@@Junkopartna well that was unexpected… they both just have a different connection to skateboarding and they are focused on getting better 24/7 and understanding everything to a T. They are master minds in skateboarding who thrive to become better than they were the day before. They are legends in the skateboarding community and speaking on non existent conditions, (in their cases) is just disappointing to see. The amount of disrespect is just ridiculous and I hope you grow to learn how to appreciate those geniuses rather than putting them down for absolutely no reason… much love no disrespect towards you whatsoever i don’t judge anyone because we all have our own journey we’ve been through in life!!!
Andy Anderson ! George Powell ! Collaborating to bring you the world's Cutting Edge technology in skate! Thank you for providing us with information about new products that will help support active living. In my opinion new cutting-edge equipment helps give the rider confidence. thank you to Nigel and crew for providing us with these videos that we may enjoy for the rest of our lives.
It is awesome to see Andy get so excited about a board shape he is in tune with all aspects of skateboarding. What a chill dude with insane amounts of technical knowhow to change the industry one piece at a time.
Believe in yourselves and each other and never give up on your dreams and aspirations and remember to be kind and uplifting to each other and open minded and genuine and respectful and humble.
The Heron changed my life! The egg was something I wasn’t ready to benefit from. This board has me excited in ways I’ve never experienced. Thank you Andy for continuing to grow and innovate with a clear mind and earnest enthusiasm!
Did the Heron chip a lot and stuff for you, or not too terrible? I'm ready to buy my second board and excited about Andy's stuff. The eggs are all sold out - wonder if I should wait for this 3rd version, or just pick up a Heron 1.
@@gregmossed the Heron can chip a little but I find it to be negligible. I have been through 3 of them in 2.5 years and I still skate my first one as a banger board and though I did cut it down due to severe razor tail, it has no bad chips in it (still feels poppy too). For me, you can’t go wrong with a Heron 9.13. Even if you decide you want a smaller board you will not regret having a Heron in your quiver;)
@@Legend_of_Rick_G Thanks! As a beginner I'm not doing stair sets or anything so it's not like I'm particularly hard on boards. I think I'll try it out.
I would bet no one before has ever put so much thought into the design of a skateboard. So awesome!! Andy isn't just a great skater, he's revolutionary.
I would love to see this with a minimalist top graphic of all the flick lines of the tricks Andy explained. Put some clear grip tape on it and it'll be sooo nice 👌👌👌👌
Andy's mad scientist brain is reshaping how skaters are going to skate. He takes so many micro adjustments on his boards that will make certain trick easier. His in depth explanation just about how the board shape will make tre flips easier just shows his shapes will impact on other skaters and how they're going to think a ton more about their shapes. People talk about skating essentially reaching a peak, but this approach to design is where you're going to see skaters doing more with their equipment which in turn will allow them to push more boundaries, which Andy is already on the cutting edge of doing already.
@@dans2833 it's not marketing though. This is Andy implementing his ideas in his own shape. If pros already do such fine tuning in their shapes, you never hear it or see it. If it was in fact all marketing, then EVERY skater would have some weird shape and it would be pushed all over, and it's not. You just see this with Andy and his board.
Y’all should do a grip tape with color coded arrows showing where to flick for newbies kinda like how they have color coded fret boards for beginner guitar players
The pockets, concave, and structural shape absolutely has a freeride longboard feel to it. There are places to lock in, or easily move your feet to, while allowing you to feel/read every position on the deck at the same time. It's absolutely brilliant, it's going to be epic trying to wring out every bit of this deck's potential! I'm definitely down to shred this deck to find out everything it can do👍‼️
Prediction: another symmetric one but mirroring the opposite corner (or a slight variation thereof) of his original shape. So stoked to hear all about it!
@@archimedes131Totally. I see that the deck he's showing here is an 8.1! I haven't skated a board that small in awhile. I hope he makes a bigger size. If not, I'll just give a try.
@@SuriSanJose it's that small at the smallest point but almost 8.4 at the widest (near the bolts...and on both ends no less)....AND it supposedly helps. *shrug* at least worth a try. ...I'm just getting back into skating after a bunch of years...so I can't really test much of it out yet (if ever)...but it makes so much sense in my head.
Please add an User's Manual or quick starting guide or something like that, so people (or at least me) can learn how to use every single area of the deck :-) I've got every other Heron and Egg (my fav) decks, and I can't wait to have this new one.
