It is possible to install the tubes in an upward direction, but it's difficult to maintain the aesthetics. Therefore, I decided to position the tubes at the bottom, although I don't like this setup. I think there's a reason why most RUclipsrs build this case in a similar way.
Guys, the AIO orientation here is perfectly fine. It's in the second best position it can be, with a top mounted radiator being the best position. Here, any air in the system gets trapped at the top of the rad... you will lose some heat dissipation efficiency, but this won't affect the pump because the liquid doesn't have to content with the trapped air. Reversing the tube orientation and putting them at the top of the rad will create the potential of trapping air where the tube enters the rad. It won't kill the pump, but it does have to work a little bit harder as a result of having to push the liquid through a smaller opening created as a result of the trapped air, and thus potentially lower the lifespan of your pump. Edit: And if you don't believe me, both Gamer's Nexus and JayzTwoCents have spoken about this very topic at length.
I like the comment of the GPU test: tested in horizontal position :) because in the final position, graphic cards don't like the vertical mode and it decrease a lot the cooling possibilities. I needed to use a waterblock to not be throttling
I think if you get the thermalright am5 plate for the cpu, you'll probably get some better cooler spread on that cpu. Seems alittle high than what it's suppose to be on those loads.
Intake is more effective than exhaust for CPU cooling. While it may increase the internal temperature of the PC case, this can be compensated by using bottom-mounted fans.
Shouldn't the AIO tubes be on top?
It is possible to install the tubes in an upward direction, but it's difficult to maintain the aesthetics.
Therefore, I decided to position the tubes at the bottom, although I don't like this setup.
I think there's a reason why most RUclipsrs build this case in a similar way.
It's a sealed pump so it doesn't matter.
As long as the radiator is higher than the pump it's a non issue.
Guys, the AIO orientation here is perfectly fine. It's in the second best position it can be, with a top mounted radiator being the best position. Here, any air in the system gets trapped at the top of the rad... you will lose some heat dissipation efficiency, but this won't affect the pump because the liquid doesn't have to content with the trapped air. Reversing the tube orientation and putting them at the top of the rad will create the potential of trapping air where the tube enters the rad. It won't kill the pump, but it does have to work a little bit harder as a result of having to push the liquid through a smaller opening created as a result of the trapped air, and thus potentially lower the lifespan of your pump.
Edit: And if you don't believe me, both Gamer's Nexus and JayzTwoCents have spoken about this very topic at length.
Thank you so much for the information and summary.👍👍
I'm so jealous of the 9800x3d. The clean build is top-notch!
Oh, thank you so much!
I like the comment of the GPU test: tested in horizontal position :) because in the final position, graphic cards don't like the vertical mode and it decrease a lot the cooling possibilities. I needed to use a waterblock to not be throttling
Hey what cpu gpu combo is best for Fortnite right now medium/high end 240+ fps constant
Bit weird to have the AIO in that configuration, doesnt gravity effect the water being pumped
It does this AIO that is installed the wrong way
The build looks really clean. Well done bro!
Oh, thank you so much!
I really appreciate your support👍
I think if you get the thermalright am5 plate for the cpu, you'll probably get some better cooler spread on that cpu. Seems alittle high than what it's suppose to be on those loads.
Thanks man!
07:05 If the 9800X3D stays under 80°C in Cinebench R23 without undervolting, it's an excellent result.
bro, I had to like, you did what I was going to do if I got this case. nice
Cheers mate!!
Nice build 👍
Weird orientation but still gorgeous.
What the sense to suck hot air from radiator, inside the case?
Intake is more effective than exhaust for CPU cooling. While it may increase the internal temperature of the PC case, this can be compensated by using bottom-mounted fans.
영상 분위기 좋습다 리안리 팬하고 라데온 레퍼글카 led하고 잘어울리네요 ㅎㅎ 잘봤어여❤
의도된 것은 아니지만 LED 느낌이 비슷한 것 같네요!
감사합니다 성철님!
Nice but i can never do 2 sticks of ram.
How net worth are you? :O
👀
gamer nexus does not approve the aio set-up
크아아악 그래픽 카드를 위로 달면 냉매가 밑에 고인다던디...!
하지만 영상은 잘보았습니다 좋아요도 물론 눌러놨어요
오호 감사합니다!
Second
👍👍
Airflow is terrible, AIO installed wrong 🤡
it's good when they send everything for free, you can do all sorts of crap)