Thanks! I had no idea where the screws were. I had to clean out my mouse wheel It was clicking in while I was just trying to scroll. There was a little clump of dust in there, and some fibers wrapped around the wheel. Pulled it all out with some tweezers and tiny screwdriver and then blew it out with some electronics duster. Used a hair dryer to heat up the adhesive and put the plastic runners on the bottom back nice and flat. Cheers.
@@SeqMK I have the same problem. Today it just stopped working all of the sudden, no problem beforehand. A 'gentle' smack on the table solved the problem, but this is of course not a good solution. As the smack solved my problem I guess that the problem is either dirt between the wheel and the sensor or some loose contacts. I would love to find a solution also.
Thanks I used this video to fix my double click problem. In fact you do NOT need to replace the microswitch. You can disassemble the switch and re-bend the metal and it works great now. For more details on the microswitch search youtube for " Double click problem: How to fix faulty mouse button"
If you can't find the stakes online and still want to open up your mouse without ruining it (well not much anyway) Just find the location of the screws... and use an exacto knfe to bore/cut out a small opening to access the screws. It's better than removing the skates and won't ruin your mouse all that much. Mine feels the same after fixing it... (had a different problem with the scroll wheel though but still had to open it up)
If you're here because you need to fix the left or right switches on the Sensei 310, the switches you need are OMRON D2FC-F-K(50m). While I'm happy that I was able to fix this mouse, I'm never buying Steel Series again.
У меня в комнате убирали, и уронили мышь, теперь колесо при нажатии заедает в определенных местах при прокрутке. По ходу у всех такая проблема возникает. К сожалению, пока что нет дома мелкой отвертки, чтобы вскрыть мышь. Модель мыши SteelSeries Sensei [RAW].
Mine had broken cables that caused left click rnd liftoff, on pc boot i had to reconnect mouse to work, scroll was off. Thanks for the video really helped with proper connector plugs :) blck - red and right the rainbow colors ;]
Did you use the same skatez or whatever those things are called? Or you bought some new. I'm thinking of the things that you had to remove to get access to the screws.
Hi there my Roccat Nyth mouse recently stopped working.. it still lights up the usb lights, but the laser sensor does not light at all.. Where could I get a replacement sensor to fit. As I think this the problem.. If you could suggest places - be very thankful.. or any ideas to try! many thanks
У меня профессиональный флюс, но вы можете использовать любой. Это не имеет значения. Просто флюс для пайки. Провод опять можно использовать специальный продается в намотке для выпайки деталей, но можно просто снять оплетку с провода и ее использовать просто обильно намажьте ее флюсом и такой провод заберет на себя весь припой и деталь спокойно сможете снять с платы.
Hi I have the sensei and one of my forward and back buttons on the left side of the mouse got pushed in while using Do you think it would be fixable ? the button still clicks but when I move it up it could go inside the mouse, also one more question If I take the mouse feet off could I put them back on easily ? or would the stickiness go away it would be good to know Hope you reply :)
+TheGunmanGaming (Gunman889) You can try to disassemble and see what's inside. If you need to replace the parts. Glue on the legs nice and they prikleyutsya again. Only when you bend them to separate them. They should be smooth.
What problem are you repairing? What exactly was done in this repair? Replace left mouse button? I was pulling on the cable to massage the braiding to make it soft and messed up my Sensei MLG Edition. It started to drop windows that I click and drag and seems to have some clicking problems with the left mouse button. I already got a new mouse that I love for gaming, Mionix Castor. But I still love the sensei for 3d design and would still like to repair it What do you think the problem could be? I'm sure it was caused by massaging the braided cable.
+800Tech Hello i have had sense for several years and recently my right mouse button started skipping 1 click ever 20ish clicks and id like to try to repair it , ive read that u said u replaced your mouse button but where did u buy spare mouse button for sensei to replace it with
+Falcon Lover Did you end up doing the carbon fiber wrap on your Sensei? Just wondering how it worked out for you, as I'm going to buy the supplies and new mouse feet to do the same thing for my Sensei.
I have a problem where the middle mouse button is not working. The mouse wheel is pushed all the way in and is stuck in that position. Do you think it is as easy to repair that type of problem as a broken left click switch?
+Ivan Aomie Можно использовать от любой мышки. От кабеля не так много зависит. Или просто укоротите свой кабель обрезав то место которое протерлось или повреждено.
