I only wanted to replace my screen as it was cracked. I came across this tutorial in the search for 'replace Asus UX31a screen'. Having started the video, which was very tedious from the beginning, I began to follow the instructions. 8 mins in, I thought to myself that this cannot be right just to change a screen! I was up to the point of taking more of the components apart. You can see where I got up to by the timing. Wasted about three hours. Anyhow, such is my instinct told me to stop, I did. I put everything painstakingly back together and started on the screen removal. This was the by far the best way. It was so easy from start to finish and only took me an hour. If you are looking just to replace the screen, don't waste your time by watching the first 30 mins, it's so boring as especially there's no sound or dialogue as to what he was doing. But if you are looking for more than just replacing a screen, then watch by all means.
I understand your situation. I admire your willingness to fix it, specially knowing the fact that this laptop screen is hard to take apart because of the glue. This video is not for fun and I don't talk in these videos. No need, it is all the same. I hope you fixed your screen!!! Have a nice weekend!
@@regazzz Thank you so much! Yes, I have fixed my screen and so pleased with myself. My daughter actually couldn't believe that I actually did it (being female)! As I say always, RUclips is your friend!
Strong suggestion for a video this long: 1. Include timestamps of the main sections in the description. 2. Being a chatterbox is annoying, as so many instructional videos tend to be this way, BUT not saying a single word is incredibly frustrating as very useful information could be gained from comments along the way "this part here needs to snap out, you can feel the clips up here" or whatever. Because of the lack of any sort of annotation I found this video to be rage inducing and the only reason I watched it as much as I did is due to the lack of a single other video on youtube that shows replacing the keyboard on this system. Excellent visual detail, horrible on the very critically needed vocal annotation for things you cant see from a fixed angle.
+Ricardo Chavez (Mexikaner) all laptops where bezel is glued is hard. It gets out a bit easier if warm it up, but still, not as easy as regular setup. IMHO, Apple in this case is the worst.
Thanks for the detailed video! I need to replace a broken panel on my UX31e, and I have two questions: 1. Do you think it is absolutely necessary to to remove the panel assembly from the rest of the laptop before trying to replace the panel? From videos about older UX models, that seemed rather easy, but for this UX31e (looks same as yours inside) it appears that the entire motherboard and related items need to be removed to be able to disconnect the wires to the panel assembly. 2. What kind of tape/glue are you applying before putting the frame back on the panel assembly? Thanks again!
Hey ***** , first of all thanks for watching!1) I would say it is possible to remove internal screen without taking a whole laptop apart. I just feel more comfortable with removing this sticky front bezel while screen is off the machine. On the other hand, the point of this video is taking a laptop completely apart and not only removing a screen. There will be difficult to unplug video cable ...But not that bad I guess. Overall, I am sure if it will be not possible, you will be still able to remove a screen from laptop and do that separately. 2) I just have some regular two side tape, like 3M brand from a regular grocery store. Works well. In this video, as you can see I used this tape partially. I would say it will be better to use this tape to cover every place where bezel is attached to avoid any bubbles. And of course make sure everything, including web camera works prior gluing bezel back.
regazzz Hey, +regazz, I just wanted to get back to you and thank you for the advice. I was actually able to replace the display panel without taking it off the panel assembly from the rest of the laptop. Yes, the video cable was short, but not a big issue to reconnect. I used one of those microwavable iFixit heat pads to apply heat more directly to the frame to avoid damaging the laptop. (My only issue is that the panel is slightly different, and has a weird polarizing yellow tint effect, but it works) So thanks again. - Lars
***** Hey bud, is there any way you could give me some instruction? I got one of these for free and the only thing wrong with it is the LCD cracked. I'd love to fix it.
Skwerley doyle , Sure... I dug through my pictures and found some that I took during the procedure. I made a small Imgur gallery of my steps: imgur.com/a/SS5y3 (I added some description to the images) I had purchased my replacement panel from eBay for roughly $100, just make sure it is the right kind and that you get a glossy one. My matte one had a slight yellow tint, but it might have just been a lemon.
+Lars Joreteg Hey thanks for sharing your imgur photos! Very helpful! I've replaced many screens but this one is a tricky one! I was wondering if you maybe could answer the question I asked Regazz earlier > " @ 35:35 you start peeling off two silver sticky/tape-like parts which are stuck to the pcb. However I do not see you re-attach them. Are they of no importance?" Thanks!
