-6385-00-1" Looking for OEM equivalent. Thanks
@@TWAMotorsports They are. I was just seeing different TYC numbers. FYI, it seems that 20-6385-00 is for 2003-04 and 20-6385-90 is for 2005-06 (07 Silverado classic)
@@TWAMotorsports btw. Have you had good luck with this tyc brand headlight and keeping it clean? I've ordered some ebay ones twice and the larger top headlights always go yellow in about a year. Wondering if this brand is better?
Tried those TYC Headlights and they were HORRIBLE. Poor light pattern with major shadows and poor throw = Unsafe Nighttime Driving. The TYC DRL / Turn Signals were GOOD. Ended up polishing my 2004 OEM's for drastically better lighting performance.
I’m trying to upgrade my 2005 base model regular cab Silverado. It was my Grandpa’s farm truck. I’m using 2007 badges and 2007 aluminum OEM wheels on it. That’s because my late dad once owned a 2007 LTZ Silverado. My truck doesn’t even have carpet or a fold down console in the interior, but it will. I just ordered some new headlights and taillights for mine. Although, I picked the “black surrounded” headlights and the “smoked” taillights. I’m inspired by this video. My truck will not be the same after the wheels and lights are upgraded. It amazes me what’s possible to get done with just a mail order makeover. My grandpa would not buy a vehicle for any reason but use on his farm. I think that I can make it mine by just buying a few things and installing them myself. I have already bought everything I want, but the carpet and the radio. Again, thank you for the inspiration and another great video.
Sounds like a cool build. I'm sure your dad would love that.
@@TWAMotorsports Thanks. I also want to use the 2007 “classic” hood and grille, but that’s only if I can find a good used hood that is the same color as my truck. That’s where the easy part ends. But since my truck is white, the most common color on the road, maybe it won’t be impossible. I’ve just had to spend the money slowly and carefully to find the things I’ve gotten so far.
The best method to change out headlights, wish they went back to this
Totally agree with that
It's always amazing how well a fresh set of headlamps make a truck look. I got some for my sierra based on this video!
I agree. Completely changes the look
Looks good. I put led switchback bulbs in my turn signals and converted the drl's to blinkers with switchback bulbs. Looks and works great.
Nice. I need to try that some day
I bought an 05 Avalanche bumper after I hit a deer. It had factory fog lights, and my 03 Silverado was an LS, so it didn't have fog lights. Thanks to others on RUclips, it was fairly easy to add the harness to my fuse panel and add a fog light switch. The fuse was wired already in the plug to the back of the cargo light connector and when I bought the fog / cargo combo switch, the fog light dash switch was connected automatically to the fuse in the fuse panel. I used Sea Light 360° fog lights. I'm now ordering new lights like you did. And I'll be be putting Sea Light bulbs in them too. Thanks to you, I got a preview of how they will look!
Nice job. The sea lights is reasonably priced option
I really do like how that truck has come together, perfect clean daily
Thank you. More to come
Funny thing is, I ordered new LED bulbs for my 06 Silverado to install after it's painted. Once you said the better bulbs have a set screw to adjust, I had to check my kit...looks like I ordered the exact same brand! Glad to hear you're happy with them.
Thats awesome. They are the best bang for the buck.
I used those Sealight LEDs in my 97 Suburban in Spyder glass housings...
They were about 'twice' the brightness of the OEM bulbs.
I later rewired the headlights to use all four bulbs in the 'bright' mode...
I now have a set in my '04 'cat-eye', I added the all-on mode for my brights for all of the country driving.
Definitely brighter
@@TWAMotorsports A lot of the LEDs have a big fan/heat-sink that will not fit without modifying the core support, which is why I chose the 'Sealight' fanless set (like the set you used). IMO Halogen bulbs are only to be used until they can be replaced with LED.
I agree. Some don't fit
Used those LED’s on my 08 Tahoe and was super impressed! Did lots of research and for a cheaper budget set of lights…. Total win! Over a year and still impressed. Couldn’t find a Fog Led from them at the time and had to use another brand, but everything worked well together and the amount of visibility I gained on Low beam alone, Best money I ever spent. Slammed my 08 LTZ hoe & living in the country driving home at night from UPS…. I can see all the Deer, Skunks and other night time Lowered truck issues in the road.