Привет. Во время работы стало глючить колесо прокрутки, а потом вовсе перестало работать, перезагрузил компьютер и мышка перестала реагировать полностью, в SS Engine не определяется (пробовал переустановить - не помогло), Windows издает звуки подключения USB устройства. Проверил на другом компьютере - не работает. Что делать, подскажи пожалуйста.
Cломался правый переключатель на мышке SS Rival. Новый переключатель я так не смогу припаять. Разобрал сломанный перключатель,, там развалилась какая та медная пластинка. Попробовал поставить эту пластинку из другой мышки, а она отличается по форме, кое как засунул его туда. Кнопка начала работать, но без клика. Подскажите где взять оригинальные переключатели как на Ривале или может быть на омронах такая же пластина эта???
hi, i have steelseries rival 600, the system sees the mouse, connects, the drivers work fine, I reshuffled, and the usb drivers reinstalled, but the mouse does not work, and the backlight does not light up on the mouse either. (during the firmware the steelseries backlight comes on) is there any hope or in the trash?
Do you have replacement parts? I need a leftclick switch, the mouse is already open and I have the old one un-soldered already.. I'm not sure where to buy mouse switches.
800Tech What's Inside? I just used a switch from a different mouse. ..It looks like click switches are standardized which is good. I was expecting the sensei to use custom switches
Здравствуйте! Скажите пожалуйста, D2FC-F-7N(10M)/20M/50M отличаются только долговечностью? У меня полетела ЛКМ на Сенсее, вот решил поменять, и я так думаю лучше заказать 50М? P.S. Лайк поставил, музыка на отличненько, но товарищ ниже прав, похожая играла в проне 70-х. :)
I checked this video to learn how to disassemble my mouse. I accidently dropped my mouse in a cup full of tea, and it got completely drenched. The display underneath it stopped working, but otherwise it seems to work just fine, but the buttons are sticky and almost get stuck, can I just wipe everything off with a damp cloth? Guessing the display is broken for good, but that's alright, I don't see any need for it anyways (it shows a faint glow but doesn't display the steelseries logo anymore)
+Mikael Skog I do not use the display and think it is not necessary. You need to disassemble a mouse and clean and wash all alcohol. Then dry and everything will work fine.
I have replaced my left mouse micro switch with the exact same one i ordered online, and it fitted perfectly and it clicks perfectly but it doesn't respond when clicked, my right , middle and everything else works but the button i replaced doesn't respond. could it be that i burned something from the circuit is that possible ?
My scroll is blocking in pressed position, very often when i just scroll down. To relase scroll button i need to scroll up or press it a little harder. I found out that scroll is rotating very hard. Any advices before screwing it to parts? I want to stay with my actual skates because they're in great condition.
It happens to me randomly when scrolling down, that the page comes back up, and in that case if I lightly taps on the wheel, without rotating it, the page goes up and down continuously, then if I rotate it by one "notch" returns to normal operation. I have tried with both the SteelSeries Enigne running and with it turned off, and it does anyway, so I don't think it's software dependent. I must say that my Sensei Raw is about 6 years old, and I have had this problem for about a year, initially less pronounced, but in recent months it has become quite annoying. I would be more for the replacement than for the repair, not being practical in these things, but I read in the various product reviews that the quality of the mice has dropped a lot in recent years (but not the price) and that today's mice tend to give problems within just 6 months. Reading the reviews passes the desire to change mouse, I don't know what to do ... Sorry for "my" English, I'm a foreigner
Hi, I recently tried to clean the wheel, it didn't look dirty, in fact it had only a few threads of dust, but incredibly now it's back to work, I still struggle to believe that the problem was due to those few threads of dust, I just ran wheel holding the tip of a toothpick on the sides, so I think this action has probably somehow put it back in place. I hope this is lasting, and that it wasn't just a momentary stroke of luck.
+FsT Можно подобрать что-то подходящее, но если честно у меня не было времени искать и я просто поменял левый и правый выключатель местами. Левый у меня работал, но не очень хорошо. Так как правой кнопкой пользуюсь редко там он не лоставляет неудобств.
I temporarily solved it. It seems that the mouse inside gathers dirt, mainly by sweat, or if you eat, you may have your hands dirty. So, grab your mouse, and start shaking it really really hard, that solved my problem 2 times now.
Слушай, у меня есть мышка, у него все лампочки работают, а сам курсор вообще не двигается, раньше мышка периодически отключалась, но сейчас вообще здохла, не подскажешь, в чем может проблема?
