Half-blind Boxed Tennon joint. Commonly known as the Pask Joint. Beautiful, yet simple joint you came up with. I've never seen anything like it. This is why I love your content.
I'm late to the party, but this is a very 'Art Deco' looking result. There was a French furniture designed called Eugène Printz who made geometric Deco cabinets - I think if this joint had been around, he would have used it, so similar it is to his style. If you're looking for alliteration, you could call it the 'Pask Printz Joint' so it ties in with the Deco style - or simply the 'Pask Deco Joint'.
I have done some woodworks in the past but this woodwork plan ruclips.net/user/postUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG helps me do much in a far lesser time than i used to do i have already built several projects with this plan and i intend to do many more soon. Thank you so much!
Yet another vote for calling it the "Pask Joint"! Seriously, unless you can find it in an old book about joinery, I think you invented it and therefore it deserves your name. Great video, Neil!
That's what I love about these videos. You have a problem with the mortising bit and you come up with a quick solution. It's just like any problem you see can be solved with a good bit of thought and elbow grease. Very cool
I at first thought a "Pask Joint", which I see many others have as well, but it then occurred to me that ye might go for inventing more joints in the future. So now I'm thinking maybe a "Pask Box Joint"? It seems kinda like a relative of a box joint, with a very high-end look! I could see that being made use of in some beautiful furniture.
I have been into woodworking videos and into woodworking it self for quite some time now. And your content besides beeing briliant is just so... fresh. Thank you.
I love this "Encased Finger Joint" or "PASK joint". Loads more glue surface than a typical finger joint. This should be one strong joint when used in strong woods. And, it looks great too! Nicely done.
Welcome to the "Pask Makes Wierd Joinery" channel where every week we upload a crazy new/old dovetail alternative. So grab your tightbond and a chisel and stick around to see what bizarre tools we invent just to make these joints! Next week we'll be trying a "French braid" using nothing but scissors and hairspray.
@@mikedrop4421 Spelling police here. Just install Grammarly as an extension. You will never hear from me again. It's free, just unsubscribe from the first email and you will never hear from them either.
I have a drill press mortising attachment that takes this type of bit. You were correct to give the inner bit the clearance you did. I love this joint and will try it sometime. This is your design so it should bear your name. Cheers!
A great contribution, the "Pask Joint". I think your competence has allowed you to underestimate the time to build the jigs & actually execute the joint.
@PaskMakes thanks for the lesson. I bought a set of these mortise bits not knowing I needed an adapter. I don't have a teacher other than RUclips university. Knowing is half the battle. Now I can think of a jig.
Neil. I agree with the many other comments. This should be known as the Pask Joint or as someone else coined, the Pask box joint. Fantastic as always. Thank you.
Great video as usual! Having been fortunate enough (after many years of pining for one) to find an affordable mortiser on Craigslist, this is now going to be my “go to” method of drawer construction. Thanks for introducing us to the “Pask Joint”!!
I believe it’s a “through tongue and rabbet joint”. I’ll have to dig out my copy of the “Encyclopedia of Furniture Making“, though your approach to mortising is unique.
I cut my teeth on Joyce, and I recall nothing there about this. Quite content to christen it Pask Joint! Highly inventive, this fellow; not only that, but he really can make it happen!
Love it! Thanks for another awesome video. You've become a leading source of inspiration for my work, and I've been humbled by your level of patience and detail.
I was going to suggest "Squared Knapp Joint", but since it appears to be the first of its kind, the inventor must get credit. Pask Joint it is! I'm going to make some.
This is such a good looking joint. I must try getting some mortising bits and giving your set up a try. I'm going to make the stop leg so it goes either side of the drill colomb with plenty of slack then put studding in from each side to locate and finely adjust it . Great video thanks
Dude I do the same thing to get to a measurement I want. I push it up against the blade while it's not spinning! I've never seen anyone else do that. I'm glad to see I'm not the only one!!
