I love it! Just a little bit of advice. 1.Make sure you printer is sitting flat on table it helps 2. Make sure the paper is push all the way to the back 3. You must place the paper at the edge of the cutter 4. If you look inside the middle opening of the cutter the part that lifts up, you will see a wire. That wire shows where the cut will be made.
This was helpful and I didn't think about the packaging until you got to the point. I might just measure and get bags that will fit, but I love your idea.
I'm using a inkjet printer and yes I sprayed twice with the acrylic spray the decals sits overnight. Why are my stuff coming out digital looking? I want them to be super clear and clean. Also, when I dip in water the color faded a bit. Please help! Thanks! Oh I have a Canon printer
Does the customer have to cut out each individual nail sticker or could I use a Cricut to cut them but stay on the paper until ready to ise like a sticker?
what kind of printer did you use? inkjet or laser jet? also, is there a way for it to be printed on adheshive paper instead of the water slide? thank you
Hey! You would have to cut around each decal, soak them in water for 15-20 seconds then separate the decal from the paper and apply it to the nail. It’s kind of similar to applying a fake tattoo 💙
I can't find the template you edited. With the template I made, the pictures go completely to the back and do not fill the inside of the cranes. please help...
Hello, you have such a nice video that is so helpful, thank you so much for sharing. My question is does this template only does full cover decals? Because I mostly use stiletto nails but I don't wish to have the whole nail covered. Is it possible if I only want to put like 2 small flowers on a nail or a name. Is it possible.? I really don't like full cover decals. Thanks for showing this video.
Thank you💚Instead of using the template, what you can do is make a document using pages or word and add a bunch of pictures that you would like turned into decals onto the document. Make sure to shrink them to the size you prefer, then print them on the decal paper. I hope that makes sense 😂
I personally use my laptop because I haven’t figured out how to send the picture behind the template without using a mouse. I hope that makes sense 🤣😩 and thank you so much😊
Yes, the water slide paper I use is for inkjet printers. Water slide paper is more transparent than photo paper. I’ll be posting a new video about decals and nail stickers this week. Hopefully that will clear up your questions 💚
I use water slide decal paper. You can find some on Amazon. The spray helps with the transfer process, it make sure the image doesn’t bleed into the water when the decal is soaked. 💚💚
Hey hey! I actually made an updated video and I spoke on the warnings for using the acrylic spray, definitely check that out. But I highly recommend to spray it outside 💜
How many coats of the Acrylic coating do you use? Is the decal hard to get off? I had some that a even with nail polish were hard to remove because of the coating used.
I loved your video! I did this and they printed out perfect, but once I dipped it in water the ink just smeared. Is there a certain ink we need for this?
It’s a canon TR4720 www.staples.com/canon-pixma-tr4720-inkjet-printer-print-scan-copy-fax-5074c022/product_24579720?cid=PS:GS:CO:PLA:Canon:Printing&gad_source=1&gbraid=0AAAAAD-acddYUN3qDMXSPw1n2HT5F7Cbn&gclid=CjwKCAjwxLKxBhA7EiwAXO0R0ITF2M6J3Gpq64FqgZ1hrhSEMOfko-HQ2KtIcYN19EDWUplFfkkqXBoCmOsQAvD_BwE
Thank you so much! I do have the premium features which allows me to use different fonts but once you download the nail template you can use the free features on Canva to make your own decals💙
hi i made mine just like you here but when i place my decal on full presson nail it doesnt fit all the way side to side am i doing something wrong? the length is ok for short nails.
Hey babes I make nail decals also however this temples is dope u mind sharing where u got it from I know u said esty but who is the person I have to look up in order to find it? Also was it expensive?
I am so new to nail art and this printable decals, my daughter in law is into the nail art so I thought I would look into it since I am a quick learn and atm am learning AI art. Having said that, I did use a printer back in the day for cards labels and photos but not at all lately. I am curious, my daughter in law is Goth..type.. I was wondering if I can create AI art to be used in this nail art? As a digital Artist and photographer I just wanted to add jpg format blurs png does not . Just to clarify what printer, program and paper do you use? is there a resolution for these stickers?
The decals are printed on water slide decal paper. You would have to cut the pictures out, put them in water then apply them to the nail. I hope that helps! 💚
Any tips on how to get my decals to stop wrinkling once out of water? It rolls up and then when I dry it off and roll it back out it wrinkles and breaks up.
thinking you may have received Tattoo paper instead... they look the same but Tattoo paper has the clear film... try putting it on your nail upside down and then wetting the white back...
Almost everyone, but I noticed if you have very wide nail beds or if you wear press ons then it may not be quite the width you want. I'm still working on width for mine. But they fit most. Like with nail wraps.
I love it! Just a little bit of advice. 1.Make sure you printer is sitting flat on table it helps 2. Make sure the paper is push all the way to the back 3. You must place the paper at the edge of the cutter 4. If you look inside the middle opening of the cutter the part that lifts up, you will see a wire. That wire shows where the cut will be made.