Thanks for the killer content, killer in-depth installs and doing kool things to trucks.
Love to see you KO the red truck and back to the TA and maybe toss in Some kool Shop mods, work bench,even a little garage art for the walls.
Keep on Busting them knuckles bro! Laterz!
Thank you. Yeah that light is nice on country roads with anything dropped. Lol. Hopefully will be back in the ta in a few months.
Truck is looking great! Fog lights will look awesome! Great job as always, Travis!
Thank you
Really appreciate how thorough the video is
Thank you
I just did the same thing to my 03 Silverado-my old headlights looked just like yours lol. I ended up putting in AUXITO 9005 9006 LED’s from Amazon for under $70 for all four lights. What a HUGE DIFFERENCE! What an easy upgrade that only takes about 10 minutes!
Definitely an upgrade
I would like to know how they held up any condensation in the headlight ?
@MrSymbolic7 good while I had the truck
What a difference the new headlights made. Looks so much better.
Thank you. Its so much nicer at night too
Drives me nuts to see those braces through the grill. Such an easy fix. Great job. Trucks looking great
Thank you. Me too. Sticks out so bad
Lights and especially painting the brace made a world of difference. ✌
Thank you. Getting to be what I wanted
Auxbeam does have fan cooled 90° or L angle bulbs just like the factory so you won't have to worry about bulky fan clearance.
I need to try them sometime
I run Sealights in every vehicle I own. Great bulbs and I have yet to have a failure.
That's good to hear.
Always a good feeling when you make something on your pick up look fresh. Kool Vid Travis
Thank you. Getting there slowly
Looks good buddy. I have noticed that silver bar behind the grill. Looks so much better now. Thanks for the great video.
Thank you Larry. Its getting there
Can you share a link of the grill bowtie? Looks bad ass man🫡🫡
All parts I use I list in video description
Truck keeps looking better!
Thank you. More to come
Yes Add fogs lights
May do that
Travis, truck is looking awesome as usual, don't understand why so many people run around with their trucks/cars headlights/taillights totally oxidized where they are just a blur of light, if I had an older truck that would be the first upgrade i would make, it makes a huge difference
I agree with that. Such a simple fix.
I put some Fahren LEDs in my truck last December, the beam pattern is great, they are super bright and not super expensive for both the high and lows. they've been working great for about 11 months now. the ONLY issue I had is that I had to adjust 3 of them, but it's really easy. And they don't have the little end on them that obstructs the light.
Good to hear. May have to try them someday
@@TWAMotorsports yeah I highly recommend them, also thank you for the tip on painting the radiator support. I painted mine matte black and it definitely made the front end look better.
👍 yeah that paint makes things look cleaner
Truck is looking better with each upgrade...another great how-to Travis!😎
Thank you sir. Slow and steady
Looks good I had an accident on my 05 and had to to do the fr end thank you for sharing and adjusting the headlights 👍
You're welcome. Hopefully it helped
The truck is clean! Simple and clean. Nice wheels too 👍
Thank you
What wheels are those?
Link in video description
Great looking truck and upgrades too👍🏽
Thank you
@@TWAMotorsports question does your third brake light ever leaked???
No because I always replace them
I bought a large assortment of those black plastic push pins on Amazon due to them missing or breaking
I need to do the same.
Do you have part number?
I also run zevo had them in for about 4 years no problems with them
Yeah I have never had an issue
I literally said to myself at the beginning of the video, I'd paint those bars behind the grille.
Definitely better
6 on lights sound so good
Works great
Looks tons better man! That was a issue with my shortbed i just sold it had 4 cluster lights on i continuously fought its one of the reasons I sold it.
Thank you. Yeah they can be a pita sometimes
Way cleaner look now! There are a lot of cheaper led high/low beam bulbs out there as long as you don’t go to low with the price, I usually stay 30 and above and I if I like something I make sure that in the reviews there are many to get a better picture of the product. Like you said, we work for our money to get something that’s going to work and not trash!
Thank you. Yeah I imagine they make some cheaper leds for sure. First time trying ones like this and I am impressed
Good Thursday evening Travis. I'm just getting home from work and tuning in on my big screen tv with surround sound.. man it looks beautiful outside in Missouri by the looks of your video 🇺🇲
Thank you. It was nice that night
@@TWAMotorsports daily driver is looking better each time you do minor TLC to it awesome 😎👍
Thank you. I hope to keep moving on it.