Thank you Andy. I always like you explaining your new boards. I love that it's a twin and my favourite thing is the sharp kickflip edge where you know where your foot is without looking.
This design is giving me Christian Hosoi hammerhead mirrorred, and just a touch of snowboard energy. Not sure it will sway me from my Heron Egg love but I'm up for the challenge.
Glad to see the design progress for twin shape skateboards. I think of some analogs to professional snowsports instruction, if you learn from "one of the good ones" there is no goofy/regular and the equipment supports you to absorb what is already a pretty daunting task of sliding around 🙂 Andy's description of making equipment that is predictable is spot-on!
I just got the symmetrical one a couple weeks ago and it's my favorite skateboard I've had. Looking forward to getting the Nano Cubics as well when they release bigger sizes.
Try the Modes skateboarding wheels, 55mm and 95A (the dragon formula from Andy anderson last year was 93A), bigger, very similar and better than 97A, small difference, big fun.. 64mm 95A for the mini cubic, good choice too
@@viracocha03yeah, it is powell parelta and they have only one symmetrical board. and this symmetrical is 8.7. they should make smaller. just make 8, 8.25, 8.5. man, c'mon.
@@mehmetfratozgun6858 I thought it was 9.5 in the middle, my bad. But either way, as much as I live the shape its a bit wider then I would prefer. I'm still riding it currently tho.
This board is 8.5 at the widest, 8.2 in the middle :) skates like something in between 😊 symmetrical like the egg, with all the features from my first board !
I really like seeing how Andy breaks down the mechanics of skating when he designs stuff. We are all pretty lucky that he's been able to partner up with Powell Peralta / George who are up to the challenge of pushing the state of the art forward.
Andy, my first board back will be this new one. As soon as I saw it I need it.. I havnt actually skated hard in many yrs. When I do skate it's just to get to A-B. But this board makes me wanna go hard and relearn. This board makes more sense and looks like it'll also be great for rails the way the nose/tail is. I really like this shape.. Andy not gaslighting you but you contributed so much to the community with your ideals..
i love that &y explains everything in such small details so everyone understands where he is coming from with that shape. this helps new skaters out so much to progress. does not shock me that his other board was the best selling deck. more ppl need to see this!
Andy… you’re an inspiration, man! You put intelligence in skating. Those things go together well: Inspiration and Intelligence. Bam!!! Thanks for the fun video, guys!
Excellent review of Andy's new board. I'm a 57-year-old non-skater that enjoys the content. The information here about how to use the board features is incredible. Consider doing a series on this stuff, and I would bet you get a million views... Thanks for the content.
I'm on my 3rd Heron flite deck now- Biggest gripe is price....$300 for deck, $40 Rails, $15 Grip, that $350NZD for a consumable....on top of just sourcing one which is a journey in itself. The Egg was not me at all- But this look more up my ally.
I love how truly passionate Andy allwaes is when talking bout his shapes love seeing some one put that much thaught in to anything that is going to have his name on it
Reminiscent of some of the ideation behind the Thing decks by Schmitt sticks. As for tricks all this realizations come from experience and breaking it down. So glad Andy has the resources to be able to realize these ideas and experiment as well as the platform to explain, expose and sell these concepts to more of the mass, who these days are more open to these concepts. Timing is everything. Just waiting to see if he tackles the concept of the 1 bearing wheel.
I don't even skate and I just watched a 22:44 video of Andy explaining the shapes of his board😅. His enthusiasm makes everything he does so fun to watch.
Much love and respect to you and your channel Nigel. I hope that all is well for you and your family and friends and I hope that all of your dreams and aspirations come true and that you are safe during your travels and adventures and skateboarding and while recording your videos and going live on RUclips.
This is along the lines of an interview with Rodney Mullen. Intellectually insane. This is the most interesting interview with so much insight. What a master mind and master class. So cool.... cheers....
Dude I'm all about this board, just watched this much later unboxing and skating at Braille and I hope this catches on. What intention dude I thought maybe it was a beginner board at first but just like the current board it was just designed to do things better, JUST like this. I'm sold dude
I love how it has devoured so many modern cruiser adaptations while marrying them and bending them to be what they need to be for a great all rounder trick deck.