Soldering pro-tip. Buy a damn hobby vice to hold your work! It clamps easily to any desk or table(Some have suction bases.) Stop trying to make two hands do the work of three!! And people wonder why I stopped teaching basic electronics repair when the students had the proper tools at their disposal.
My Sensei Steelseries has stopped working, well it works fine usually, but sometimes when I lift it up and places it down on the desk again, it loses connection to the computer and i have to replug the USB cable to the computer again for it to work again, any idea how to solve this problem?
Hello I see this comment is 2 months ago and I wanted to ask if you managed to solve your mouse issue, your answer would be really helpfull for me, ty.
Hello, any luck fixing this issue? I am having the same problem with the mouse losing connection....I also am having to unplug and plug it back in to work but it's happening more frequently and I'm not able to identify the root cause.
thanks bro for this video that helped me alot, iwant to ask if you are repair this left click or change it with a new one ,( ihave left prblm somtimes doesnt shoot on game only )
Подскажи пожалуйста что может быть мышь СС кана 2 переодически отключалась сейчас почемуто моргает и ни чего не работает .Где то оболом кабеля или ей конец?
I tried to replace the switch in two different mice, and one of them didn't work. Do you think I damaged the board or something with overheating? I don't think the replaced switch had any issue as I tried the same switch on different mouse and it worked. Just to let you know that the changed switch doesn't work and other switch (right-click) works just fine. Can you give any tips on what probably went wrong and how to correct it?I tried to replace the switch in two different mice, and one of them didn't work. Do you think I damaged the board or something with overheating? I don't think the replaced switch had any issue as I tried the same switch on different mouse and it worked. Just to let you know that the changed switch doesn't work and other switch (right-click) works just fine. Can you give any tips on what probably went wrong and how to correct it?
i have the same mouse and my right click button doesn't always work after a few clicks it won't respond for a few clicks and the reaction time gets slower, what would i do if i opened it?
Друг +1 тебе ! вопрос такой колесиком кручу на себе с начало страница вниз идёт потов резко верх (крушит на себя страница вниз верх) разобрал почистил вроде нет нет но глюканет! Что можно ещё сделать с ней?
Mine keeps randomly disconnecting or connecting, anyone knows whats the problem? i have same mouse as video. Ive had mine for 8 years, and i still want to use this one. they are hard to find
+CofeeAuLait If you separate them carefully, it can be stuck on the old Scotch. You can take a new double-sided adhesive tape. If nothing, then you can paste any glue.
ah crap, I just noticed my 80 euro mouse started not registering every click. i have to click with some force for the clicks to register. the mechanical switch might have corroded and i'm probably going to solder another on there. I'm pretty glad that i soldered these switches from my old mouse so i have some spares.
hey guy, i fixed my mouse! replacement is not the only option! I am pretty glad i soldered off these mouse switches from my previous broken mouse so i could use one of them to fix my sensei. saved 80 euro :D. so my tip is: if you have a broken mouse, solder off the switches and keep them or if you have an expensive mouse like the sensei which has failing switches, try finding a cheap/broken mouse to salvage the switches from. you just need a soldering iron and a multimeter is also handy. These switches are also nice to have if you ever mess around on a breadbord since the pins are spaced so they can be put in breadbords. you can probably also buy them for cheap online though.
good day man. my sensei are in good shape, R/L click still works and all the lightings but except the laser sensor bro. it drivng me crazy. the mouse cursor wont move :( . can you help me. what is this problem? :(
When i scroll every few scrolls it goes the wrong way, it's a major pain in the ass not only for scolling down websites but also i use hammer editor and fl studio, with both i constantly have to scroll and it's making this simple task super frustrating ! Would i be able to fix this issue by opening my mouse ? Cause i don't want to take off the pads if i'm not sure i can fix it, i might fuck it up :s
I managed to fix it ! Had to open my mouse and apply some force with a pair of pliers on the little box next to the scroll wheel, now the wheel doesn't click as much as it used to which i actually prefer, the smoother scrolling is great !
I've had my mouse for less than a month, maybe they need to be built better. but what do I know... honestly nothing. but my left mouse button has stopped working again and this is the second time.
