THANK YOU SO MUCH KEITH...JUST PURCHASED A 2009 GL320 CDI FROM A CAR AUCTION...PRESTINE CONDITION....BUT.....THE ENGINE BAY WAS ALL UPSIDE DOWN....I AM NOT A MECHANIC...BUT I WATCHED YOUR VIDEOS AND YOU SAVED ME OVER $5000 ON DEALER REPAIRS ( LABOR ONLY )... I ACTUALLY WORKED ON FIXING THIS GL320...AND SHES RUNNING GREAT LIKE NEW....THE ONLY PROBLEM NOW IS THAT I HAVE A STORED CODE P1408 WHICH IS EMBEDDED INTO THE COMPUTERS MEMORY...SO MY CHECK ENGINE LIGHT IS ALWAYS ON...MY ONLY OPTION IS TO GO TO THE DEALER AND HAVE THE COMPUTERS MEMORY ERASED AND RESET....I EVEN HAVE AN iCARSOFT 2 OBD SCANNER SPECIFICALLY ONLY FOR MERCEDES....BUT I CANNOT GET RID OF THAT P1408 CODE....BUT YOUR A GENIUS KEITH...YOU MADE A NOVICE MERCEDES MECHANIC OUT OF ME....👍💓🙂
Good video. Sound advice that takes the mystery out of owning a MB. Agree to the icarsoft scanner is good. Should come with the car... you'll need it to make sure you aren't being ripped off by the stealers.
Much respect 💯for such a great channel. My2002 W203 wagon has given me its share of problems dealing with ESP and BAS and your channel has been TOPS. God bless you🙏 and to a speedy recovery 🙏and keep up with the GREAT content👏👏👏!
Thank you, but, suv shuts off after being driven for 3-4 mls and starts again like a hot or cool issue, had rear brakes replaced on my 2006 ML500, thank God you are better be safe you and your family 🙏🏾
Hello, excellent video. I have W164 with M272 engine. I want to add a rare fault that faulty ABS sensor can do. "Diff Lock overheated" message popped out on instrument cluster and the cure was to change faulty abs sensor.
Hi Keith, glad you are back and are feeling better. I love your helpful videos. Thank you! I have a question and could really use your help and guidance. I have a MBenz GL450 and when I'm driving and come to a stop-sign or red light...the right side warning sensor keeps beeping until the car starts moving again. Very annoying...I'm not sure what is causing this...any idea? Would love to save some money right now. Thanks Mike
2010 ML 350 blu-tec Having these errors.. replaced wheel speed sensor on front right and left rear so far.. still getting error messages for all 4 wheel speed sensors after installing the sensors.
Hi Keith, super channel. Question (2012 GLK 220 4-Matic, X-204): I replaced the sensor for the left front wheel, then got a diagnostic fault for the ABS ring (part of the wheel bearing), so I cleaned the ring which looks undamaged, even tried a new bearing, but the error remains with the multiple warnings on the dashboard. Also replaced the main battery 3 weeks ago. What should my next step be? I have a later model of the scanner you use but am still learning to use it. Thanks🕊️
Do the Mercedes Benz ml 350 will show a break light warning with I need to change it?!! Please answer ASAP I have this model and I need to know urgently. Thank you in advance!!
Hi! I was hoping maybe you could give me some advice on my 2007CLK 350 my driver side window and also my two back windows are not working and I can’t get them up they are not all the way down they are stuck about 2 inches from the top I just put a new switch in and they are still not working.. I don’t know anything about cars LOL
Good day, Sir. Have you encountered the issue when Mercedes ML350 blocks the wheel while driving because of the issue with driving sensor connector clip not stable connection? I replaced the sensor recently but did not connect the connector properly. As result on the railroad intersection, on bumpy rails, vibration caused the unstable signal from sensor and my car blocked the opposite wheel entirely. Very dangerous. Then i looked in internet and found the story when the same happened to the guy while he was driving at the speed of 140 km/hour. No stop light as you can guess. I mean the ABS computer should disable the system bot blocking the weel! Maybe there was a call back due to this reason or maybe upgrade of the software version. Mine is Ml 350 2011 year. Thank you
I have a Mercedes Benz GL350 Bluetech 2012, I can't connect my Bluetooth Audio, I have my phone connected so when someone calls me I can hear them, but music doesn't want to play, can you help me please? Thank you.