@@morrisalanisette9067 I mean literally! No! he designs the board tells the maker what he want but he doesn't physically make the boards the factory does he designs it
I am so glad to see more products from Andy. He doesn't have enough already. In fact, I don't buy Powell products for a year, just because they seem to have a new wheel or deck every month!!!
i felt like i was watching a scene in pineapple express where james franco explains his creation to seth. but in all seriousness, im glad andy is this passionate about things, legitimately shows and we need more passionate people in this world.
Came for a rad new shape and received a college course on what your feet do during tricks. Wish there was a mailing list or something for when this drops, I don't wanna miss it!
I'm super excited to get the board and the new wheels! It'd be cool to maybe have griptape to show to flick and pressure spots like they do on some baseballs to show how to throw certain pitches. That'd be perfect for my ADD ass
I have seen many shaped boards since I started skating in 1986. I remember seeing a aDanny Way DW board and it was 9 inch wide and that was too skinny, then I rode it and eventually owned that deck. Modern skaters think boards are too wide if they are over 8.5.
![Eminem - Like My Shit [Official Audio]](http://i.ytimg.com/vi/vx_IMvFkrfA/mqdefault.jpg)
I’d love to see Andy and Mullen interview each other. They’re a couple of the most passionate individuals in skateboarding right now. Imo
That would be a deep conversation.
Both equally as autistic too
@@Junkopartna well that was unexpected… they both just have a different connection to skateboarding and they are focused on getting better 24/7 and understanding everything to a T. They are master minds in skateboarding who thrive to become better than they were the day before. They are legends in the skateboarding community and speaking on non existent conditions, (in their cases) is just disappointing to see. The amount of disrespect is just ridiculous and I hope you grow to learn how to appreciate those geniuses rather than putting them down for absolutely no reason… much love no disrespect towards you whatsoever i don’t judge anyone because we all have our own journey we’ve been through in life!!!
But I most definitely agree that would be the best conversation to have ever occurred!!!
Even just a video of them teaching eachother tricks the other doesn’t quite understand.
Andy Anderson ! George Powell ! Collaborating to bring you the world's Cutting Edge technology in skate! Thank you for providing us with information about new products that will help support active living. In my opinion new cutting-edge equipment helps give the rider confidence. thank you to Nigel and crew for providing us with these videos that we may enjoy for the rest of our lives.
It is awesome to see Andy get so excited about a board shape he is in tune with all aspects of skateboarding. What a chill dude with insane amounts of technical knowhow to change the industry one piece at a time.
Andy seems like such a kind fella. Good for him, good for all of us.
Andy just comes across as such a good kindhearted fellow
This board seems like the best of both previous shapes. Very cool!
Believe in yourselves and each other and never give up on your dreams and aspirations and remember to be kind and uplifting to each other and open minded and genuine and respectful and humble.
Andy is revolutionizing skateboarding on a level not seen in years. Thanks for documenting history
His passion for learning drives the inovation in my opinion.
The Heron changed my life! The egg was something I wasn’t ready to benefit from. This board has me excited in ways I’ve never experienced. Thank you Andy for continuing to grow and innovate with a clear mind and earnest enthusiasm!
Did the Heron chip a lot and stuff for you, or not too terrible? I'm ready to buy my second board and excited about Andy's stuff. The eggs are all sold out - wonder if I should wait for this 3rd version, or just pick up a Heron 1.
@@gregmossed the Heron can chip a little but I find it to be negligible. I have been through 3 of them in 2.5 years and I still skate my first one as a banger board and though I did cut it down due to severe razor tail, it has no bad chips in it (still feels poppy too). For me, you can’t go wrong with a Heron 9.13. Even if you decide you want a smaller board you will not regret having a Heron in your quiver;)
@@Legend_of_Rick_G Thanks! As a beginner I'm not doing stair sets or anything so it's not like I'm particularly hard on boards. I think I'll try it out.
I would bet no one before has ever put so much thought into the design of a skateboard. So awesome!!
Andy isn't just a great skater, he's revolutionary.
@@dans2833I don't think you understand
@dans2833 nope I think it was you who didn't understand in the first place
I would love to see this with a minimalist top graphic of all the flick lines of the tricks Andy explained. Put some clear grip tape on it and it'll be sooo nice 👌👌👌👌
Andy's mad scientist brain is reshaping how skaters are going to skate. He takes so many micro adjustments on his boards that will make certain trick easier. His in depth explanation just about how the board shape will make tre flips easier just shows his shapes will impact on other skaters and how they're going to think a ton more about their shapes.