Thanks! I had no idea where the screws were. I had to clean out my mouse wheel It was clicking in while I was just trying to scroll. There was a little clump of dust in there, and some fibers wrapped around the wheel. Pulled it all out with some tweezers and tiny screwdriver and then blew it out with some electronics duster. Used a hair dryer to heat up the adhesive and put the plastic runners on the bottom back nice and flat. Cheers.
i love how you skip over removing the mouse wheel, the most common problem on the mouse and you take that part out
lol too true why i'm looking at these vids right now
its also the reason why im searching for ss sensei mouse videos(mousewheel click problem) to begin with and he straight up cut it. ROFL
Yep my encoder is also broken now, well is still works but skips sometimes...
@@kevin-zv7dg My wheel click stopped working recently. Did you find any helpful video about a fix?
@@SeqMK I have the same problem. Today it just stopped working all of the sudden, no problem beforehand. A 'gentle' smack on the table solved the problem, but this is of course not a good solution. As the smack solved my problem I guess that the problem is either dirt between the wheel and the sensor or some loose contacts.
I would love to find a solution also.
Thanks I used this video to fix my double click problem. In fact you do NOT need to replace the microswitch. You can disassemble the switch and re-bend the metal and it works great now. For more details on the microswitch search youtube for " Double click problem: How to fix faulty mouse button"
Thanks
If you can't find the stakes online and still want to open up your mouse without ruining it (well not much anyway)
Just find the location of the screws... and use an exacto knfe to bore/cut out a small opening to access the screws. It's better than removing the skates and won't ruin your mouse all that much.
Mine feels the same after fixing it... (had a different problem with the scroll wheel though but still had to open it up)
x2 speed recommended for this video.
Thanks for the video. I used it to find out how to open the mouse so I could lubricate that annoying squeeky mouse wheel.
+Sakal Mon Ok
+Sakal Mon Good news! I will do the same.
Ok
Thanks mate, my mouse wheel is functional again! Couldn't have done it without you.
Thanks! My sensei had a broken USB cord
It helps to heat the glue for the teflon feet with a hair dryer, than they come off better...
TheRailroad99 uhh my doesn’t work when I plug it in
@@bigsosa1417 before or after the repair?
If you're here because you need to fix the left or right switches on the Sensei 310, the switches you need are OMRON D2FC-F-K(50m). While I'm happy that I was able to fix this mouse, I'm never buying Steel Series again.
I dig the porn groove
My Rival 310 mouse wheel has gotten a little loose. Any way to tighten it?
Thanks dude, just cleaned my wheel - was super gunky!
У меня в комнате убирали, и уронили мышь, теперь колесо при нажатии заедает в определенных местах при прокрутке. По ходу у всех такая проблема возникает. К сожалению, пока что нет дома мелкой отвертки, чтобы вскрыть мышь. Модель мыши SteelSeries Sensei [RAW].
Mine had broken cables that caused left click rnd liftoff, on pc boot i had to reconnect mouse to work, scroll was off. Thanks for the video really helped with proper connector plugs :) blck - red and right the rainbow colors ;]
my middle button has stopped working for like almost a year
is it fixable?
that porn music helps very much
What micro switch did you replace it with?
and whats the button is called? it should be numberd to get this kind of switch again
Привет, не подскажешь какие переключатели стоят в ней?
Did you use the same skatez or whatever those things are called? Or you bought some new.
I'm thinking of the things that you had to remove to get access to the screws.
I stuck old ones in place
Конечно, зачем делать сверхнадёжное колёсико из оптопары, если можно сделать светящийся логотип
Бизнес
Does ripping of the padding underneath affect the adhesive or will it still stick fine?
Sticks fine
Привет, почему-то стала очень туго нажиматься правая кнопка мыши, не подскажешь, с чем это может быть связано? Мышь Steelseries sensei raw
Can I replace cabel on my sensei raw with the cabel from rival 300?
Hi there my Roccat Nyth mouse recently stopped working.. it still lights up the usb lights, but the laser sensor does not light at all.. Where could I get a replacement sensor to fit. As I think this the problem.. If you could suggest places - be very thankful.. or any ideas to try! many thanks
Привет,если не сложно,напиши что ты использовал для пайки,что за гель,и что за провод через который отпаивал старый свитч?
Заранее спасибо!
У меня профессиональный флюс, но вы можете использовать любой. Это не имеет значения. Просто флюс для пайки. Провод опять можно использовать специальный продается в намотке для выпайки деталей, но можно просто снять оплетку с провода и ее использовать просто обильно намажьте ее флюсом и такой провод заберет на себя весь припой и деталь спокойно сможете снять с платы.
