Hello brother. I want to upgrade my 650 with alloy wheels and tubeless tires. Now OE alloys can be ordered from the spares (15k pair). I'm in confusion about whether I should buy the Meteor rear wheel as it has plenty of tire options as it got 17". The Triumph 900 has a similar setup with 18" front and 17" at the rear. What's your view on it? As you are riding with meteor wheels. How does it perform at high speeds and handles the speed breakers?
Yes now we have 18s alloy from OEM... and you are right 17 gets lot of option in reasonable price... I haven't faced any issue with 17 at rear ... even I am just getting front from the company... For other question I have long term review ... and answered all your questions. Thanks for watching don't forget subs for more content on motorcycle
The biggest reason people go with rear first. 1. 18 inch rim is narrow, so I can't have wider tyre 2. 18inch does have very good tyre option 3. Rear is more prone to puncture Not going with front is 1. Very rare chance of getting puncture in front 2. Now vredstien have good tyre for front in budget 3. If you go with 17 in front there will be massive speedo error
Shall be waiting for a direct fit for front wheel of interceptor other than the current alloy which r offered. Find then kinda ugly. Meteor rear one with diamond cut is still a great option for the rear.
Hey man...!!! Firstly great content but.... Will the seat height decrease if we install rear wheel alloy of meteor to this machine if yes HOW MUCH WILL IT IN inches and What if we install both front and back alloy of meteor to this bike will the seat height decrease further IF POSSIBLE TELL IT IN THE NEXT VIDEO BRO ATLEAST PUT A CLIP OF THE DIFFERENCE IN SEAT HEIGHT BEFORE AND AFTER.
Thanks for liking the video... Yes seat height does decreases but very very minute... hardly 10mm.. it's not very noticeable... I will try to upload a short in comparison of stock and my Interceptor for seat height.. Do subscribe for more video
Thanks for the info buddy my height is 5'5 and i still can reach out my feet onto the ground but i had a doubt that can I be able to reach out my legs further more if i install the alloys More over tell a few tips to decrease the seat height of the bike for a bit short riders
You can buy them from any RE service centre... Just place order for meteor Rear alloy rim .. Remember there are two types of alloy of meteor full black(6000inr) and diamond cut(6500inr) just make sure which one you are ordering. Check my installation video .. I have more insight there about alloy and its whereabouts. Hope you like the video and do subscribe the channel and check other videos too...
I'm planning to buy an Interceptor Black Ray alloy model but I'm also confused whether I should put the meteor alloy and make it 17" and get a wider tyre or leave it as it is 18"
If u already have stock alloy ..that don't go with 17... u already have alloy ..u can do one thing upgrade to vredestein tyres which comes on GT...they are way superior then ceat on interceptor.
First of all thank you for watching the video and hope you liked the video. It all depends what you want from bike 🏍... after going with the alloy I got better options in tyre ,stability,great cornering control and thick look from rear... only trade off is fuel efficiency... I noticed drop 2-3kmpl and that's the only draw back.. if u like mentioned benefits then it's a no brainer.
Biggest concern is that fitting the interceptor disc on alloys ..as 650 disc are floating type design.. and on alloys they are fitted directly..plus meteor front is 19 so I won't suggest it. 🙂
Long experience is still the same.... now it has done 14000km no isse what so ever... and just last month, did Muktinath nepal trip with pillion and luggage... no issue ... it's now tested experiment fully successful
Hope you liked the video .. Do subscribe and share this video.. To get rear meteor alloy wheel ..just contact service department of RE ..they will order it for you.
Thanks for watching the video and hope you liked the video... Since I am.new to the youtube channel I am still learning ... and surely from next time I will do same
@@Velocitysingh ya but its not available in my city and second thing he asking 23500 to arrange the tyre which i think is quite high. and i dont go for long drive and do tour on my bike so i think its better deal for me
Yes... jis din unhone rate bataya tha... uske 2 din baad tak I was in shock 😲 Hope you liked the video and Please like Share Subscribe for more content 😊
Thanks for watching the video, and hope you liked the video. We did think of it... but two reasons for not opting are 1. Price😅 2. Did have a word with few users, and reviews weren't good.