People talk about skating essentially reaching a peak, but this approach to design is where you're going to see skaters doing more with their equipment which in turn will allow them to push more boundaries, which Andy is already on the cutting edge of doing already.
@@dans2833 it's not marketing though. This is Andy implementing his ideas in his own shape. If pros already do such fine tuning in their shapes, you never hear it or see it. If it was in fact all marketing, then EVERY skater would have some weird shape and it would be pushed all over, and it's not.
You just see this with Andy and his board.
Y’all should do a grip tape with color coded arrows showing where to flick for newbies kinda like how they have color coded fret boards for beginner guitar players
On it 🫡
@@authenticandyandersonsweet🤙
@@authenticandyanderson dude please 😭👌
@@dans2833 think you missed the point bro.
the skate community is getting soft. Every pro skater was a newbie at some point and learned flip tricks without this gimmick
“Film at Tony Hawk’s ramp”
Andy better get on the pod with Tony and Jason. Would be tremendous!
The pockets, concave, and structural shape absolutely has a freeride longboard feel to it. There are places to lock in, or easily move your feet to, while allowing you to feel/read every position on the deck at the same time. It's absolutely brilliant, it's going to be epic trying to wring out every bit of this deck's potential! I'm definitely down to shred this deck to find out everything it can do👍‼️
I thought the same thing
Def stoked to hear about this new shape, last 2 shapes are and will always be 🔥🔥
Andy has gotta be the most genuine dude out there. So rad.
This is the most excited i've been to cop an Andy board
I don't even skate and I like listening to Andy talk about skating, he's clearly very thoughtful and deliberate with his approach
I am happy to hear about this innovation. Skateboarding is hard so a deck to make it easier is rad! Thanks George and Andy.
"and the egg cracked, and now we have... the baby Heron" 🐣💜 sounds like Andy's writing fables, but is just explaining the actual design progression
Professor Anderson's Physics of Skateboarding class was a great class. Amazing lectures and the labs were super cool.
This type of innovation was overlooked for years now.
I knew i wasnt crazy, last time i commented on one of your videos. I noticed the shape was different. Can't wait to try it, I'm on my second egg deck.
He is soooo exicted. Thats so cool to see. He is pure passion.
Prediction: another symmetric one but mirroring the opposite corner (or a slight variation thereof) of his original shape. So stoked to hear all about it!
I completely agree with you.
@@SuriSanJose we were pretty close!
@@archimedes131Totally. I see that the deck he's showing here is an 8.1! I haven't skated a board that small in awhile. I hope he makes a bigger size. If not, I'll just give a try.
@@SuriSanJose it's that small at the smallest point but almost 8.4 at the widest (near the bolts...and on both ends no less)....AND it supposedly helps. *shrug* at least worth a try. ...I'm just getting back into skating after a bunch of years...so I can't really test much of it out yet (if ever)...but it makes so much sense in my head.
Please add an User's Manual or quick starting guide or something like that, so people (or at least me) can learn how to use every single area of the deck :-) I've got every other Heron and Egg (my fav) decks, and I can't wait to have this new one.
Great idea ! Thanks ❤
Yesss I love this idea 💜💡 Can't wait!
Thank you Andy. I always like you explaining your new boards. I love that it's a twin and my favourite thing is the sharp kickflip edge where you know where your foot is without looking.
Hey Nka Vids Skateboarding! Dr Andy Anderson skateboard scientist! Ride ride ride!
This design is giving me Christian Hosoi hammerhead mirrorred, and just a touch of snowboard energy. Not sure it will sway me from my Heron Egg love but I'm up for the challenge.
Glad to see the design progress for twin shape skateboards. I think of some analogs to professional snowsports instruction, if you learn from "one of the good ones" there is no goofy/regular and the equipment supports you to absorb what is already a pretty daunting task of sliding around 🙂 Andy's description of making equipment that is predictable is spot-on!
Sick can’t wait to get one. So rad Andy is like that to people he meets.
Totally!, Right on, Gotchu, and Sick! I agree with all of that too.
FINALLY AN 8.5. yes please!!! 15" wheelbase would be amazing on an 8.5. Powell used to do it and stopped..... i wish Andy kept the 15" wb on this one.