Hi I have the sensei and one of my forward and back buttons on the left side of the mouse got pushed in while using Do you think it would be fixable ? the button still clicks but when I move it up it could go inside the mouse, also one more question If I take the mouse feet off could I put them back on easily ? or would the stickiness go away it would be good to know Hope you reply :)
+TheGunmanGaming (Gunman889) You can try to disassemble and see what's inside. If you need to replace the parts. Glue on the legs nice and they prikleyutsya again. Only when you bend them to separate them. They should be smooth.
+800Tech Thanks !
Hi dude, what type of click switch or model do u use to replace it? and is it complatible?
Mine broke aswell and its written on the button , mine is steelseries rival 310 and i had to order OMRON D2FC-F-K (50 m) but it depends on ur model.
What problem are you repairing? What exactly was done in this repair? Replace left mouse button?
I was pulling on the cable to massage the braiding to make it soft and messed up my Sensei MLG Edition. It started to drop windows that I click and drag and seems to have some clicking problems with the left mouse button. I already got a new mouse that I love for gaming, Mionix Castor. But I still love the sensei for 3d design and would still like to repair it
What do you think the problem could be? I'm sure it was caused by massaging the braided cable.
+Matthew Mawson Yes I changed the left mouse button, because it worked badly.
+800Tech Hello. Can you take apart just the outer shell? I doing a carbon fiber vinyl on the outer shell.
+800Tech Hello i have had sense for several years and recently my right mouse button started skipping 1 click ever 20ish clicks and id like to try to repair it , ive read that u said u replaced your mouse button but where did u buy spare mouse button for sensei to replace it with
+Falcon Lover Did you end up doing the carbon fiber wrap on your Sensei? Just wondering how it worked out for you, as I'm going to buy the supplies and new mouse feet to do the same thing for my Sensei.
Its pretty cool. I like the look. As long as you can get the shell off safely, it is a cool project.
Hey,is there any possibility to repair the left click as mine feels a bit soft and lose?
I have a problem where the middle mouse button is not working. The mouse wheel is pushed all the way in and is stuck in that position. Do you think it is as easy to repair that type of problem as a broken left click switch?
This is same
у меня нужно поменять кабель на мышке (мышка Sensei) что посоветуешь сделать или какой лучше использовать кабель от какой мышки ?
+Ivan Aomie Можно использовать от любой мышки. От кабеля не так много зависит. Или просто укоротите свой кабель обрезав то место которое протерлось или повреждено.
+800Tech я уже подчинил , укоротил немного и спаял , вот и все , спасибо )
@@aomiee мышка еще живая? что с ней случилось после стольких лет использования?
@@lilvayzer1597 живая еще как пользуюсь так же каждый день не чего кроме кабеля больше не ломалось только чистилось и все
@@aomiee друг хочет подарить свою(себе покупает какуюто новую),думаю брать в подарок или нет :DDD
sensei raw shell on this mouse? can use?
what screws do the steelseries sensei use? (What screwdriver did you use to open it)
Take an ordinary small cross-head screwdriver
yah the wheel fix didnt work
Привет. Во время работы стало глючить колесо прокрутки, а потом вовсе перестало работать, перезагрузил компьютер и мышка перестала реагировать полностью, в SS Engine не определяется (пробовал переустановить - не помогло), Windows издает звуки подключения USB устройства. Проверил на другом компьютере - не работает. Что делать, подскажи пожалуйста.
Cломался правый переключатель на мышке SS Rival. Новый переключатель я так не смогу припаять. Разобрал сломанный перключатель,, там развалилась какая та медная пластинка. Попробовал поставить эту пластинку из другой мышки, а она отличается по форме, кое как засунул его туда. Кнопка начала работать, но без клика. Подскажите где взять оригинальные переключатели как на Ривале или может быть на омронах такая же пластина эта???
+Александр Киналевский Вы можете найти другую более дешевую или сломанную мышку и взять переключатели оттуда. Они обычно очень похожи.
+800Tech а можно вместо родных переключателей стилсириес, к примеру купить омроны и припаять их?
+Александр Киналевский Там обычный переключатель. Можно использовать любой. Главное чтобы он мягко нажимался.
800Tech спасиб
hi, i have steelseries rival 600, the system sees the mouse, connects,
the drivers work fine, I reshuffled, and the usb drivers reinstalled, but the mouse does not work, and the backlight does not light up on the mouse either.