Hello, Impressive work! I have a question regarding the RAM. I'm trying to find out if is possible to upgrade. I've been reading around and it seems that can't be replaced. After seeing your video I think you are the right person to ask :) Do you know if any of the pieces you remove is the RAM or is soldered to the base? If is replaceable, could you please point to the time stamp on the video where you removed? Thanks in advance! Br Javi
Hey buddy! Thanks for your vid, it could help me a lot but I have a question : I need to change the dead screen of my current Asus UX31E, can you tell me exactly which one I have to choose for the replacement ? (the least expensive would be great also, I don't care if it's not a genuine Asus screen ;) )
Hello regazzz, A while ago i disassembled my ux31a All fine (had a hard time to reassemble the tape to touchpad) except for audio. Don't know what i did wrong but i have no audio now. It's not a question of drivers (will not work even if i start a live linux usb), it seems i forgot to connect something. Could you please advice where's the audio parts that i seem to have missed. I check and check but can't find any loose cable/connector/tape... Thanks
At 1:00:30 those little connectors got dented and I can't plug them back in....do you have a link where I could buy them? I can't find them anywhere. TIA
Hi Regazzz and thanks for your upload. Takes guts to work with the guts of these laptops. I bruised the screen on my laptop and theres a white mark on the display. I have read that this can be easily fixed by applying some suction on the sheets in the back of the screen, the guide i saw used a womans razorblade suction device just real gentle to make the thing flat again. is it possible to remove the back covering without removing the front and disassembling the display? I just need access to the back panel and dont really feel comfortable taking the entire display apart. just looking for access to the flimsy sheets in the back. awaiting your response, thanks again.
Hi i have asus ultrabook ux31e i7 256gb ssd 4gb ram, I want to upgrade the ram. Is it possible. Some people say that it is not possible and some say that it is possible. I dont want to open laptop's inside without be sure. Please help me.
I would just simply go to eBay and search for it. Make sure you have exact UX31 number, I think there could be some differences between UX31A and UX31E. Also I know that the cable will be with the hinge. I don't think it is removable. If you search for used LED cable you will find it mostlikely with hinge.
Can anyone tell me where the ram is located? I just can't see it during the video which is bizarre because I build my own desktop computers. I have the UX31A version. Thank you so much regazz for putting this together for all of us.
Ivan Beoulve If ots the ux31a, try to recover windows or reinstall it. If that doesnt help an the bios also says it has only 4gb, then you have a hardware problem. The ram in the ux31a is soldered into the mainboard and it os those blacl squares when he opens up the bottom pannel, close to where is the ssd.
Claus Sørensen (sorry for month late response) Yes - it is possible, you will need to find a correct SSD and than reinstall all programs on the new one.
Is the LCD connector from UX31E compatible with one from UX31A? I'm asking becasue the TN display in UX31E is just horrible and I wanted to repalce it with UX31A's one.
Sudah saya coba dari HDMI laptop ke televisi, tetapi tetap tidak terbaca di televisi. Apakah ada cara yang lainnya, misalnya dari laptop yang satu ke laptop yang lainnya melalui USB, HDMI, dan lain-lain ?.
+Jose hernandez Rule number two. If you write with CAPS - means you are talking loud. Are you? Why? I never had any issues with my ring and electronics I am working with.
+Dan Vink if you don't like ads, use adblocker. And you can simply donate some $$ if video is helpful. This ads before the video aren't my sponsors. It is ads placed by RUclips because I allowed so and yes I am getting paid like that. Some ads are 15 sec unskipable. Some ads you can skip after 4 sec. Also pop-up banner can be closed. That's how RUclips works for a while. And btw. if you move on to another video and will not watch my and commercial before video, I will not earn a few cents, oh well.
I appreciate the polite answer - when I find a video useful, I do donate and I also pass it on to my co-workers. If those popups are out of your control - that is one thing. For instructional videos, having ads block the content is just a waste of time for viewers and if that is out of your control - I would look at the video - the ad placement and adjust the viewing area so that the information gets across to the viewer.
I only wanted to replace my screen as it was cracked. I came across this tutorial in the search for 'replace Asus UX31a screen'.