Definitely will try this in the updated video! Thank you 💚
Just found your channel! I want to thank you for sharing this great business idea for a side hustle ❤ thank you so much!!!
Awww 💚💚 thank you for watching
This was helpful and I didn't think about the packaging until you got to the point. I might just measure and get bags that will fit, but I love your idea.
what resolution should photos be for decals?
I heard that you can drag the designs from page one to page two and the lines are suppose to be removed? Have you done this before?
Can you show how you apply the decals to your nails please
I'm using a inkjet printer and yes I sprayed twice with the acrylic spray the decals sits overnight. Why are my stuff coming out digital looking? I want them to be super clear and clean. Also, when I dip in water the color faded a bit. Please help! Thanks! Oh I have a Canon printer
Does the customer have to cut out each individual nail sticker or could I use a Cricut to cut them but stay on the paper until ready to ise like a sticker?
Id like to know this too lol
You can kiss cut. Search how to kiss cut with Cricut on RUclips! Hope that helps!
what kind of printer did you use? inkjet or laser jet? also, is there a way for it to be printed on adheshive paper instead of the water slide? thank you
I use a inkjet printer. I’m not sure about the adhesive paper I’ve never tried it.
Hey, just wondering, how do you put them on your nails?
Hey! You would have to cut around each decal, soak them in water for 15-20 seconds then separate the decal from the paper and apply it to the nail. It’s kind of similar to applying a fake tattoo 💙
I can't find the template you edited. With the template I made, the pictures go completely to the back and do not fill the inside of the cranes. please help...
If you slide the paper to the top of the paper cutter, it will automatically keep it straight and give you straight lines.
Dropping gems thanks queen
Thank you for sharing. This has been very helpful.
Hello, you have such a nice video that is so helpful, thank you so much for sharing. My question is does this template only does full cover decals? Because I mostly use stiletto nails but I don't wish to have the whole nail covered. Is it possible if I only want to put like 2 small flowers on a nail or a name. Is it possible.? I really don't like full cover decals.
Thanks for showing this video.
Thank you💚Instead of using the template, what you can do is make a document using pages or word and add a bunch of pictures that you would like turned into decals onto the document. Make sure to shrink them to the size you prefer, then print them on the decal paper. I hope that makes sense 😂
@@virgoatmarie Thank you so much for your information👍❤
Hi! I bought a printer and paper as well. But im wondering. If you sell these images from google, isnt there a problem with the author wrights?
yes. it's better to use royalty free images because the owner of the images can always decide to take legal action.
So helpful thank you so much for this video! Can canva be used on an iphone to create these nail decals or those it have to be on a laptop? Or iPad?
I personally use my laptop because I haven’t figured out how to send the picture behind the template without using a mouse. I hope that makes sense 🤣😩 and thank you so much😊
@@virgoatmarie definitely helps! Thank you 💖
May I ask what packaging paper u use
You can use any printer? As long as you use water slide paper? Is water slide paper the same as photo paper?
Yes, the water slide paper I use is for inkjet printers. Water slide paper is more transparent than photo paper. I’ll be posting a new video about decals and nail stickers this week. Hopefully that will clear up your questions 💚
What type of paper do you print it on? Does the spray make it adhesive or the paper?
I use water slide decal paper. You can find some on Amazon. The spray helps with the transfer process, it make sure the image doesn’t bleed into the water when the decal is soaked. 💚💚
How long of a shelf life do these have after printing and sealing? Awesome video
These decals last for a very long time. I have some old ones from almost 2 years ago that are still in tact💙
@@virgoatmarie thank you so much. I’ve had a difficult time finding an answer to this. Do you seal before storing them?
@@angelsandfaes yes I’ll put them in separate plastic baggies and store them in a drawer ☺️
The problem happened when I clicked on your Etsy link it wasn't my account. So I purchased this item and others, it doesn't show them as purchased.
Is the acrylic spray safe? Are there any side effects?
Hey hey! I actually made an updated video and I spoke on the warnings for using the acrylic spray, definitely check that out. But I highly recommend to spray it outside 💜
How many coats of the Acrylic coating do you use? Is the decal hard to get off? I had some that a even with nail polish were hard to remove because of the coating used.
I used 2 coats of acrylic and it was fairly easy to remove the decal from the paper once it’s dampen with water 💜
I loved your video! I did this and they printed out perfect, but once I dipped it in water the ink just smeared. Is there a certain ink we need for this?
Idk if you figured it out yet but I think you need to seal it with something
You have to spray it with clear acrylic gloss to seal it
The ideal is to be printed with a laser printer and at the end seal the decals
This was super helpful. Thank you!
You’re welcome!
Sorry I need help I don’t see the template you are using even when click on link. Did the template change. Also will the template work for all nails
If you go to Etsy and type in “nail decal template” look for the vender DopeBubble. This is the template I used.
The template works for all nail sizes 🤗
Thank you for this, do you have a link for the printer???