ADVANTAGES are soooo good that you wouldn't care about the mileage drops anymore
are bhaiya bhaiya bhaiya ❤...
well explained video..👌🏼
🥰
Hello brother. I want to upgrade my 650 with alloy wheels and tubeless tires. Now OE alloys can be ordered from the spares (15k pair). I'm in confusion about whether I should buy the Meteor rear wheel as it has plenty of tire options as it got 17". The Triumph 900 has a similar setup with 18" front and 17" at the rear. What's your view on it? As you are riding with meteor wheels. How does it perform at high speeds and handles the speed breakers?
Yes now we have 18s alloy from OEM... and you are right 17 gets lot of option in reasonable price... I haven't faced any issue with 17 at rear ... even I am just getting front from the company...
For other question I have long term review ... and answered all your questions.
Thanks for watching don't forget subs for more content on motorcycle
I installed stock rim in my interceptor bike running more smoothly compared to spoke rim reduction of weight also I noticed
Yes alloys are more stable and smooth compared to Spoke rims
Awesome review, most importantly whole vlog is driving the same bike. Keep sharing such throttle videos
Big fan sir
Lots of love from Noida
Aapki vajah se bikes ke bare me kafi jankari mili
🤣🤣🤣😅
@@Velocitysingh 😆😂😆
Very informative video for alloy wheel
Ek no. Kia alloy laga k. 👍🎉🎉
What is current mileage u are getting?
I ride bit aggressive.. so I get like 23-25kmpl
I wonder why very few consider changing the front wheel and tyre.
The biggest reason people go with rear first.
1. 18 inch rim is narrow, so I can't have wider tyre
2. 18inch does have very good tyre option
3. Rear is more prone to puncture
Not going with front is
1. Very rare chance of getting puncture in front
2. Now vredstien have good tyre for front in budget
3. If you go with 17 in front there will be massive speedo error
Shall be waiting for a direct fit for front wheel of interceptor other than the current alloy which r offered. Find then kinda ugly. Meteor rear one with diamond cut is still a great option for the rear.
I am still using spokes in front with vredstien no problem yet so far
@@Velocitysingh only the look to make it more symmetrical approach. Both spoke wheels or both alloys. this is something in the middle. Isnt it?
You can check my motorcycle on my insta
Hey man...!!!
Firstly great content but....
Will the seat height decrease if we install rear wheel alloy of meteor to this machine if yes HOW MUCH WILL IT IN inches
and
What if we install both front and back alloy of meteor to this bike will the seat height decrease further
IF POSSIBLE TELL IT IN THE NEXT VIDEO BRO ATLEAST PUT A CLIP OF THE DIFFERENCE IN SEAT HEIGHT BEFORE AND AFTER.
Thanks for liking the video...
Yes seat height does decreases but very very minute... hardly 10mm.. it's not very noticeable...
I will try to upload a short in comparison of stock and my Interceptor for seat height..
Do subscribe for more video
Thanks for the info buddy my height is 5'5 and i still can reach out my feet onto the ground but i had a doubt that can I be able to reach out my legs further more if i install the alloys
More over tell a few tips to decrease the seat height of the bike for a bit short riders
After installing alloy your seat height will decrease... it won't increase for sure
Good job Vikram... 🎉
Thank you sir 😊
handle bar konsi h?
Himalayan ka Silver Handel Bar... RE service centre se 600rs ka mil jaega... lekin isme stock 650 ka bar end weight nahi lag paega.
@@Velocitysingh okay bhai thanks
Bro where do i get single back alloy rim of meteor 350. Please reply
You can buy them from any RE service centre...
Just place order for meteor Rear alloy rim ..
Remember there are two types of alloy of meteor full black(6000inr) and diamond cut(6500inr) just make sure which one you are ordering.
Check my installation video .. I have more insight there about alloy and its whereabouts.
Hope you like the video and do subscribe the channel and check other videos too...
I'm planning to buy an Interceptor Black Ray alloy model but I'm also confused whether I should put the meteor alloy and make it 17" and get a wider tyre or leave it as it is 18"
If u already have stock alloy ..that don't go with 17... u already have alloy ..u can do one thing upgrade to vredestein tyres which comes on GT...they are way superior then ceat on interceptor.