(during the firmware the steelseries backlight comes on) is there any hope or in the trash?
Do you have replacement parts? I need a leftclick switch, the mouse is already open and I have the old one un-soldered already.. I'm not sure where to buy mouse switches.
+goaliedude32 Sorry. No. I am only for myself repairs done.
800Tech What's Inside?
I just used a switch from a different mouse. ..It looks like click switches are standardized which is good. I was expecting the sensei to use custom switches
Здравствуйте! Скажите пожалуйста, D2FC-F-7N(10M)/20M/50M отличаются только долговечностью? У меня полетела ЛКМ на Сенсее, вот решил поменять, и я так думаю лучше заказать 50М?
P.S. Лайк поставил, музыка на отличненько, но товарищ ниже прав, похожая играла в проне 70-х. :)
I checked this video to learn how to disassemble my mouse. I accidently dropped my mouse in a cup full of tea, and it got completely drenched. The display underneath it stopped working, but otherwise it seems to work just fine, but the buttons are sticky and almost get stuck, can I just wipe everything off with a damp cloth? Guessing the display is broken for good, but that's alright, I don't see any need for it anyways (it shows a faint glow but doesn't display the steelseries logo anymore)
+Mikael Skog I do not use the display and think it is not necessary. You need to disassemble a mouse and clean and wash all alcohol. Then dry and everything will work fine.
me regalaron este hermoso raton y la verdad tuve miedo de desarmarlo en mi caso era el cable pero funciona de 10 actualmente. gracias toma tu like
а эти переключатели отдельно где-то продаются ?
Конечно но нужно поискать. Можно взять от другой мышки
а не подскажите модель переключателя?
а не подскажите модель переключателя?
I have replaced my left mouse micro switch with the exact same one i ordered online, and it fitted perfectly and it clicks perfectly but it doesn't respond when clicked, my right , middle and everything else works but the button i replaced doesn't respond. could it be that i burned something from the circuit is that possible ?
My scroll is blocking in pressed position, very often when i just scroll down. To relase scroll button i need to scroll up or press it a little harder. I found out that scroll is rotating very hard. Any advices before screwing it to parts? I want to stay with my actual skates because they're in great condition.
Try to make out. Perhaps you will see the reason. There may be garbage inside. Take it away.
It happens to me randomly when scrolling down, that the page comes back up, and in that case if I lightly taps on the wheel, without rotating it, the page goes up and down continuously, then if I rotate it by one "notch" returns to normal operation.
I have tried with both the SteelSeries Enigne running and with it turned off, and it does anyway, so I don't think it's software dependent.
I must say that my Sensei Raw is about 6 years old, and I have had this problem for about a year, initially less pronounced, but in recent months it has become quite annoying.
I would be more for the replacement than for the repair, not being practical in these things, but I read in the various product reviews that the quality of the mice has dropped a lot in recent years (but not the price) and that today's mice tend to give problems within just 6 months. Reading the reviews passes the desire to change mouse, I don't know what to do ...
Sorry for "my" English, I'm a foreigner
Thanks
Hi, I recently tried to clean the wheel, it didn't look dirty, in fact it had only a few threads of dust, but incredibly now it's back to work, I still struggle to believe that the problem was due to those few threads of dust, I just ran wheel holding the tip of a toothpick on the sides, so I think this action has probably somehow put it back in place. I hope this is lasting, and that it wasn't just a momentary stroke of luck.
Do I have 2 use that lube for the re-soldering process? Or is it even lube?
It's flux. It's better to use some but not necessary.
goku thanks!
those poor gliders will be so fucked 😹
Можешь подсказать по ремонту мышки Sensei
+JG Что именно интересует?
+800Tech подскажи, какой микрик на кнопку колеса стоит(я про mouse3)? сломался, жмется нормально, но не работает ни в какую.
+FsT Я не смотрел какой именно. Подобрал от другой мышки.
+FsT Можно подобрать что-то подходящее, но если честно у меня не было времени искать и я просто поменял левый и правый выключатель местами. Левый у меня работал, но не очень хорошо. Так как правой кнопкой пользуюсь редко там он не лоставляет неудобств.
My left button is doing multiple clicks, as a result, I can't drag and drop stuff
Mine doing exactly the same
I temporarily solved it. It seems that the mouse inside gathers dirt, mainly by sweat, or if you eat, you may have your hands dirty. So, grab your mouse, and start shaking it really really hard, that solved my problem 2 times now.
thanks man, helped me lol
easy repair :D
thanks man!