It’s a canon TR4720 www.staples.com/canon-pixma-tr4720-inkjet-printer-print-scan-copy-fax-5074c022/product_24579720?cid=PS:GS:CO:PLA:Canon:Printing&gad_source=1&gbraid=0AAAAAD-acddYUN3qDMXSPw1n2HT5F7Cbn&gclid=CjwKCAjwxLKxBhA7EiwAXO0R0ITF2M6J3Gpq64FqgZ1hrhSEMOfko-HQ2KtIcYN19EDWUplFfkkqXBoCmOsQAvD_BwE
@@virgoatmarie thank you
What printer model are you using
So I have the same program but mine are printing too large or I think so. Can you show your decals how big they are maybe I’m tripping
video was really inspiring and helpfull, I was trying for such videos, but I am unable to get this products in India.
How are these used?
Hello! Love this video, I was just wondering do you use the free features on canvas to make these or do you pay for the premium features? Xx
Thank you so much! I do have the premium features which allows me to use different fonts but once you download the nail template you can use the free features on Canva to make your own decals💙
@@virgoatmarie awesome thanks!!
Hello how can i find the templates
@@MegaManuela82 assuming you search for nail wrap templates
hi i made mine just like you here but when i place my decal on full presson nail it doesnt fit all the way side to side am i doing something wrong? the length is ok for short nails.
Which decal size are you using? The template has larger decal sizes.
What type of printer paper do you need to print the decal paper on? Link?
I use water slide decal paper. You can find it on amazon 💚
Between each decal/wrap, is there still clear decal paper? I know when I purchase the small non wrap designs, it's not there.
You have to spray the decal with acrylic paint to get the clear coating 💙
Hey babes I make nail decals also however this temples is dope u mind sharing where u got it from I know u said esty but who is the person I have to look up in order to find it? Also was it expensive?
Hey love! I actually linked the Etsy shop where I got this template from in the description box🤗 it’s only $25 and you can keep it forever !
@@virgoatmarie thank you I actually bought it already been using it I love it
I think I missed how to apply them from the paper. I see people talking about water but can anyone help with how to do it? :))
How long should I allow the acrylic to sit on the Decal before use?
I would say an hour or two until it’s completely dry 💚
Hi, I'm from the PH. Love your video! Can I also use your template for personal use?
The template is actually not mine, you may have to message the creator on Etsy 💙
Where do You get the clear plastic bags from?
I got the poly bags from Amazon 💚
I am so new to nail art and this printable decals, my daughter in law is into the nail art so I thought I would look into it since I am a quick learn and atm am learning AI art. Having said that, I did use a printer back in the day for cards labels and photos but not at all lately. I am curious, my daughter in law is Goth..type.. I was wondering if I can create AI art to be used in this nail art? As a digital Artist and photographer I just wanted to add jpg format blurs png does not . Just to clarify what printer, program and paper do you use? is there a resolution for these stickers?
I don’t understand this video. So I can print ovals on a printer and how does that get applied to a nail though ?! So confused
The decals are printed on water slide decal paper. You would have to cut the pictures out, put them in water then apply them to the nail. I hope that helps! 💚
Can you give me the link to buy that template please
It’s in the description box
Hello new follower and new at all this!!
Thank you so much for subscribing and stay tuned I’ll be uploading a new video about nail decals and nail stickers 💚
@@virgoatmarie thank you. I had a rough start to this on my lap top. But everything worked out from my phone. Thank you for the detailed video.
Any tips on how to get my decals to stop wrinkling once out of water? It rolls up and then when I dry it off and roll it back out it wrinkles and breaks up.
I seen on another video that you may be leaving it in water too long.
@@memeb8337 thank you 💕
You may not have enough coating or may be in water too long. Both cause the issue, I've found.
i dont get it, how would you stick them to your nails?
It’s like the tattoos we had when we were kids! Water slides it off the sheet.
where you buy the template?
You can find the link to the template in the description ☺️
Hi, I used this method and mine came with a clear film and doesn’t stick. Idk what I’m doing wrong
Hey girl! What kind of paper are you using? What printer do you have?
thinking you may have received Tattoo paper instead... they look the same but Tattoo paper has the clear film... try putting it on your nail upside down and then wetting the white back...
where can i get the template?
Template is located in the description box 💚
Does this size works for everyone’s nails?
Almost everyone, but I noticed if you have very wide nail beds or if you wear press ons then it may not be quite the width you want. I'm still working on width for mine. But they fit most. Like with nail wraps.
What is the measurement for the actual decal?
The decals have different measurements on the template. The sizes range from 40mm to 50mm
Do you need a type of
Printer or can you use anyone?
You need a inkjet printer and it has to be able to print on glossy photo paper💙
Good
Thank you 😊
i didnt catch what kind of paper was used
I used water slide decal paper. You can find it on Amazon 💚
Verre marri😂😂
Still very helpful❤️🙏🏾 Thanks;)
I’m a little bit mad when u didn’t cut it in straight line 😂😂😂
What is that application? What's its name?
I’m using Canva 💙
The application needs to be paid to use the program or it is free
It can be used on the phone to make sticker for nail decals