i have in my sam rear a error mercedes benz ml320 cdi ( the output of component f4kr(circuit 15r relay has short circuit to ground) and my right brake light and reverse dont turn on any help well be appreciate thanks
Hi,im Having problem with my 2012 s350cdi w221,its underpowered-no faultcodes and engine will stall if i brake fast,any ideas?thanks(ps three faultcodes in abs 724700 active,511200 stored,600100 stored)
WELCOME AS Yours CHANEL IS FANTASTIC AND HELP ALL READY MANY TIMES I HAVE A QUESTION IF I CAN, THIS IS STORY, 2006 MERCEDES R350, AT THE BEGINNING I GOT ABS ESP LIGHT CHECK THE SPEED SENSORS ON Scanner LIVE DATA ITS LOOK Are THEY OK , I ERASE FAULT CODES FROM ABS ESP BUT NOW CAR BRAKING ALONE AND STRANG NOISES COMING FROM ABS BREAKING ,Their IS NO ANY MORE LIGHT ABS ESP ONLY AS IT HAPPENS YELLOW Triangle FLUSHING THE ONLY CODE WHAT I HAVE NOW IS 5557 NO CAN DATA WAS RECEIVED FROM CONTROL MODULE N51 AND CODE 905 D Component F58KH . Any AID WHAT COULD BE A REASON.?
iRepair Autos you mean the headlight motorbike? Mercedes representative said that it is the broken headlight engine that the adapter no longer works, but it works for me!
THANK YOU SO MUCH KEITH...JUST PURCHASED A 2009 GL320 CDI FROM A CAR AUCTION...PRESTINE CONDITION....BUT.....THE ENGINE BAY WAS ALL UPSIDE DOWN....I AM NOT A MECHANIC...BUT I WATCHED YOUR VIDEOS AND YOU SAVED ME OVER $5000 ON DEALER REPAIRS ( LABOR ONLY )...
I ACTUALLY WORKED ON FIXING THIS GL320...AND SHES RUNNING GREAT LIKE NEW....THE ONLY PROBLEM NOW IS THAT I HAVE A STORED CODE P1408 WHICH IS EMBEDDED INTO THE COMPUTERS MEMORY...SO MY CHECK ENGINE LIGHT IS ALWAYS ON...MY ONLY OPTION IS TO GO TO THE DEALER AND HAVE THE COMPUTERS MEMORY ERASED AND RESET....I EVEN HAVE AN iCARSOFT 2 OBD SCANNER SPECIFICALLY ONLY FOR MERCEDES....BUT I CANNOT GET RID OF THAT P1408 CODE....BUT YOUR A GENIUS KEITH...YOU MADE A NOVICE MERCEDES MECHANIC OUT OF ME....👍💓🙂
Good video. Sound advice that takes the mystery out of owning a MB. Agree to the icarsoft scanner is good. Should come with the car... you'll need it to make sure you aren't being ripped off by the stealers.
Much respect 💯for such a great channel. My2002 W203 wagon has given me its share of problems dealing with ESP and BAS and your channel has been TOPS. God bless you🙏 and to a speedy recovery 🙏and keep up with the GREAT content👏👏👏!
Glad you are back. Gods plan
Just purchased the icarsoft so tomorrow i will see if its just the sensors. Thank You Sir!
Thank you, but, suv shuts off after being driven for 3-4 mls and starts again like a hot or cool issue, had rear brakes replaced on my 2006 ML500, thank God you are better be safe you and your family 🙏🏾
Hello, excellent video. I have W164 with M272 engine. I want to add a rare fault that faulty ABS sensor can do. "Diff Lock overheated" message popped out on instrument cluster and the cure was to change faulty abs sensor.
Thanks for that! That's a valuable addition to our solutions and remedies
Good to know you are back.
Hi Keith, glad you are back and are feeling better. I love your helpful videos. Thank you! I have a question and could really use your help and guidance. I have a MBenz GL450 and when I'm driving and come to a stop-sign or red light...the right side warning sensor keeps beeping until the car starts moving again. Very annoying...I'm not sure what is causing this...any idea? Would love to save some money right now. Thanks Mike
Thank you for another excellent video. And I'm glad you are feeling better.
Nice to see you back, stay safe my friend , thanks for all your videos
2010 ML 350 blu-tec Having these errors.. replaced wheel speed sensor on front right and left rear so far.. still getting error messages for all 4 wheel speed sensors after installing the sensors.
Glad you're back sir!