@@TWAMotorsports Yes sir.. keep chipping away buddy.. and more part's arrive for your TA?
@@TWAMotorsports any plans for labor day weekend?
I got them in my truck and my Tahoe I and I think they work awesome
Thats good to hear
Dude I also have Sealights on my 2001, and I love them, very impressive for the price.
I agree. Great for the money
Did you ever do a video on installing the fog lights for the Silverado?
No
Lights look great
Thank you
Looks great
Thank you
Does tyc have "clears" for our Sierra/Silverado trucks?
No
Are the headlight adjustment measurements the same if the truck is lowered?! If so…what would they be..thnx!?
Yes. Measurements are based on dot on headlights
Update on the leds headlights?
They are doing great!!
I have a dark green 05 crew with the same wheels. Fixing to do 06 front end, all the housing and lights and do the drl mod
I love that color in these trucks.
@@TWAMotorsports me too, unfortunately I got stuck with the stupid tan interior. And finding a decent tan full center console has been futile
I kinda like the tan. It seems like whatever color console I am looking for I find the opposite color. If I need tan I can only find gray and vice versa. Lol
@@TWAMotorsports a few hours after posting this a tan one with lower dash pieces popped up on ebay and looked in really good condition. I paid out the ass but I been looking for a year lol
Well you got one.
Very nice they look great
Thank you
I am VERY curious about the process of adding fog lights into a silverado that never had them. Got a similar situation coming up in the near future. 06 silverado, base model, that never had any but I want to add some.
I may have to do a video on that then.
Yeah. Travis is the man. I added fog lights on my 13 model. The wiring from the switch to the main fuse panel under the hood was already there. I bought a kit that had the lights and wiring from the fuse panel to the lights. I had to take the fuse panel loose ( lever locks) and put a pinned wire in the panel. You will also need a light switch with the fog light option.
@@TWAMotorsports can you please do one and try to see if it’s possible to use the oem switch that would come with the truck had it come originally with the truck
Its actually almost plug and play on these trucks Larry.
I hope to make one
So adjusting the light .. will that close up the gap?
It can
Looks just like my truck 🛻
You must have good taste lol
Did you use the regular tyc lights of the nfs certified tyc lights? Looks so much better! I need to order a set for mine.
Thank you. Generally the nsf if available
Did you notice any play in the new top light housing? My driver side is a bit loose, seems like it needs to be pushed down into the clips more.
No issues whatsoever. Make sure bottom is in the grooves
TY VM real nice vid...gonna do with this brand...again Thank you
Thank you
Awesome video as always and that daily is looking better and better every video that comes out. Quick question Travis, would you happen to know where to find billet grilles for the 99-02 silverados or 99-06 tahoes? I deleted the bowtie on my grill shell and I can only find billet grills with the bowtie already cutout
I don't have any idea. May have to have one made
If you come up with a good source for the plastic clips for the radiator cover (besides GM) please post up a link.
Will do.
Do you have the link for the sealigths? I want to try them , your pickup look really good!
Link in video description
Much better looks great picked up an obs today lol
Thank you. Email me some pics. Don't leave me hanging lol
Sent you an email needs some work but starting to like the 2 tone lol
I love it
Thats my dream truck bro. Crewcab cateye
Thank you
Hey man, i have an 03 ss. Im looking to get better bulbs. Looking into led. What do you recommend now since its 2 years out from when this video was made. Thanks!
Yes. They were great
Good video with good opinions
Thank you
Your daily is looking good. I can't beleave how bad those other lights were. I'm I the only one that misses glass lights. Lol. Light sets would cost 600 bucks
I agree. Glass would be nice
I have the same hood but there is a gap between my grill and the hood, anyway you could send me the link to yours so I can see if it’s any different than mine
Probably have the wrong grille
I noticed you kept the turn signals incandescent. I put in LEDs for the turn signals and they wouldn’t work when the headlights were on. Replaced with incandescent bulbs and the turn signals worked again. I replaced the flasher module with an electronic option. Any advice on how to get the LED turn signals to work properly? Thanks!
Buying lasfit with built in error free is the only way I go
Where did you buy your black Chevy emblem on your grille??
