First Strike T15 V2 Mag Fix

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 56

  • @spiontontom
    @spiontontom 4 года назад +6

    I would really enjoy seeing a full install and tuning of the full auto mod.

  • @JLMtime
    @JLMtime 4 года назад +8

    I love to know small fixes like these spread the word... I just found similar fix for my axe 2.0/mini GS if you use fatter smaller o-rings on engine you get tighter better velocity also if your reg sticks just screw it tight then lose tight then lose. Also if you get A-5 stock wiggle you can use o-ring on back to fix that AND if you get hand guard wiggle on X7 just use larger torx screws instead of small allen stock screws !

  • @coltonjobst3122
    @coltonjobst3122 4 года назад +6

    Holy smokes! Literally the problem my buddy Sam and I had on Sunday. Thank you so much!

    • @tooootall
      @tooootall 4 года назад +1

      Happy to help. This affected a bunch of us when we last played and it was a real downer. Once we had it figured out I knew I had to get a vid out asap cuz we are DEF not the only people who have this issue.

    • @samatsevens
      @samatsevens 4 года назад +1

      Yep yep. Gonna go over my mags now

    • @tacticalteddy5556
      @tacticalteddy5556 4 года назад +1

      This is why i got rid if my t15pdw. I had nothing but air leaks right out of the box. Why should you have to "fix" their product. For the price fs markers should work.

  • @LouisContentSA
    @LouisContentSA Год назад

    Thank you very much for the tip. I used your suggestion on both of my T15 magazines and the difference it absolutely night and day. This saved me allot of money especially after the exuberant cost of the marker itself. Could you please make a video about all the types of upgrades that one can make on the T15 please.

  • @austenhenry-biskup838
    @austenhenry-biskup838 4 года назад +1

    Had a similar problem with my V1 mags causing a few flips/chops or just not feeding. I recently shaved a small bevel on the underside of the tab holding the first strikes back because it wasn’t sliding back as far as it needed to when in the magwell. This made it harder for the first strikes to get caught on the edge. It has worked so far but I can’t say that it works forever, I need to test it a lot more. It is important though that you don’t create too large of a bevel or shorten the tab at all, otherwise you may run the risk of the tab not holding anything in.

  • @leviluikart977
    @leviluikart977 4 года назад +1

    Awesome I just noticed my 20rd does it and not my 10rders originally though it was my barrel adapter not having a little ramp like the stock barrel thank you guys

  • @Alabasterslim
    @Alabasterslim 4 года назад +6

    I had the big sad. But now I don’t. Thanks Rancid!

  • @coreyhohlbein7963
    @coreyhohlbein7963 2 года назад

    Thank you dude! I played living legends today and was getting sooo frustrated with this issue. I'm going back tomorrow and cannot wait to see if this works! I appreciate you my guy!

  • @lakotacook8687
    @lakotacook8687 2 года назад

    I use a less lethal build but I prefer the shaped projectiles. I've had problems with flips in my m17 to the point of jamming and minor damage to the bolt. This is with both less lethal ammo and standard fsr paint rounds or just rubber tips. I do use t15 mags tho. I've found the problem lies within the mag. Like maybe the channel the rounds feed from needs modified slightly to be tighter or maybe it needs to be sort of d shaped? This is something that definitely needs worked on and improved. If you can find the best solutions it would help alot of people.

  • @aunttifa6794
    @aunttifa6794 3 года назад

    Yes but when does 2nd Strike come out?

  • @cgmf-d6t
    @cgmf-d6t 3 года назад

    I have a feeling this made me chop badly at my last game before the pandemic fucked everything up. I was using round balls too. I am sure that this was causing it. Thank you for your excellent videos and your great customer service. I hope to see you at the store sometime.

  • @kylemuise8829
    @kylemuise8829 4 года назад +1

    My t15 detents are flattening like every 5 mags causing double feeds and chops. Brand new detents, marker is cocked the whole time and I don't leave the bolt in when storing it. Me and a friend looking for a Mod.

    • @tooootall
      @tooootall 4 года назад

      That sounds really weird, considering you don't keep the bolt in it when stored. My detents have lasted me like a year. Is it possible you have some of the really old detents from a few years back? Those ones were made of much softer rubber than the current one.

    • @kylemuise8829
      @kylemuise8829 4 года назад +1

      @@tooootall i know, its dicking with my brain. But unless the new ones have been sitting on the shelf for a while before I bought them, I doubt it. Also I don't shoot full auto so this is just strange to me.
      But I shortened the tips off a troublesome set of detents to see if that works.

    • @tooootall
      @tooootall 4 года назад

      @@kylemuise8829 I mean, it is possible that if a store bought a whole ton of detents a few years ago they could still have some around.

    • @clevelandjackson1826
      @clevelandjackson1826 4 года назад

      I have the same problem with my DMR!!! i bought it months ago and haven't been able to take it out been having problems with it since purchase.

    • @kylemuise8829
      @kylemuise8829 4 года назад

      @@tooootall also running A5 thread adapter for 14" nemesis barrel. Don't know if that makes any ideas pop up but yeah.

  • @BConText
    @BConText 4 года назад +1

    Awesome , was frustrating !! appreciated !! Happy New Year MAng !!

  • @bluestone4069
    @bluestone4069 4 года назад +1

    Thanks for your videos. Is it possible that the Tippman has more power than the T15? I have both and I feel it. And can it be that the normal markers have even more power than the magfeed versions?