Having started the video, which was very tedious from the beginning, I began to follow the instructions. 8 mins in, I thought to myself that this cannot be right just to change a screen! I was up to the point of taking more of the components apart. You can see where I got up to by the timing. Wasted about three hours.
Anyhow, such is my instinct told me to stop, I did. I put everything painstakingly back together and started on the screen removal.
This was the by far the best way. It was so easy from start to finish and only took me an hour.
If you are looking just to replace the screen, don't waste your time by watching the first 30 mins, it's so boring as especially there's no sound or dialogue as to what he was doing. But if you are looking for more than just replacing a screen, then watch by all means.
I understand your situation. I admire your willingness to fix it, specially knowing the fact that this laptop screen is hard to take apart because of the glue. This video is not for fun and I don't talk in these videos. No need, it is all the same.
I hope you fixed your screen!!! Have a nice weekend!
@@regazzz Thank you so much! Yes, I have fixed my screen and so pleased with myself. My daughter actually couldn't believe that I actually did it (being female)! As I say always, RUclips is your friend!
@@Sarah-dy8ng I admire people who fix their technology and not just throwing it away! Such a great story! Thank you for sharing it!
Thanks! Just had to replace a screen on Dad's old laptop & this helped a lot.
Strong suggestion for a video this long:
1. Include timestamps of the main sections in the description.
2. Being a chatterbox is annoying, as so many instructional videos tend to be this way, BUT not saying a single word is incredibly frustrating as very useful information could be gained from comments along the way "this part here needs to snap out, you can feel the clips up here" or whatever. Because of the lack of any sort of annotation I found this video to be rage inducing and the only reason I watched it as much as I did is due to the lack of a single other video on youtube that shows replacing the keyboard on this system.
Excellent visual detail, horrible on the very critically needed vocal annotation for things you cant see from a fixed angle.
Thanks, I've used this a couple of times over the years to refurbish my laptop with used parts and keep it useful.
I do really appreciate it, THANKS!
Thanks for the video. I was able to repair (install new MB) my laptop thanks to it.
Thanks for the upload. Good stuff and very helpful. Perfect!
Thanks ! Greetings from Brasil
jajajja justo en el minuto 1.37 haces un gesto con las manos en plan..... uff por donde empiezo jajajjajaj amazing. great thanks
Es lo que ocurre cuando trabajas en un ultrabook de esos. Tienden a ser jodidamente complejos y no tienen nada reparable o actualizable.
regazzz Hi, could you please tell me where to find the adhesive you used to re-fix the screen protection ? Thanks :)
Display disassembly @ 27:03.
Is it just me or is that one of the more difficult displays to disassemble that I have seen....
+Ricardo Chavez (Mexikaner) all laptops where bezel is glued is hard. It gets out a bit easier if warm it up, but still, not as easy as regular setup. IMHO, Apple in this case is the worst.
Thanks, this was extremely helpful!
Thanks for the detailed video! I need to replace a broken panel on my UX31e, and I have two questions:
1. Do you think it is absolutely necessary to to remove the panel assembly from the rest of the laptop before trying to replace the panel? From videos about older UX models, that seemed rather easy, but for this UX31e (looks same as yours inside) it appears that the entire motherboard and related items need to be removed to be able to disconnect the wires to the panel assembly.
2. What kind of tape/glue are you applying before putting the frame back on the panel assembly?
Thanks again!
Hey ***** , first of all thanks for watching!1) I would say it is possible to remove internal screen without taking a whole laptop apart. I just feel more comfortable with removing this sticky front bezel while screen is off the machine. On the other hand, the point of this video is taking a laptop completely apart and not only removing a screen. There will be difficult to unplug video cable ...But not that bad I guess. Overall, I am sure if it will be not possible, you will be still able to remove a screen from laptop and do that separately. 2) I just have some regular two side tape, like 3M brand from a regular grocery store. Works well. In this video, as you can see I used this tape partially. I would say it will be better to use this tape to cover every place where bezel is attached to avoid any bubbles. And of course make sure everything, including web camera works prior gluing bezel back.
regazzz Hey, +regazz, I just wanted to get back to you and thank you for the advice. I was actually able to replace the display panel without taking it off the panel assembly from the rest of the laptop. Yes, the video cable was short, but not a big issue to reconnect. I used one of those microwavable iFixit heat pads to apply heat more directly to the frame to avoid damaging the laptop. (My only issue is that the panel is slightly different, and has a weird polarizing yellow tint effect, but it works)
So thanks again. - Lars
***** Hey bud, is there any way you could give me some instruction? I got one of these for free and the only thing wrong with it is the LCD cracked. I'd love to fix it.