Which type of screwdriver is required to open mouse? hard to see on video :/
Philips
@800Tech
I have steelseries sensei Raw. My middle mouse click has stopped working but the scroll wheel is working perfectly.
Can it be fixed?
+anonov himnov You need to try to change the switch. Done as well as on my video. Just another switch.
is there a way to remove some weight? I find it extremely heavy
No
Слушай, у меня есть мышка, у него все лампочки работают, а сам курсор вообще не двигается, раньше мышка периодически отключалась, но сейчас вообще здохла, не подскажешь, в чем может проблема?
Не знаю. Тут нужна диагностика. Думаю для данной мышки ремонт уже не оправдан если нет гарантии
Soldering pro-tip. Buy a damn hobby vice to hold your work! It clamps easily to any desk or table(Some have suction bases.) Stop trying to make two hands do the work of three!!
And people wonder why I stopped teaching basic electronics repair when the students had the proper tools at their disposal.
Thanks bro. finally i can open it :v
My Sensei Steelseries has stopped working, well it works fine usually, but sometimes when I lift it up and places it down on the desk again, it loses connection to the computer and i have to replug the USB cable to the computer again for it to work again, any idea how to solve this problem?
Hello I see this comment is 2 months ago and I wanted to ask if you managed to solve your mouse issue, your answer would be really helpfull for me, ty.
Hello, any luck fixing this issue? I am having the same problem with the mouse losing connection....I also am having to unplug and plug it back in to work but it's happening more frequently and I'm not able to identify the root cause.
First time I grabbed my Sensei Pro out of the box... bow-chicka-bow-wow was he first thing that came to mind. :D
I didnt see how you took off the mouse clicker, please help
thanks bro for this video that helped me alot, iwant to ask if you are repair this left click or change it with a new one ,( ihave left prblm somtimes doesnt shoot on game only )
It is necessary to change the switch
mm yeah thank you i didnt find i switched left with right its work perfectly now thanks you so much
Подскажи пожалуйста что может быть мышь СС кана 2 переодически отключалась сейчас почемуто моргает и ни чего не работает .Где то оболом кабеля или ей конец?
Это нужно смотреть так сразу не скажешь
how do you fix a broken scroll wheel?
I got the same problem, and trying to guess what is wrong. Mouse looks not overcomplicated, thats good.
atleast you could have inform us whats the deffect of the mouse
I tried to replace the switch in two different mice, and one of them didn't work. Do you think I damaged the board or something with overheating? I don't think the replaced switch had any issue as I tried the same switch on different mouse and it worked. Just to let you know that the changed switch doesn't work and other switch (right-click) works just fine. Can you give any tips on what probably went wrong and how to correct it?I tried to replace the switch in two different mice, and one of them didn't work. Do you think I damaged the board or something with overheating? I don't think the replaced switch had any issue as I tried the same switch on different mouse and it worked. Just to let you know that the changed switch doesn't work and other switch (right-click) works just fine. Can you give any tips on what probably went wrong and how to correct it?
I do not know
What is this Flux Plux that are u using.. is it necessary to do that or can i just replace the mouseclicker without it?..
+thereisnofuture blaze it
You can replace without him. This liquid for easier soldering
+800Tech thx bro
can you teach me brand of screwdriver?
This is China. No Brand.
oh thank you. then I will find fit for me
Подскажи, что делаеть если периодически не срабатывает клик правой кнопки*?
+Зеликов Александр Менять выключатель. Подобрать его легко, можно взять от дешевой старой мышки например.
Спасибо большое, а подойдет выключатель с любой старой мышки?
i have the same mouse and my right click button doesn't always work after a few clicks it won't respond for a few clicks and the reaction time gets slower, what would i do if i opened it?
+Amir Khan same problem here... i think i gonna open it and watch in.
what did u do
Друг +1 тебе ! вопрос такой колесиком кручу на себе с начало страница вниз идёт потов резко верх (крушит на себя страница вниз верх) разобрал почистил вроде нет нет но глюканет! Что можно ещё сделать с ней?
Если там все чисто, то даже не знаю. А точно это не программный сбой? На другом компе проверяли?
да на другом пк был тест тоже самое. по гуглив такая беда не только у меня одного.
what clicker is compatble for steelseries? can i use the OMRON brand?