10:09
most genuine "Thank you man." ive ever witnessed.
I just got the symmetrical one a couple weeks ago and it's my favorite skateboard I've had. Looking forward to getting the Nano Cubics as well when they release bigger sizes.
Oooh I didn’t know they were out at 20:24 all
Try the Modes skateboarding wheels, 55mm and 95A (the dragon formula from Andy anderson last year was 93A), bigger, very similar and better than 97A, small difference, big fun.. 64mm 95A for the mini cubic, good choice too
@@happyskating2000 the board he's talking about in this video has not been released as of yet
Yea fr want the nano in 54 or 55 can settle for 56
oh dude ... I really hope that he doesn't kill the egg board ... I really like the egg board
He won’t. 🤓
Me too, i do wish they made the heron egg in a 8.5 at middle as well. I would really love it if was a tad smaller.
@@viracocha03yeah, it is powell parelta and they have only one symmetrical board. and this symmetrical is 8.7. they should make smaller. just make 8, 8.25, 8.5. man, c'mon.
@@mehmetfratozgun6858 I thought it was 9.5 in the middle, my bad. But either way, as much as I live the shape its a bit wider then I would prefer. I'm still riding it currently tho.
This board is 8.5 at the widest, 8.2 in the middle :) skates like something in between 😊 symmetrical like the egg, with all the features from my first board !
I really like seeing how Andy breaks down the mechanics of skating when he designs stuff. We are all pretty lucky that he's been able to partner up with Powell Peralta / George who are up to the challenge of pushing the state of the art forward.
Andy, my first board back will be this new one. As soon as I saw it I need it.. I havnt actually skated hard in many yrs. When I do skate it's just to get to A-B. But this board makes me wanna go hard and relearn. This board makes more sense and looks like it'll also be great for rails the way the nose/tail is. I really like this shape.. Andy not gaslighting you but you contributed so much to the community with your ideals..
I love how Andy is constantly innovating his set-up.
i love that &y explains everything in such small details so everyone understands where he is coming from with that shape. this helps new skaters out so much to progress. does not shock me that his other board was the best selling deck. more ppl need to see this!
him explaining the shape makes this board sound amazing cant wait to skate one
Cannot WAIT for this shape to release!!!🙌🏼
Andy… you’re an inspiration, man! You put intelligence in skating. Those things go together well: Inspiration and Intelligence. Bam!!!
Thanks for the fun video, guys!
Excellent review of Andy's new board. I'm a 57-year-old non-skater that enjoys the content. The information here about how to use the board features is incredible. Consider doing a series on this stuff, and I would bet you get a million views... Thanks for the content.
I'm on my 3rd Heron flite deck now- Biggest gripe is price....$300 for deck, $40 Rails, $15 Grip, that $350NZD for a consumable....on top of just sourcing one which is a journey in itself. The Egg was not me at all- But this look more up my ally.
This is so educatable. I would apreciate more like this video!
I love Andy bruh. He's just skating and trying to figure out how to make skateboarding better for everyone. Gotta love it.
I love how truly passionate Andy allwaes is when talking bout his shapes love seeing some one put that much thaught in to anything that is going to have his name on it
I can see it now. You might've explained it better this time.
I would definitely ride one of these.
Nice to see the thought and purpose behind the shape.
Reminiscent of some of the ideation behind the Thing decks by Schmitt sticks. As for tricks all this realizations come from experience and breaking it down. So glad Andy has the resources to be able to realize these ideas and experiment as well as the platform to explain, expose and sell these concepts to more of the mass, who these days are more open to these concepts. Timing is everything. Just waiting to see if he tackles the concept of the 1 bearing wheel.
Incredible how Andy makes you wann tr every single product he presents.
I watch this like 4 times a day I'm so excited
Looks like a very cool and functional board shape.
Thanks for sharing the science and ideas behind it all.
Scenery looks stunning, wish I could travel to America!
Can’t wait until this shape comes out. I’ve been waiting for something closer to an 8.25!
Congrats Andy. You deserve all the sucess in the world. You represent what skating is truly about.
I’ll say it again…TAKE MY MONEY!!! 🤑💵
I don't even skate and I just watched a 22:44 video of Andy explaining the shapes of his board😅. His enthusiasm makes everything he does so fun to watch.