Hi, I have a mortiser and use it on a lot of my projects, you are right when you say the drill bit needs room to move and not tight to the chisel. There should be between a 1/8 and 3/16th's of an inch space according to my Mortise manual.
it's never too late for a comment... "...this one's my first test peace, it's not particullarly good..." WHAT IS THIS MANIAC TALKIN' ABOUT??? A brilliant peace of both work and art!!!
This looks really lovely and I think would be great for decoration on a box. You could even leave them proud and add bevels to them to make a kind of point. Might look cool.
Great looking joint. I hope that new Makers Mob doesn't change you or your content. I used to follow most of them other guys until money became their god. I really look forward to the stuff you put on here.
Thanks Hugh! Rest assured my channel will be staying the same as long as I keep thinking of new projects. We all have to make a living though so unfortunately money is important. :)
Great work Pask Makes. At the end ( 14:47 min) when you compared the two joints I got an idea, maybe you can do another joint; combine the square pegs with the round pegs (the Knapp Joint) so the Knapp Joint lose the scallops. So make the Knapp Joint without the scallop, this way you don't need the square chisel bit and the complicated scallops ? Hope you have the time to make it ! Thanks.
Thanks Mark! That is a known joint and you should be able to find examples with a search. It's easier than the scallops but even though it looks good it isn't as striking as the other two joints. I do still like it though. I was going to include it in my last video but it was getting too long. :)
Thanks @@PaskMakes. It should be fast to make the scallop-less Knapp Joint; you already have the toll to make the pegs and the template to make the hole :)
Very nice! 💝☀🌵 p.s. thanks for all you do! That trick with the mortising bit will save me a ton of money! Another great hack. Don't let those armchair woodworkers get you down. Those jigs make it possible for beginners like me to have any hope making these projects.
Very interesting joint, beautiful and simple, but Holy Cow! I just followed the link to your art photography page. Gorgeous work! I didn't realize you were a gifted photographer in addition to being a great woodworker/teacher.
This is a great joint. It will save me time and frustrations. Mistakes are a problem with me so those dovetails can take a hike. I have a name for it. MINE
I admire your practical approaches which mirrors my own take on woodworking. Not being into hero worship, I would call the joint a "square-tail joint". Even so, I couldn't possibly take anything away from your creative persistence. Good job and a good education for those who are technically challenged.
Just watched a video from EngelsCoachShop and he was using a Bit of the same style to drill out large mortises, it might be worth messaging them to ask about how it's mounted in the drill press. Brilliant joint, looks great and I'm guessing the Pask Joint would be not only stylish but strong as well. I love that you show your balls-ups, so many channels show everything perfectly yet they MUST make some mistakes (we all do).
If I use this I will refer to it as a Pask joint, and I will encourage others to do the same. I might try this soon, apart from the morticing bit and the home made jigs I have everything I need, including some woods with contrasting colours.
Looks good. Well done. The Knapp joint is more decorative, but this square pin joint looks to be stronger and looks to be easier to make. If you were in the US I would send you my Delta mortise attachment for a drill press. It does not fit on my Powermatic floor standing drill press. I tried this once on a bench style drill press where it did fit. I was not able to get the chisel to make the cut. I even tried pre-drilling most of the hole first. Still not able to create sufficient force on the small drill press. This now is used to collect dust, a task for which it excels. Dave.
Thanks very much Dave! I've always known the mortising attachments for the drill press aren't too good but mine worked surprisingly well. I found it best to apply a little pressure, back off and let the chips clear then go again. It takes a little longer but it doesn't get clogged that way. I'm not sure I would've even tried this if I didn't have the bit sitting there. :)
Very good video. Thanks for sharing. I don't know if I'll ever make this joint (I vote for the name Pask Joint as well) but at least now I know how to make a square hole.
