Yeah absolutely you’re not carrying the extra weight of the transfer case and drive shaft or CV shafts, there’s also less rotating mass and you can rev the engine up higher than an automatic. I thought a couple times about removing the 4 x 4 and throwing in a stick for fun but it may be more fun to have four-wheel-drive launches ;)
@@In_His_presence4ever Life! lol New computer but the builder lost some of my videos in the process.....Working on recovery! Hopefully I'll have it up soon.
My 2003 liberty has survived 2 t bone accidents, driving in ditches, and careless lack of maintenance from my cousin. Now that it’s mine I’m surprised it even runs. They are TOUGH
All you fellas Subscribed! Made ol boy feel upbeat and Special! Keep up the good work Fella’s.. should start me a channel, nah just kidding! I’d feel the Guilt!
They are coming, I’m in the process of rebuilding my computer as it wasn’t able to keep up with the editing. It’s a bit tricky getting GPUs right now as there’s a shortage.
Has it been that long?? Life gets in the way I guess lol Still held up by my computer lots on the go no time for the rebuild also still waiting for a new GPU
Hey bud, I had issues with the PC. After a fresh build the videos files weren’t able to be edited under video pad editor as they were moved to a new drive. I have someone trying to sort out the issue so I can access the files in a different editing program. I do have one Video you can watch but it’s not the greatest. I’ll unlock it now have a look
I haven’t spent a dollar on mods’s, Head gasket blew so during the head rebuild I did a bunch of free mods and porting. Didn’t spend one single dollar outside of the gaskets. It would actually cost way more to re-gear this jeep because you have to do the front diff to match the rear gearing as well.
I’ve done a ton of things! Some are still a secret though! Deleted the intake resonator, Ported the throttlebody, gasket matched the intake to the heads, ported the heads, modified the combustion chamber, opened the exhaust ports, ported the exhaust manifolds, modded the injectors and timing, modded the trans to shift harder…. Lots and lots lol
@@garethmckerrell6888 It could be but I enjoy building and modifying engines so this is the route I chose. Plus the only cost was the timing chain and gasket set.
Teach me good sir. Lol. I'm pretty decent with a wrench. Not really trying to. Make her a race rig. But it would be nice to have a little more get up then she has. I'm not gonna lie, alot of what u said went right over my head. I'm newer to engine mods. I've always loved cars but is say the last 5 or 6 years I've been getting more into my own engine work and all that so I'm more then willing to learn. Thanks for the reply BTW
I’ve got another video done, however I can’t Get it to download from my editor without a bunch of glitches in it. I’m waiting on a new video card for my computer but there is a shortage of them at the moment. As soon as I have it fixed I’ll post the video. Sorry for the wait!!
I can get my Liberty wheels to spin. Just gotta be wet outside haha
Put it in first dawg it'll spin with no water trust
Picked a 03 liberty up yesterday that's rwd and 5 speed behind the 3.7 definitely very easy to spin the wheels with a stick
Yeah absolutely you’re not carrying the extra weight of the transfer case and drive shaft or CV shafts, there’s also less rotating mass and you can rev the engine up higher than an automatic. I thought a couple times about removing the 4 x 4 and throwing in a stick for fun but it may be more fun to have four-wheel-drive launches ;)
Maybe just list the upgrades till the next video is available. I'm interested
Subbed, can’t wait to see the mods!
Look forward to it, got a 2008 I'm slowing customizing. Would like to see what you have done, gotta wait I guess!
It won’t be too long!
I’ve got a few videos I’m editing now.
@@restosandrevivals4597 what happened to the video?
@@In_His_presence4ever Life! lol New computer but the builder lost some of my videos in the process.....Working on recovery! Hopefully I'll have it up soon.
@@restosandrevivals4597 I seriously need a V8 in my liberty 🗽
My 2003 liberty has survived 2 t bone accidents, driving in ditches, and careless lack of maintenance from my cousin. Now that it’s mine I’m surprised it even runs. They are TOUGH
Any updates on a new video upload??