@@Velocitysingh but I asked in showroom they said mushkil hai tell me kya karu
To which statement they said that??
@@Velocitysingh they said bas woh GT mein hi aarhe hai
Ohh Haan wo khareedna padega .... agar brand new m hi change karoge toh ho sakta h aapko aapke tyre ka acha value mil jayega
Sir actually now i have opportunity to change my back wheel to alloy or same old rim what would you suggest me to go for
First of all thank you for watching the video and hope you liked the video.
It all depends what you want from bike 🏍... after going with the alloy I got better options in tyre ,stability,great cornering control and thick look from rear... only trade off is fuel efficiency... I noticed drop 2-3kmpl and that's the only draw back.. if u like mentioned benefits then it's a no brainer.
Bro can we use Meteor 350 alloy wheel for GT 650 ??
Yes absolutely... basically GT and interceptor are same bike with 2-3 differences. My couple of riding buddies do use same setup on their GTs
@@Velocitysingh thank you
@@Velocitysingh Any impact on bike height after wheel change ??
Slight drop... expect 10mm drop.... to make it less increase the preload on rear shocks
Hi sir... Can't v modify front wheel too?can't v swap it with thr same meteor 350 front wheel?
I had same thing on my mind... I have made a dedicated video on it ... please do check it 🙏 😊
Biggest concern is that fitting the interceptor disc on alloys ..as 650 disc are floating type design.. and on alloys they are fitted directly..plus meteor front is 19 so I won't suggest it. 🙂
Bro... Please make a long term experience video
Long experience is still the same.... now it has done 14000km no isse what so ever... and just last month, did Muktinath nepal trip with pillion and luggage... no issue ... it's now tested experiment fully successful
What is the procedure to purchase metor rear alloy?
Hope you liked the video .. Do subscribe and share this video..
To get rear meteor alloy wheel ..just contact service department of RE ..they will order it for you.
Helpful
👍👍👍👍
Please include sub title info added in your videos, which will be helpful for larger audience
Thanks for watching the video and hope you liked the video...
Since I am.new to the youtube channel I am still learning ... and surely from next time I will do same
Can you share from where you got bar end mirrors for your interceptor
Hope you liked the video and do subscribe for more...
Got these mirror from Billa Bling
I installed mrf zapper y as per stock size
You should have gone vredstien they are superior tyre
@@Velocitysingh ya but its not available in my city and second thing he asking 23500 to arrange the tyre which i think is quite high. and i dont go for long drive and do tour on my bike so i think its better deal for me
You should connect with Torque Block
@@Velocitysingh what is this sir
ok its online company
Mirror or mirror cover nut kaha se lia?
Black ones?
@@Velocitysingh chrome
Wo chrome bar end mirror h... search Billa Bling on insta
Bhai apka camera bohot shake karti hai.. please change
Will do.. for sure
Vai there is a company who make spoke tubeless rims but in Intercepter one side rim ll cost 30k each 🤔😅
Yes... jis din unhone rate bataya tha... uske 2 din baad tak I was in shock 😲
Hope you liked the video and Please like Share Subscribe for more content 😊
@@Velocitysingh which company
@@limitless697 Dismotec
Aap Dismotech bare mein baat kar rahe hein kya
@@Velocitysingh ap sirf front ka dismotech dal lo .... Bht log front dismotech aur rear pe meteor ka use kar rahe
Bro can you please share me bar end mirror link?
I bought it through insta page... Billa Bling
Bro use dismotech 17” with apollo alpha h1 for front
Thanks for watching the video, and hope you liked the video.
We did think of it... but two reasons for not opting are
1. Price😅
2. Did have a word with few users, and reviews weren't good.
How about its performance while riding with pillion..
Nothing feels different... it's same ... I just take precautions while going over huge speed bumps... but it has never scrapped
@@Velocitysingh thanks buddy.. I m about to do this mod on my inty..
Biggest positive will be feedback,stability and no more punctures...
@MOTOBRO VRS a week back my 2 hours just wasted just coz of flat tyre.. n i was stranded on road with my wife
Same happened to me
Use W2S suspension riser mate
Dharti hil ja rhi thi bhaiya 🤣
Earth shattering Torque
Mount everage type k speed breakers🤣🤣🤣
True story