Awesome! Hey another simple idea for making the template... just cut a bunch of 1/4 & 3/8 inch wide strips plywood, mdf, etc. and glue up the strips like a cutting board, 1/4 followed by 3/8, followed by 1/4 and so on, then just leave a 3/8 gap in your 3/8 strips and you’ll create your template with a row of square holes. Another idea is to cut a simple box/ finger joint using a quick box joint jig with 3/8 in cuts, 3/8 inch deep every 1/4 inch.. so the box joint fingers are 1/4 inch... after you cut your box joint, then just glue a 1/4 inch piece of wood across the top of your box/ finger joint and you’ll have an evenly spaced, row of nice square holes to use for your template.
Hi Neil, In the video you said that the bit wobbles too much to use it to make a mortise & tenon joint. However it should be possible to make a simple template for mortises, in the same way that you made the one for these joints. Great work - love your channel!!
Half-blind Boxed Tennon joint. Commonly known as the Pask Joint. Beautiful, yet simple joint you came up with. I've never seen anything like it. This is why I love your content.
Wow! Thanks for the likes everyone!
Thanks very much Joe! :)
Yeah, I'd go along with the Pask Joint. Half blind boxed tennon joint sounds correct... but Pask joint is less of a mouthful
I feel like we need some alliteration like peeking pask joint or post-hole pask joint you know? Anyone got anything better?
I'm late to the party, but this is a very 'Art Deco' looking result. There was a French furniture designed called Eugène Printz who made geometric Deco cabinets - I think if this joint had been around, he would have used it, so similar it is to his style. If you're looking for alliteration, you could call it the 'Pask Printz Joint' so it ties in with the Deco style - or simply the 'Pask Deco Joint'.
I have done some woodworks in the past but this woodwork plan ruclips.net/user/postUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG helps me do much in a far lesser time than i used to do i have already built several projects with this plan and i intend to do many more soon. Thank you so much!
Yet another vote for calling it the "Pask Joint"!
Seriously, unless you can find it in an old book about joinery, I think you invented it and therefore it deserves your name. Great video, Neil!
I think we should call it the waste of time ugly joint. Or maybe the "requires a special tool" joint. Perhaps retardo joint?
That's what I love about these videos. You have a problem with the mortising bit and you come up with a quick solution. It's just like any problem you see can be solved with a good bit of thought and elbow grease. Very cool
Thanks! Glad you enjoyed it! :)
Clearly is should be called a Pask Joint!!!!
Beat ya to that name!!
Literally just said almost exactly the same thing without reading the comments.
Not really it is just a series of MORTICES .
totally
Hell yeah!! 👍🏼
I think that you are one of the most innovative wood workers on RUclips today. I hope you continue making videos for a long time.
Thanks very much Tom! :)
I at first thought a "Pask Joint", which I see many others have as well, but it then occurred to me that ye might go for inventing more joints in the future. So now I'm thinking maybe a "Pask Box Joint"? It seems kinda like a relative of a box joint, with a very high-end look! I could see that being made use of in some beautiful furniture.
I have been into woodworking videos and into woodworking it self for quite some time now. And your content besides beeing briliant is just so... fresh. Thank you.
Thanks very much Borys! :)
You continue to astonish Neil. Your self-deprecating style and honesty shine through. This should definitely be called a Pask joint.
I love this "Encased Finger Joint" or "PASK joint". Loads more glue surface than a typical finger joint. This should be one strong joint when used in strong woods. And, it looks great too! Nicely done.
That joint is so beautiful it deserves to be made into a the corners of a decorative box..
That’s a ton of work to get it set up but clearly worth it ....... the joint is beautiful! Excellent job!
Better than teach us how to do nice tools, you Sir, teach us the thought process. Even better than this , you inspire us. Regards from Brazil. Thanks!
Welcome to the "Pask Makes Wierd Joinery" channel where every week we upload a crazy new/old dovetail alternative. So grab your tightbond and a chisel and stick around to see what bizarre tools we invent just to make these joints! Next week we'll be trying a "French braid" using nothing but scissors and hairspray.