Different Board shapes are coming back. That's awesome! I just built me a 10x30 cheap moose deck with Indy 159s and OJ 95a team riders 😎👍🔥
New wheels, new board shape, and his new Etnies shoes drop soon. Is && gonna drop that video part?!?!?
The best part is the huge price!!! Yes sir nit’mmmm
Watching Andy talk about his board reminds me of how I talk about my pc peripherals, I love the enthusiasm
Much love and respect to you and your channel Nigel. I hope that all is well for you and your family and friends and I hope that all of your dreams and aspirations come true and that you are safe during your travels and adventures and skateboarding and while recording your videos and going live on RUclips.
This is along the lines of an interview with Rodney Mullen. Intellectually insane. This is the most interesting interview with so much insight. What a master mind and master class. So cool.... cheers....
Im hyped for this one andy always does a good job with his shapes this one seems like alot of fun
Sell me that experimental graphic 🤣🤣 Id love having no graphic too, on my wall forever
Bro your videos are the best. I look forward to your videos more than most tv show premieres 😂👊
Dude I'm all about this board, just watched this much later unboxing and skating at Braille and I hope this catches on. What intention dude I thought maybe it was a beginner board at first but just like the current board it was just designed to do things better, JUST like this. I'm sold dude
Your a genius Andy Anderson.
I love how it has devoured so many modern cruiser adaptations while marrying them and bending them to be what they need to be for a great all rounder trick deck.
my 360 flip video shows and explains some of this with a grid and that was a year ago. Thats a beautiful board
Andy should get into making boards he's so passionate about the details
what do you mean he literally is making boards... thats the whole point of the video
@@morrisalanisette9067 I mean literally!
No! he designs the board tells the maker what he want but he doesn't physically make the boards the factory does he designs it
I hope Powell is ready to sell lots of these
I like the dual square tail. Keen to try this shape I skipped the twintail still riding the original shape.
great video, much love to andy and the team. the video provides so much knowledge for all range of skaters.
I can’t wait for the new board I’ve had all of his boards and they all are amazing and they just have gotten better and better!
Does this mark a new era ?! New shape, new skate 🛹
Thank you for the content @Nka Vids Skateboarding
I am so glad to see more products from Andy. He doesn't have enough already. In fact, I don't buy Powell products for a year, just because they seem to have a new wheel or deck every month!!!
Good to see Andy's board in this size. Recently I switched from 8 to 8.125. Now I feel it's small. So 8.3-8.4 would be OK i think.
Andy is the skating savant. He's living this at a different level than us mere mortals.
Andy out here making popsicle shapes look old fashioned
i felt like i was watching a scene in pineapple express where james franco explains his creation to seth.
but in all seriousness, im glad andy is this passionate about things, legitimately shows and we need more passionate people in this world.
When is Andy going to talk about his new truck shape.
I have a feeling those are gonna be really expensive.
Shoutout to Andy for making helmets look coolie 😎
Andy single-handedly bringing Swatch back to the states....
Tiny adjustments cause evolution and thats beautiful
Came for a rad new shape and received a college course on what your feet do during tricks. Wish there was a mailing list or something for when this drops, I don't wanna miss it!
Thanks for inviting us into this sneak peak! So looking forward to riding this!!! Can you post the full deck specs?
Can't wait for it, just wish flight decks were a little more affordable when compared to vx
Ive been saying this man ive been say this you need the dorje for the graphic it looks just like it man im like crying im so so so happy
This shape is the truth
gonna start saving my money now.
I'm super excited to get the board and the new wheels! It'd be cool to maybe have griptape to show to flick and pressure spots like they do on some baseballs to show how to throw certain pitches. That'd be perfect for my ADD ass
Mine too, that is a sick idea.
This is a very good idea. Something tells me it will happen soon
Love it!!
Anderson 3.0! Interseting to see those nerd boards coming out. Powell will have to sell this board with an instruction sheet written by Andy now. 😂😂
I have seen many shaped boards since I started skating in 1986. I remember seeing a aDanny Way DW board and it was 9 inch wide and that was too skinny, then I rode it and eventually owned that deck. Modern skaters think boards are too wide if they are over 8.5.
Got me thinking instantly Hosoi's Hammerhead board nose, but this is still different.
This is literally next-gen skateboard.
No body is more excited for this then me I sware to you need to see dude omg this is unreal dude I want to send you mine😅