    • @TheSatanicon
      @TheSatanicon 4 года назад +3

      Uuuuhm, are you familiar with chrono and velocity? Every field has a limit between 280-300 feet per second (velocity), 280 on a tippmann is the same as 280 on a T15, the spring power on the bolt and weight on the bolt itself might make it "feel" more powerful but you don't have to be a scientist to understand the concept of speed and mass. A paintball flying at 280 fps is equally "powerful" regardless what sort of marker shot it.

    • @bluestone4069
      @bluestone4069 4 года назад

      @@TheSatanicon Thx :)

  • @Icarusabove
    @Icarusabove 4 года назад

    I don’t have a t15 or the V2 mags but I do like these videos. Might go magfed next season. Undecided

  • @Rudolf_the_paintballer
    @Rudolf_the_paintballer 4 года назад

    That full auto is so awesome I wish I would have something like that on my sar12

  • @eddieholt4935
    @eddieholt4935 3 года назад

    Thank you so much, this helped me a bunch.

  • @MrBrewman95
    @MrBrewman95 4 года назад +1

    This is why I still have the V1 mags.

    • @tooootall
      @tooootall 4 года назад

      V1 mags are still great, they just don't handle the full auto as well.

  • @haywan4k640
    @haywan4k640 4 года назад

    Where do I find the full auto kit for t15 I can’t find no whereeee

  • @logmo7959
    @logmo7959 3 года назад

    hi i have a first strike scout and not only are all my balls rolling right out of my barrel and when i pull my mag out there is typically multiple rounds sitting in my mag well and ive just had one break in my mag well. this was my first mag with this marker on time of paint now being deep in my trigger system when i cleaned most of it out to try again i shot and my gun fired 7 rounds at once wtf is going on

  • @greenbeastpb3677
    @greenbeastpb3677 4 года назад

    Question here. Shooting a T15 What would you recommend sitting your out put pressure on on your hpa tank

    • @VICERancid
      @VICERancid 4 года назад +1

      850

    • @greenbeastpb3677
      @greenbeastpb3677 4 года назад +1

      @@VICERancid thank you!

    • @tooootall
      @tooootall 4 года назад

      @@greenbeastpb3677 if it's higher than that, that's ok too, 850-950 seems to be the ideal range.

    • @greenbeastpb3677
      @greenbeastpb3677 4 года назад

      @@tooootall OK thanks buddy

  • @VICERancid
    @VICERancid 4 года назад +2

    Glad I could help

  • @callsign_hazard1941
    @callsign_hazard1941 3 года назад

    Thats what’s happening to me, thanks buddy much appreciated

  • @macher478
    @macher478 3 года назад +1

    i had chops with roundball - my v2 didnt even move that much on the discripted part, its like 1/10 of a mm of wiggle. is that accaptable? bending it didnt reduce the wiggle.
    thx for the help, noob here

  • @markmcgraw1070
    @markmcgraw1070 4 года назад +4

    I want that Felix the Cat shirt.

  • @matthewwain9958
    @matthewwain9958 4 года назад

    Great video :) Simple, and it works.

  • @doesntmatter5857
    @doesntmatter5857 4 года назад +1

    Fascinating that you take care of that, but First Strike does not.

    • @OgemowProductions
      @OgemowProductions 4 года назад +1

      I couldn’t agree more. First Strike should be having much better QT than that. I have always said that it should not be up to us as consumers to “fix” or “figure out” problems with products that we buy. The company’s we buy them from should have ALL the bugs worked out before they sell them to us. But then the argument could be made that they do have the bugs worked out but then they go to mass production and that is when things start going wrong. But I still say, that it STILL should not be our problem as consumers. We pay our money for something that should do what the company says it will do and to do it without problems... at least that’s how it should be. I wonder how many people had their day of paintball ruined because of this quality control issue. But it’s good that someone figured it out. I have been thinking about getting a T15 but I am a bit nervous to do so because they are SOOO expensive and I am hearing that people are having issues with them like this, leaks out of the box and having to put them through a “break in period” for them to start working properly. I wonder how many people that have them would actually recommend them?

    • @doesntmatter5857
      @doesntmatter5857 4 года назад

      @@OgemowProductions Consider this: The T15 has become a gun that many praise for running out of the box. But this is already generation four, thinking back what kinds of mods existed a couple of years ago, it was ridiculous. There is a good reason why companies like DSG make good money by sellig aftermarket parts, they literally just announced they would start selling a replacement power tube that replaces three different parts from the original T15 with a single one, has more precise measurements and has a regular threading in either A5 or Cocker. If that thing is any good, we will see. But there has to be a reason companies see business potential in offering better parts for existing guns. Novritsch literally founded his company on the idea that a customer could get a high quality airsoft gun for a solid price that does not need to be tweaked for days on end.

  • @LadiieD917
    @LadiieD917 3 года назад

    Someone needs to talk to first strike; this markers are costly and the first strike rounds are not cheap; I expect something fully functional that doesn’t require “”little fix”” or any modification at all... thats why other companies that make high end markers are doing better; is sad too I own a t15 myself

  • @drewkroeker
    @drewkroeker 2 года назад

    Best way to fix first strike feeding issues... buy an EMF100! 😄

  • @lockmanni1619
    @lockmanni1619 4 года назад

    FSR in the US Are $180 for 600pcs ! That's not expensive ! In Germany we pay 240€ for 600FSR 🤣THATS EXPENSIVE !!!

    • @slammerammer
      @slammerammer 4 года назад

      ha in new zealand that would be 320 euro's for 600 with the hugh range in weight per round its a raping

  • @francobaggage
    @francobaggage 4 года назад

    g