Skwerley doyle , Sure... I dug through my pictures and found some that I took during the procedure. I made a small Imgur gallery of my steps: imgur.com/a/SS5y3 (I added some description to the images)
I had purchased my replacement panel from eBay for roughly $100, just make sure it is the right kind and that you get a glossy one. My matte one had a slight yellow tint, but it might have just been a lemon.
+Lars Joreteg Hey thanks for sharing your imgur photos! Very helpful!
I've replaced many screens but this one is a tricky one! I was wondering if you maybe could answer the question I asked Regazz earlier > " @ 35:35 you start peeling off two silver sticky/tape-like parts which are stuck to the pcb. However I do not see you re-attach them. Are they of no importance?"
Thanks!
Hello,
Impressive work!
I have a question regarding the RAM. I'm trying to find out if is possible to upgrade. I've been reading around and it seems that can't be replaced. After seeing your video I think you are the right person to ask :)
Do you know if any of the pieces you remove is the RAM or is soldered to the base?
If is replaceable, could you please point to the time stamp on the video where you removed?
Thanks in advance!
Br
Javi
Javier López Its soldered into the mainboard, at least in the ux31a model featured in the video.
Hey buddy! Thanks for your vid, it could help me a lot but I have a question : I need to change the dead screen of my current Asus UX31E, can you tell me exactly which one I have to choose for the replacement ? (the least expensive would be great also, I don't care if it's not a genuine Asus screen ;) )
Nice. Do you know if UX31E and UX31A motherboard is inter-exchangeable?
Hello regazzz,
A while ago i disassembled my ux31a
All fine (had a hard time to reassemble the tape to touchpad) except for audio. Don't know what i did wrong but i have no audio now. It's not a question of drivers (will not work even if i start a live linux usb), it seems i forgot to connect something.
Could you please advice where's the audio parts that i seem to have missed. I check and check but can't find any loose cable/connector/tape...
Thanks
What screwdriver did you use to unscrew those tiny keyboard screws? I've got a ph000x60 but it doesn't work. Thanks!
Please, I have this laptop and both the USB ports are damaged. How do I replace them and how would I replace the ram?
Thanks for this great video
At 1:00:30 those little connectors got dented and I can't plug them back in....do you have a link where I could buy them? I can't find them anywhere. TIA
thanx regazzz continue
saido bouallagui you are very welcome!
Can you tell exactly what type of T-screws (there are 10) that hold the bottom plate? I have lost one and would like to replace it.
What screwdrive have you used?
my Asus ux31e laptop always turns itself off
Can you tell me what's problem please
Hi Regazzz and thanks for your upload. Takes guts to work with the guts of these laptops.
I bruised the screen on my laptop and theres a white mark on the display. I have read that this can be easily fixed by applying some suction on the sheets in the back of the screen, the guide i saw used a womans razorblade suction device just real gentle to make the thing flat again.
is it possible to remove the back covering without removing the front and disassembling the display? I just need access to the back panel and dont really feel comfortable taking the entire display apart. just looking for access to the flimsy sheets in the back.
awaiting your response, thanks again.
That's the good thing about Thinkpad laptops. They are designed to be easy to take apart and pretty upgradeable.
Hi witch screw driver did you use ?
Can it be changed battery and minute video that's off? Thanks a lot!
HELLO!
what size of torx screwer is needed ?
Thnx!
Hi i have asus ultrabook ux31e i7 256gb ssd 4gb ram, I want to upgrade the ram. Is it possible. Some people say that it is not possible and some say that it is possible. I dont want to open laptop's inside without be sure. Please help me.
Hi, i was wondering what is the is the part no. for the lcd cable?
I would just simply go to eBay and search for it. Make sure you have exact UX31 number, I think there could be some differences between UX31A and UX31E. Also I know that the cable will be with the hinge. I don't think it is removable. If you search for used LED cable you will find it mostlikely with hinge.