Haha! That's it for new joints, now I need to put them to some use! :)
@@thealchemist5376 I'll continue speeling itt inncorectley as long as the spelling Police keep responding
@@thealchemist5376 and what does that make you then?
@@thealchemist5376 no sweat, just having a laugh. Take care mate.
@@mikedrop4421 Spelling police here. Just install Grammarly as an extension. You will never hear from me again.
It's free, just unsubscribe from the first email and you will never hear from them either.
I've had a loose mortising bit for years with no way of using it, this is just what I need. Thank you!
I am always amazed by your creativity and and ability to problem solve.
I have a drill press mortising attachment that takes this type of bit. You were correct to give the inner bit the clearance you did.
I love this joint and will try it sometime.
This is your design so it should bear your name.
Cheers!
Thanks Don, that's good to know. :)
There are so many ideas in this video, I'll have to watch is about 8 or 10 times. That chisel-drill on your drill press is marvelous.
What I also appreciate is those stop motions you do! 😁
A great contribution, the "Pask Joint". I think your competence has allowed you to underestimate the time to build the jigs & actually execute the joint.
One of your best videos ever - love the project, the stop motion and the end result. I'm so impressed that you keep going from strength to strength!
Thanks very much Mattias - glad you enjoyed it! :)
i love your work, you pop up the woodworking game with your jig for the joinery. hello from France.
@PaskMakes thanks for the lesson. I bought a set of these mortise bits not knowing I needed an adapter. I don't have a teacher other than RUclips university. Knowing is half the battle.
Now I can think of a jig.
Neil. I agree with the many other comments. This should be known as the Pask Joint or as someone else coined, the Pask box joint. Fantastic as always. Thank you.
That is really pretty. Lots of work to set up, but once you have the process refined, seems easy enough.
Results are really impressive.
Great video as usual! Having been fortunate enough (after many years of pining for one) to find an affordable mortiser on Craigslist, this is now going to be my “go to” method of drawer construction. Thanks for introducing us to the “Pask Joint”!!
This is what I like about your channel... You're always thinking "outside the box".
Closed finger joints,they are nice to look at especially with the diy clever tools to make them
Hell of a contact surface with this one and much more easier than the past joint you "invented". Brilliant work sir!
I believe it’s a “through tongue and rabbet joint”. I’ll have to dig out my copy of the “Encyclopedia of Furniture Making“, though your approach to mortising is unique.
I cut my teeth on Joyce, and I recall nothing there about this. Quite content to christen it Pask Joint! Highly inventive, this fellow; not only that, but he really can make it happen!
Pask joint
Love it! Thanks for another awesome video. You've become a leading source of inspiration for my work, and I've been humbled by your level of patience and detail.
Thank you Soren - glad you're enjoying the videos! :)
I was going to suggest "Squared Knapp Joint", but since it appears to be the first of its kind, the inventor must get credit. Pask Joint it is! I'm going to make some.
The "Pask Joint" it is! I'll start spreading the word here in Middle Tennessee USA....
That's a brilliant way of using a mortising bit in a drill press.
This is such a good looking joint. I must try getting some mortising bits and giving your set up a try. I'm going to make the stop leg so it goes either side of the drill colomb with plenty of slack then put studding in from each side to locate and finely adjust it . Great video thanks
Absolutely gorgeous joint and I'm so impressed by the jigs you engineered! 😍
i've watched this video three times now and it has inspired me to get my workshop set up again. Thank you!
I might call it a rabbeted mortise and tenon. Very cool, thanks!
Presentation skills continues to evolve and I actually sung out Ta Da when you said "fingers crossed it fits together" and it did.
Thanks very much! :)
I was literally just thinking about a joint like this and you problem solved it for me. Nice work.
Genius, very cool joint and a slick way to set up for it. I'll second the idea to call it a Pask joint.
Dude I do the same thing to get to a measurement I want. I push it up against the blade while it's not spinning! I've never seen anyone else do that. I'm glad to see I'm not the only one!!
