TSP First Strike T15 Slim Dropdown ASA + Install

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 42

  • @NightmarePB
    @NightmarePB 4 года назад +9

    Drop down is a must!

  • @OptimusBarrettPrime
    @OptimusBarrettPrime 4 года назад +3

    Drop down ASA's are the way of life. Its like asking if you want milk with your cereal in the morning haha

  • @krek.44
    @krek.44 Год назад

    I have one on my T15 and it's worth the price. Constantly getting questions and compliments on it.

  • @magfedheroes55
    @magfedheroes55 4 года назад +1

    I'm still debating whether get this one or the FS one. I like the fact that the FS one the QD hole is not on the side of the ASA.

    • @tooootall
      @tooootall 4 года назад +1

      Imo the FS one is better. Even with the sling plate there was a slight gap in the TSP one. I also use a guide bar attached to my marker tho.

  • @veil1792
    @veil1792 4 года назад

    *TSP offers 5 different sling plate options for their drop-ASA*
    *This drop-ASA is a must have item for all T15 owners!*

  • @nicholasbrown4265
    @nicholasbrown4265 4 года назад +1

    So only the new t15s come without a guide bar?

  • @Isaac_L..
    @Isaac_L.. 4 года назад

    I just run my mg100 with a 68ci like a speedball gun. I don’t mind the feel, and then switching back and fourth between my magfed and more traditional paintball guns is a breeze. The scope problem is nonexistent for me.

  • @SudsyG
    @SudsyG 4 года назад +3

    I absolutely love how my local, seemingly insignificant paintball field/shop has a pretty damn large following on youtube... Now I only buy from defcon, no more badlands!
    P.S. How soon is that T15 i just ordered going to be shipped? ;)

    • @defconpaintball
      @defconpaintball  4 года назад

      Shipped yesterday. Contact us at support@defconpaintball.com if you have further questions.

    • @SudsyG
      @SudsyG 4 года назад

      Defcon Paintball Gear Thanks! It arrived at my door this morning!

  • @Vabene90
    @Vabene90 4 года назад +1

    U can use the original Sling Plate with the TSP Asa ! U dont need the TSP Plate for that. And u can use the original Screws too, the TSP Screws are metric for EU :-)

    • @tooootall
      @tooootall 4 года назад

      Tried that, the original plate doesn't fit at all.

    • @Vabene90
      @Vabene90 4 года назад

      @@tooootall please show a picture. We tested all gen2-gen4 Plates.

    • @tooootall
      @tooootall 4 года назад

      @@Vabene90 will do, I'll try to get a pic tomorrow. I'm not entirely sure which gen my t15 is.

    • @defconpaintball
      @defconpaintball  4 года назад +1

      @@Vabene90 bit.ly/2Xh3xxo here is a picture of the gap that remains. This particular customer had to heavily modify theirs to fit flush.
      bit.ly/2Xh3xxo

    • @wendatwilly
      @wendatwilly 4 года назад +1

      i purchased the TSP dropdown from Defcon with the intention of running it with the stock sling plate.
      it does NOT fill the gap, it leaves possibly 1MM of space maybe more in between the stock sling plate and the TSP.
      so now my understanding is that i will be required to purchase the aftermarket sling plate in order to fill this gap?
      Also, im alittle considered snout the safety of this product, only two small screws(smaller then the stock asa screws) are all that is holding this asa into place on the marker with upwards of 1000-1100psi of output pressure running through the marker.

  • @darlenezuniga9920
    @darlenezuniga9920 4 года назад

    I realized that you can use an empty pringles can for a paint ball pod

  • @josechavez-pi4nv
    @josechavez-pi4nv 3 года назад

    Where could I purchase an O-Ring replacement for this kit??? Anyone?

  • @dylanmumaw2845
    @dylanmumaw2845 4 года назад

    Can u buy it with the drop down already installed

  • @TheNaturemage
    @TheNaturemage 4 года назад

    Can you use the plate that was already on the T15 to fill the gap?

    • @hdhfdhddhdk
      @hdhfdhddhdk 4 года назад +1

      Yes

    • @gmanTim
      @gmanTim 4 года назад

      I have heard people were using the stock plate that comes with the t15 and still having a small gap, but I have a Gen1 t15 and used the stock plate with no problems.

    • @tooootall
      @tooootall 4 года назад

      Nope, didn't fit.

    • @advancedmagfedchannel6577
      @advancedmagfedchannel6577 4 года назад

      @@tooootall Manufacturer states that the original fits.... Other players state that aswell. Maybe you got a different product, but your information is generally incorrect.

    • @tooootall
      @tooootall 4 года назад

      @@advancedmagfedchannel6577 I wish I was the only one I knew that couldn't get it to fit. But unfortunately other customers have had the same problem. We have a picture of it, I'll get a link to it posted in the comments today.

  • @TEAMGHOSTCOMPANY
    @TEAMGHOSTCOMPANY 4 года назад

    Mine leaks from that spot and I cannot find what the cause is.

    • @johnalvarez9725
      @johnalvarez9725 Год назад

      Did u ever find the cause cuz I’m having this problem

  • @samuelgalipeau1511
    @samuelgalipeau1511 3 года назад

    Does it fit on t15 first generation?

  • @WB-77
    @WB-77 4 года назад

    Can you install it on the T15 Scout as well?

    • @tooootall
      @tooootall 4 года назад

      No unfortunately.

  • @ProjectAnubisUSA
    @ProjectAnubisUSA 3 года назад

    They could’ve designed it better like 45 deg the top instead of a milled radius and 45 deg the qd hole locations... for the price include the plate or make 2 options... I’ll be 3d printing a spacer or laser cutting my own sling mount. I won’t pay for this extra junk! The ads looks like it’s made from 2 pieces with the poor sanding job they did for the tank mount part...