Can anyone tell me where the ram is located? I just can't see it during the video which is bizarre because I build my own desktop computers. I have the UX31A version. Thank you so much regazz for putting this together for all of us.
Ivan Beoulve If ots the ux31a, try to recover windows or reinstall it. If that doesnt help an the bios also says it has only 4gb, then you have a hardware problem.
The ram in the ux31a is soldered into the mainboard and it os those blacl squares when he opens up the bottom pannel, close to where is the ssd.
can we upgrade rams and ssd?
I have an UX31E and with your knowledge would it then be possible to upgrade that from 128 SSD to 256 SSD? ;-) Thanks in advance mate...
Claus Sørensen (sorry for month late response) Yes - it is possible, you will need to find a correct SSD and than reinstall all programs on the new one.
Where is the ssd in this laptop???
Asus ux31a screen fits to Asus ux31e ?
Can cpu be removed from the board?
Is it possible to upgrade the ram to 16GB or 8GB?
Hola el display de mi “ASUS ux31e” se encuentra estrellado .. alguien sabe donde puedo conseguir la pieza? AYUDA
Hi @regazzz my UX31e's sandisk 256 ssd is pretty slow and has a few bad sectors can you recommend another brand of ssd that can fit our laptop? Thanks
vfideles84 Hello, I don't have any particular suggestion. If I would be you - I would Googleit and find a best possible solution.
is it possible to upgrade the ram ?
HI WHERE IS THE RAM ?
Soldered to the main board. Can't be removed or replaced without a soldering iron, if even then.
Is the LCD connector from UX31E compatible with one from UX31A? I'm asking becasue the TN display in UX31E is just horrible and I wanted to repalce it with UX31A's one.
Iscandelt I would assume that connector will be the same.
+Iscandelt did you replace it? what where your findings?
I didn't I mean I assumed that there is no point to replace it and I switched to UX501 with Skylake CPU.
Bagaimana cara mengetahui jalur VGA di motherboard Asus UX-31e ?
pkai hdmi mini ja om
Sudah saya coba dari HDMI laptop ke televisi, tetapi tetap tidak terbaca di televisi. Apakah ada cara yang lainnya, misalnya dari laptop yang satu ke laptop yang lainnya melalui USB, HDMI, dan lain-lain ?.
RULE NUMBER ONE !!!!!!!!!!!!!!
YOU HAVE TO TAKE OUT YOUR METAL OBJECTS, LIKE A RING, BEFORE WORKING WITH ELECTRONICS !!!!!!!!!!!!!!!
+Jose hernandez Rule number two. If you write with CAPS - means you are talking loud. Are you? Why?
I never had any issues with my ring and electronics I am working with.
+regazzz
Think about this.
Do you need to receive an electric shock ?
Or make a shortcut ?
+Jose hernandez thanks for the input
+regazzz
Intelligent guy
you are wellcome
Are you electronic tech? I'm sure you are not. Thats boulshit he can put rings metal as much as he want nothing will happen. Great video thx
Where is the RAM?
underneath the SSD. It's an on-board type so you can't replace it. That's a bad thing
does anyone know what size screws are used on the base? are they m2x2mm
thanks
+Peter Barker I still have this laptop. Later can check for you if you still need it.
+regazzz that would be really kind of you,i appreciate your help, many thanks
pete
T5
t5 is the drive but does anyone know what the thread width and length is on that laptop? thanks
Ah gotcha. My mistake.
I know getting paid is something important but when your sponsors ad blocks the presentation and doesn't show what you are doing - I move on
+Dan Vink if you don't like ads, use adblocker. And you can simply donate some $$ if video is helpful.
This ads before the video aren't my sponsors. It is ads placed by RUclips because I allowed so and yes I am getting paid like that. Some ads are 15 sec unskipable. Some ads you can skip after 4 sec. Also pop-up banner can be closed. That's how RUclips works for a while. And btw. if you move on to another video and will not watch my and commercial before video, I will not earn a few cents, oh well.
I appreciate the polite answer - when I find a video useful, I do donate and I also pass it on to my co-workers. If those popups are out of your control - that is one thing. For instructional videos, having ads block the content is just a waste of time for viewers and if that is out of your control - I would look at the video - the ad placement and adjust the viewing area so that the information gets across to the viewer.