Should be a link in video description if they are still available
Quick question....I have the EXACT same truck and everytime I try to purchase what you have linked from Amazon, they always say it doesn't fit my truck?! 😢 confused as hell...😮 Can you put an amber LED in an amber lense?!
You can but I generally don't.
Great info, thanks
Hopefully it helps
I’m about to do an led swap for my 04 Silverado should I use di-electric grease?
I don't on leds
The daytime running lights unavailable on Amazon. That’s the only thing I did not get . Also
Travis … when I look up tiny small light bulb on Amazon come
Back as a license plate or dome light. Do you have the package part number and product.
Which bulb are you talking about?
Hey bud do you have to order headlights individually?? Great vids Living the GM Dream
Generally I do. Link in video description
Will these work on a 1500 2006/2007 carryover model light truck
This is an 07 Classic truck so yes
So its been a couple of years since this video. My question is are both the headlight assembly and bulbs still working trouble free ( no moisture or yellowing ) ? I am thinking seriously about doing this on my 2500 HD.
They are still working great for the new owner
always clean oem+ stlye, never ricey
Thats my goal. Lol
Time for billet grille inserts that will look great 👍
I'm not sure how I feel about those.
I have an 03 Silverado z71 1500. I'm shopping for quality replacements. I've noticed some variants of part numbers. Do you have experience with TYC 20-6385-90 vs 20-6385-00? Also Some are listed as " 20-6385-90-1 or 20-6385-00-1" Looking for OEM equivalent. Thanks
I generally only use tyc. Parts used should be listed in video description
@@TWAMotorsports They are. I was just seeing different TYC numbers. FYI, it seems that 20-6385-00 is for 2003-04 and 20-6385-90 is for 2005-06 (07 Silverado classic)
Dark on the newer modela if I remember correctly
That truck looked great tho once the new headlights were in 😉
Lol. I agree
Way better
Thank you
i guess i need to paint my grill bars now since that's all i see when i look at my grill haha
Lol. Sorry to point that out
Hey man I have an 08 Yukon Denali awd. You think you could point me towards the right lowering kit. Looking for a 3/5 drop
Same parts I used on my 07 black one. Links in description of video
Travis give me the name again for the best lowering kit for the Sierra
I don't buy kits just individual parts. Link in all my drop videos
Are those led headlights working out so far?
Yes. I am still impressed
Painted the Temperature Sensor 😲 ?
No. May look like it though
@@TWAMotorsports BTW ... My OCD personality really appreciates your level of detail 😂
Lol. Thank you
fixing to do mine but iam going all led .....
Nice
Excellent video brother I work for everything I have as well thank you for taking the time
You're welcome. Glad I could help
So I want to buy these went to your link and on Amazon there is 2 options the tyc and the nsf certified what is the difference
Nsf is better and generally what I buy
Any recommendations on a good third break light
I buy stock ones
@@TWAMotorsports from dormen or do you have a link to one or point me in a direction to a good one cuz everything I've come across is garbage lol
Gm only
Headlight bulb link does not work.
Fixed
Do a 3/6 drop on it something that u can drive as a daily drop
Its coming. Need to finish the red one first
what year is this truck?
2006
@@TWAMotorsports Thank you. Really makes a huge difference, so much nicer. My 06 needs this desperately!
Thank you
Is that truck for sale ?
Already sold
🙌🏼
😎
Let me know when you get ready to sell this one!
Lol. Ok
@@TWAMotorsports btw. Have you had good luck with this tyc brand headlight and keeping it clean? I've ordered some ebay ones twice and the larger top headlights always go yellow in about a year. Wondering if this brand is better?
They last the longest out of all the ones I used before yellowing
👍👍👍👍👍
Thank you
Tried those TYC Headlights and they were HORRIBLE.
Poor light pattern with major shadows and poor throw = Unsafe Nighttime Driving.
The TYC DRL / Turn Signals were GOOD.
Ended up polishing my 2004 OEM's for drastically better lighting performance.
Interesting. Never had that issue
🤟🏽
👋
That’s my dream truck would you be interested in selling it please thank you sir.
Everything has a price
Slam it 😉
Oh its coming
GM vehicles are junk dude
Everyone has an opinion. I like them.
I doubt that
On the brand of the headlights! What's your opinion on quality and longevity?
Tyc is my favorite currently
The truck is clean! Simple and clean. Nice wheels too 👍
Thanks 👍