You can use any that fit the size
Чувак,хэлп
Мышь вырубается при резких движениях
Как можно отремонтировать?
+1437egor Тут не знаю. Нужна диагностика. Попробуйте ее почистить для начала.
+800Tech Спасибо , уже сам починил
был повреждённый участкок на кабеле , обрезал и спаял , вот и все
Mine keeps randomly disconnecting or connecting, anyone knows whats the problem? i have same mouse as video. Ive had mine for 8 years, and i still want to use this one. they are hard to find
That is a very sexy scrwdriver, sire. What would you use to glue the pads back?
+CofeeAuLait If you separate them carefully, it can be stuck on the old Scotch. You can take a new double-sided adhesive tape. If nothing, then you can paste any glue.
где взять кнопку?
Можно из другой старой мышки
what if the mouse's light blinks, does this repair it?
I have the same problem. Do u know how to fix
@@kakagaming2319 nop my mouse died after that
@@analogue11 I guess my mouse is broken too then
@@kakagaming2319 if it's old like mine was then yes.
it had an electrical short-circuit.
@@analogue11 mine is old
ah crap, I just noticed my 80 euro mouse started not registering every click. i have to click with some force for the clicks to register. the mechanical switch might have corroded and i'm probably going to solder another on there. I'm pretty glad that i soldered these switches from my old mouse so i have some spares.
Yes the only option is a replacement
hey guy, i fixed my mouse! replacement is not the only option! I am pretty glad i soldered off these mouse switches from my previous broken mouse so i could use one of them to fix my sensei. saved 80 euro :D. so my tip is: if you have a broken mouse, solder off the switches and keep them or if you have an expensive mouse like the sensei which has failing switches, try finding a cheap/broken mouse to salvage the switches from. you just need a soldering iron and a multimeter is also handy. These switches are also nice to have if you ever mess around on a breadbord since the pins are spaced so they can be put in breadbords. you can probably also buy them for cheap online though.
So why in the fuck does my left click button want to sink and not stay the fuck up
my scroll wheel is not working, i can only click it but i can't scroll it
Try to disassemble and clean. Could just get dirt
good day man. my sensei are in good shape, R/L click still works and all the lightings but except the laser sensor bro. it drivng me crazy. the mouse cursor wont move :( . can you help me. what is this problem? :(
I dont know. Try to see can there dirt got.
When i scroll every few scrolls it goes the wrong way, it's a major pain in the ass not only for scolling down websites but also i use hammer editor and fl studio, with both i constantly have to scroll and it's making this simple task super frustrating !
Would i be able to fix this issue by opening my mouse ? Cause i don't want to take off the pads if i'm not sure i can fix it, i might fuck it up :s
I think you got mud there. Try to open and clean.
I managed to fix it ! Had to open my mouse and apply some force with a pair of pliers on the little box next to the scroll wheel, now the wheel doesn't click as much as it used to which i actually prefer, the smoother scrolling is great !
Thanks! Had the same issue for a long time, finally decided to disassemble and take a look inside, now it works as intended.
what exactly did you do? I have the same issue.
what about laser :c
Link for rival 100?
Does anybody know if the new RAW sensei cover is compatible with the old 2009 SS sensei?
How about mouse5 button my sensei raw mouse5 button is not working and weak
Made same
left mouse click is stuck as i type this gonna see if i can remedy the issue
Здравствуйте, уже как год мучает писк колеса на данной мыши, что посоветуете. мб чем нибудь смазать?
слушай а как провод снять?
Там разъем по моему
How to fix rival 100 left mouse stop working
I thing like this mouse
+pattanapong chirabandhu Mine right button doesnt work on rival :/
can I have that mouse I’m stuck with a steelseires rival 300
My right mouse button stopped working. Where can I buy the replacement?
For me the white taster on left click button just snapped and i cant do anything about it -.-
same happened here
very ussefull! thanx for the video
my scroll wheel does not work when I click, it just works to scroll the help, please!
whats with the sexy music?
I've had my mouse for less than a month, maybe they need to be built better. but what do I know... honestly nothing. but my left mouse button has stopped working again and this is the second time.
So you have a guarantee. Give back in repair.
really cool music
Thanks
Funk on brother.
my mouse is shaking when i aim in like cs and stuff, someone knows how to fix? thanks
That means your sensor isn't detecting proper smooth surface. If it's a smooth surface, then maybe your sensor has some problem.
wtf its with this `70 porn music?
Worst soldering i have ever seen xd