All you fellas Subscribed! Made ol boy feel upbeat and Special! Keep up the good work Fella’s.. should start me a channel, nah just kidding! I’d feel the Guilt!
Closed course in Mexico 🤣
How do you do that to a liberty?
Show. Us. The. Mods.
My liberty had no problem
Lucky. I’m at the dealership every other week for some odd issues that they fail to fix every time and I have to bring it back it over and over.
Let's see the mods!
They are coming, I’m in the process of rebuilding my computer as it wasn’t able to keep up with the editing. It’s a bit tricky getting GPUs right now as there’s a shortage.
Prob put a SB chevy in it lol.
5 months... you still alive ? 😂😂😂
Has it been that long?? Life gets in the way I guess lol Still held up by my computer lots on the go no time for the rebuild also still waiting for a new GPU
You ever gonna upload anything about the mods to this????
Hey bud, I had issues with the PC. After a fresh build the videos files weren’t able to be edited under video pad editor as they were moved to a new drive. I have someone trying to sort out the issue so I can access the files in a different editing program. I do have one Video you can watch but it’s not the greatest. I’ll unlock it now have a look
@@restosandrevivals4597 oh my god wow thank you for responding! I'll look at it in a little bit!
@@michaelthompson2401 any time! I can’t tell you how disappointed I am after doing all this work and spending so much time filming it all!
I beat a bmw 3 series in my fully stock liberty, they get up and go from a dig with that low gearing
Instead of spending so much on mods for a few hp gains, just re gear your differential with the same price. Then, your Jeep will ride like a Hemi!
I haven’t spent a dollar on mods’s, Head gasket blew so during the head rebuild I did a bunch of free mods and porting. Didn’t spend one single dollar outside of the gaskets. It would actually cost way more to re-gear this jeep because you have to do the front diff to match the rear gearing as well.
So what all did you do to it. I have a k&n air filter and aftermarket exhaust... That's about it... What else do I need.
I’ve done a ton of things! Some are still a secret though!
Deleted the intake resonator, Ported the throttlebody, gasket matched the intake to the heads, ported the heads, modified the combustion chamber, opened the exhaust ports, ported the exhaust manifolds, modded the injectors and timing, modded the trans to shift harder…. Lots and lots lol
@@restosandrevivals4597 so pretty much just easier to buy a 5.7 hemi haha
@@garethmckerrell6888 It could be but I enjoy building and modifying engines so this is the route I chose. Plus the only cost was the timing chain and gasket set.
Teach me good sir. Lol. I'm pretty decent with a wrench. Not really trying to. Make her a race rig. But it would be nice to have a little more get up then she has. I'm not gonna lie, alot of what u said went right over my head. I'm newer to engine mods. I've always loved cars but is say the last 5 or 6 years I've been getting more into my own engine work and all that so I'm more then willing to learn. Thanks for the reply BTW
Also I'm waiting for those reveal videos...
But he didn’t
Didn’t what?
@@restosandrevivals4597 didn't show us the upgrades haha
Great video!!!well done!!!!I would like to ask is it possible to install manual transmission 5 speed and maintain the option of the 4 wheel drive???😉
No
I actually don't know
@@krilll1829 Thank you very much for your response!!!!
Thats jacked up, whats the mods dude.
Map sensor?
Any update?
I’ve got another video done, however I can’t Get it to download from my editor without a bunch of glitches in it. I’m waiting on a new video card for my computer but there is a shortage of them at the moment. As soon as I have it fixed I’ll post the video. Sorry for the wait!!
You are gonna be waiting months if not years to get a gpu bud, maybe just upload a raw video you can always use a laptop as well.
I am most interested in what you did the the combustion chamber when you had the heads off just curious
What do you have done to the transmission?
Nothing yet but, I do see it as a weak point and plan to address that later on.