Hi, I have a mortiser and use it on a lot of my projects, you are right when you say the drill bit needs room to move and not tight to the chisel. There should be between a 1/8 and 3/16th's of an inch space according to my Mortise manual.
it's never too late for a comment...
"...this one's my first test peace, it's not particullarly good..."
WHAT IS THIS MANIAC TALKIN' ABOUT???
A brilliant peace of both work and art!!!
Nice once again. Kind of like a box joint but with the end covered over... Thumbs Up!
Very cool joint! I especially like the simple tool for using the mortising chisel bit.
Love the joint and the method, thanks. The stop motion at the end was a great touch.
Thank you - glad you liked that! :)
Highlight of my week is when Pask posts a video. Another good one
This looks really lovely and I think would be great for decoration on a box. You could even leave them proud and add bevels to them to make a kind of point. Might look cool.
I'm sure there's a less stupid way of describing what I mean.
@@TheLunnyBear nah, that's actually a really cool idea! very Greene & Greene
Very impressive Dovetail Joint jig Sir !!!!!!!!!!!!
I think i like this even more than the Nut tail joint you made. Great stuff.
Great looking joint. I hope that new Makers Mob doesn't change you or your content. I used to follow most of them other guys until money became their god. I really look forward to the stuff you put on here.
Thanks Hugh! Rest assured my channel will be staying the same as long as I keep thinking of new projects. We all have to make a living though so unfortunately money is important. :)
Great work Pask Makes.
At the end ( 14:47 min) when you compared the two joints I got an idea, maybe you can do another joint; combine the square pegs with the round pegs (the Knapp Joint) so the Knapp Joint lose the scallops.
So make the Knapp Joint without the scallop, this way you don't need the square chisel bit and the complicated scallops ?
Hope you have the time to make it ! Thanks.
markspc1 That would be a gorgeous alternative!
Thanks Mark! That is a known joint and you should be able to find examples with a search. It's easier than the scallops but even though it looks good it isn't as striking as the other two joints. I do still like it though. I was going to include it in my last video but it was getting too long. :)
Thanks @@PaskMakes. It should be fast to make the scallop-less Knapp Joint; you already have the toll to make the pegs and the template to make the hole :)
@@MonicaLN Thank you Monica, hope Pask have the time to make it.
I’d call it a Pask joint. Absolutely lovely!
1/2 blind peg joint, but then I totally agree with 1/2 blind Pask joint. Thanks I learned a lot today!!!
It's been a while since I've seen your work. You have radically upped your game. Congratulations!!
Very nice! 💝☀🌵 p.s. thanks for all you do! That trick with the mortising bit will save me a ton of money! Another great hack. Don't let those armchair woodworkers get you down. Those jigs make it possible for beginners like me to have any hope making these projects.
Thank you Suzi! :)
Excellent again! With your metal working skills, you could easily make the drill press mount for the mortise bit, and improve the drill press wobble.
Very interesting joint, beautiful and simple, but Holy Cow! I just followed the link to your art photography page. Gorgeous work! I didn't realize you were a gifted photographer in addition to being a great woodworker/teacher.
What a great jig! Beautiful joint!
This is a great joint. It will save me time and frustrations.
Mistakes are a problem with me so those dovetails can take a hike.
I have a name for it. MINE
Square Peg Pask Joint. Beautiful !!
Great video, like the way you create tools to make your job easier and quicker repeatable
Very impressed! I love the new "Pask Joint"!
Awesome joint. Well done. Absolutely love your channel.
Pask joint. Going once. Twice. Pask joint it is.
. . . what a superb animation / recapitulation at the end of your video !!!
Great jointing system. Greetings from Scotland!
Excellent joinery Neil. Great video mate
Just saw this video and instantly subscribed. You're a genius man!
Definitely a mortise and tenon joint! Incredibly strong!
That is quite a nice looking wood joint mate! I agree with the other comments, it should henceforth be known as the "PASK JOINT"!