Stay safe and healthy.Keep up the good work 👍
Thank you, I will
Glad you filling better
Hi Keith, super channel. Question (2012 GLK 220 4-Matic, X-204): I replaced the sensor for the left front wheel, then got a diagnostic fault for the ABS ring (part of the wheel bearing), so I cleaned the ring which looks undamaged, even tried a new bearing, but the error remains with the multiple warnings on the dashboard. Also replaced the main battery 3 weeks ago. What should my next step be? I have a later model of the scanner you use but am still learning to use it. Thanks🕊️
Get well!
Sir glad to b here and learn lot of issue solving tip ...sir does brake pad ware sensor open circuit can cause this dtc ?? Pls reply
Do the Mercedes Benz ml 350 will show a break light warning with I need to change it?!! Please answer ASAP I have this model and I need to know urgently. Thank you in advance!!
Hi! I was hoping maybe you could give me some advice on my 2007CLK 350 my driver side window and also my two back windows are not working and I can’t get them up they are not all the way down they are stuck about 2 inches from the top I just put a new switch in and they are still not working.. I don’t know anything about cars LOL
Check your fuse end relay
Hi, what about, b23ab1d??? Right caliper. But front or rear? Ty
Good day, Sir. Have you encountered the issue when Mercedes ML350 blocks the wheel while driving because of the issue with driving sensor connector clip not stable connection? I replaced the sensor recently but did not connect the connector properly. As result on the railroad intersection, on bumpy rails, vibration caused the unstable signal from sensor and my car blocked the opposite wheel entirely. Very dangerous. Then i looked in internet and found the story when the same happened to the guy while he was driving at the speed of 140 km/hour. No stop light as you can guess. I mean the ABS computer should disable the system bot blocking the weel! Maybe there was a call back due to this reason or maybe upgrade of the software version. Mine is Ml 350 2011 year. Thank you
I have a Mercedes Benz GL350 Bluetech 2012, I can't connect my Bluetooth Audio, I have my phone connected so when someone calls me I can hear them, but music doesn't want to play, can you help me please? Thank you.
i have in my sam rear a error mercedes benz ml320 cdi ( the output of component f4kr(circuit 15r relay has short circuit to ground) and my right brake light and reverse dont turn on any help well be appreciate thanks
Hi,im Having problem with my 2012 s350cdi w221,its underpowered-no faultcodes and engine will stall if i brake fast,any ideas?thanks(ps three faultcodes in abs 724700 active,511200 stored,600100 stored)
WELCOME AS Yours CHANEL IS FANTASTIC AND HELP ALL READY MANY TIMES I
HAVE A QUESTION IF I CAN, THIS IS STORY, 2006 MERCEDES R350, AT THE
BEGINNING I GOT ABS ESP LIGHT CHECK THE SPEED SENSORS ON Scanner LIVE
DATA ITS LOOK Are THEY OK , I ERASE FAULT CODES FROM ABS ESP BUT NOW CAR BRAKING ALONE AND STRANG NOISES COMING FROM ABS BREAKING ,Their IS NO ANY MORE LIGHT ABS ESP ONLY AS IT HAPPENS YELLOW Triangle FLUSHING THE ONLY CODE WHAT I HAVE NOW IS 5557 NO CAN DATA WAS RECEIVED FROM CONTROL MODULE N51 AND CODE 905 D Component F58KH . Any AID WHAT COULD BE A REASON.?
Hey Keith, hope you are doing better. Thanks for this video. Can you get apparel like the jacket you are wearing?
Thanks Deborah. I have seen these jackets on ebay; I got mine from the dealership.
@@iRepairAutos Do you pay full price at the dealership?
No, I don't.
@@iRepairAutos I will check Ebay 1st. How much at the dealership?
Hello,plecase help me,i have Mercedes Benz ML w164...with this error ACTIVE LIGHT FUNCTION INOPERATIVE! I don’t now how rezolv this error
One of your headlight motors is stuck. You will need to get this part checked and possible changed.
iRepair Autos you mean the headlight motorbike?
Mercedes representative said that it is the broken headlight engine that the adapter no longer works, but it works for me!
I am getting a C1100 error on my brakes. Have installed ll new speed sensor. Can't clear the error?
Re-check your sensor connections. Unplug them and inspect the electrical pins for dirt etc. Clean and reinstall. I would check the wiring as well.
Found the problem. Rodent had chewed the wire. Car was pretty abused when I purchased it.... but, it is on he road to recovery.
Thank you, get well. Are you cousin to Lonnie Rashid Lynn, Jr? Vou have talent.
Not sure, but we are all related in some way or the other.