Amazing ingenuity....the Pask Joint. Thank you Sir for sharing
I admire your practical approaches which mirrors my own take on woodworking. Not being into hero worship, I would call the joint a "square-tail joint".
Even so, I couldn't possibly take anything away from your creative persistence. Good job and a good education for those who are technically challenged.
Just watched a video from EngelsCoachShop and he was using a Bit of the same style to drill out large mortises, it might be worth messaging them to ask about how it's mounted in the drill press.
Brilliant joint, looks great and I'm guessing the Pask Joint would be not only stylish but strong as well.
I love that you show your balls-ups, so many channels show everything perfectly yet they MUST make some mistakes (we all do).
I constantly have the feeling you are a wizard!
If I use this I will refer to it as a Pask joint, and I will encourage others to do the same. I might try this soon, apart from the morticing bit and the home made jigs I have everything I need, including some woods with contrasting colours.
Another amazing build Neil.
Pask Box!
Congrats on the Makers Mob!
Thanks Alf! :)
Pask Joint definitely!
Way cool Neil! Keep up the great work
beautiful joint - Can't wait to use the Pask Joint in a future project.
GENIUS!!! Simple yet exceptionally beautiful.
Great job Neil, called it the PASK Joint why not , have a nice day Mate !!!.
Unusual and pleasing on the eye! Well done.
Looks good. Well done.
The Knapp joint is more decorative, but this square pin joint looks to be stronger and looks to be easier to make.
If you were in the US I would send you my Delta mortise attachment for a drill press. It does not fit on my Powermatic floor standing drill press. I tried this once on a bench style drill press where it did fit. I was not able to get the chisel to make the cut. I even tried pre-drilling most of the hole first. Still not able to create sufficient force on the small drill press. This now is used to collect dust, a task for which it excels.
Dave.
Thanks very much Dave! I've always known the mortising attachments for the drill press aren't too good but mine worked surprisingly well. I found it best to apply a little pressure, back off and let the chips clear then go again. It takes a little longer but it doesn't get clogged that way. I'm not sure I would've even tried this if I didn't have the bit sitting there. :)
Your are No bull crap woodworker. I just love watching the videos.
That is freaking awesome! I love watching you figure this stuff out! Great job and fun to watch 👍
I've heard it said that this is called a Pask Joint. Once again, great job Neil! I have really enjoyed watching you create dovetail alternatives.
Very well done Neil. Now I have no excuse for not trying either of the two square hole drills that I bought on a whim through eBay.
Since I have a mortiseing tool, this will be my goto joint, I love it. Harbor Freight sells a cheep mortiseing machine that is perfect for this.
That cool joint for drawer !!
Very good video. Thanks for sharing. I don't know if I'll ever make this joint (I vote for the name Pask Joint as well) but at least now I know how to make
a square hole.
Awesome! Hey another simple idea for making the template... just cut a bunch of 1/4 & 3/8 inch wide strips plywood, mdf, etc. and glue up the strips like a cutting board, 1/4 followed by 3/8, followed by 1/4 and so on, then just leave a 3/8 gap in your 3/8 strips and you’ll create your template with a row of square holes. Another idea is to cut a simple box/ finger joint using a quick box joint jig with 3/8 in cuts, 3/8 inch deep every 1/4 inch.. so the box joint fingers are 1/4 inch... after you cut your box joint, then just glue a 1/4 inch piece of wood across the top of your box/ finger joint and you’ll have an evenly spaced, row of nice square holes to use for your template.
I thought about gluing strips and that would've been the next step if my method failed. Using finger joints is a good idea too. :)
Great job and great imagination enjoy watching your videos from California
you're getting over it, very good.
Hi Neil,
In the video you said that the bit wobbles too much to use it to make a mortise & tenon joint. However it should be possible to make a simple template for mortises, in the same way that you made the one for these joints.
Great work - love your channel!!
You are really and truely the best developper on youtube, I think a little bit crazy is essential - greetings from germany - thanks!
Brilliant! Thanks for sharing this!