Здравствуйте. Я взял ваши чертежи за основу и повторил устройство. Спасибо вам! Небольшое изменение сделал в опоре, на которую ложится регулируемая по наклону доска. Вместо одной криволинейной опоры, расположенной по центру под доской я сделал две и расположил их по краям доски. Как мне кажется, таким образом я исключил возможные перекосы доски, когда на ней будет лежать обрабатываемая заготовка. Станок работает отлично, успехов вам в творчестве!
Oh, yeah. My next project. This video is a kind of template of how to make a video! I wish more RUclips woodworker who post long-winded Pfaff would see this and have a lightbulb moment. Very well done, GreenSaw.
Couple of suggestions. Firstly, leave a slight gap between the wrappings around the drum to avoid them riding over each other and creating a bump. Secondly, when sanding a board that has a cup, put the cup-side down to avoid it rocking as you put it through. This makes it quicker to get a level face and reduces the number of passes needed. Great build though.
что скажешь-умно,бюджетно и просто -но свои функции выполняет-молодец! кстати глядя на это всё подумал если снизу на столик поставить пружину попутно будет ещё круче,так как пружина будет поджимать столик к барабану с определённым усилием ,просто рацуха попутно
Additional advice... during the process of making your cylinder true, an easy way to finish the process is to take a good known piece of flat stock and apply a sheet of rough grit sandpaper to it. Hold it against the bottom plate and repeatedly run it from side to side as you tighten your tolerances up. Another nice feature you could add would be to swap out your cylinder system for one that uses replaceable drums. This way, you just need one set of bearings and you can swap out the drum that is installed on the bearings easily. This would allow you to make spare drums to swap out at will, keeping an extra of your most often used grit on hand along with fine grits for when you want to have a more finely finished surface.
This is brilliant really much like the method to get it done.im gonna put this on my next projet build since it does not required any welding at all n i hate it when it needs weld because im sucks in welding parts...
I really liked this project. Very well prepared and explained in detail. I thank you for sharing video and PDF, because I know that many would like to do work even if as a hobby, but for different reasons, they cannot purchase such equipment, but with this project, they can produce it and start developing their own works. May God bless you for your generosity, with many achievements in your work. Hugs.
@@GreenSaw You're welcome. My comment was a form of recognition for your great work and an incentive for you to continue dedicating yourself even more.
Excellent build. I like simplicity and yours is very simple to build. I appreciate all the tools and equipment you have made for yourself. In today's world, there are not many who know how to do it themselves. We need more trade schools.
I'll give you mad props on your effort. But so many things are going to go wrong with this in time. Esp. When it comes to the motor and pulley system. Good luck with that.
A good sharp hand plane may do the trick for those pieces shown, but what would you do for such small pieces that happen to be wood burl or gnarled and knotted wood? A hand plane will likely chip bits of wood fiber out with every pass, no matter how sharp you make that blade or which direction you approach the work from. The surfacing drum sander is a feasible way to approach this issue and achieve acceptable results with a minimum of time and effort invested.
@@gregoryhalye8907 There is a time and place for a planer and a time and place for a sander. I see General Zugs' point, but every tool has its purpose. I do as much metal work as wood work and I have found that in most applications for metal a drum sander is as good as a surface grinder unless you need a precision grind. I always enjoy homemade tools.
Пропущен момент, каким образом извлекается барабан для крепления наждачки. Неужели раму частично разбирать? Так там же некоторые узлы на клей посажены. Посадка подшипника на подмотку из проволоки и эпоксидку совсем не внушает. Биение на валу невооружённым взглядом заметно. После оцилиндровки барабана жуткий дисбаланс должен получится. Удивлён, что только шкив на валу болтается, но это биение компенсируется упругостью ремня. Сам барабан ровненько крутится, станок не скачет по столу. Повезло, наверное. :) А так, вполне годная конструкция. Дословно копировать не буду, но исполнение некоторых узлов возьму себе на заметку. Видео это плюсанул. В закладки себе сохранил. Сейчас пойду посмотрю другие видосики Автора. Если такие же интересные, пожалуй даже подпишусь. )))
крепление барабана - самый непродуманный момент этой конструкции. Каждая смена наждачки - растягивание опор в разные стороны, чтобы его вытащить. Можно, конечно ее по месту менять, но как-то не камильфо, на мой вкус.
@@kentavr68 Друзья, не надо вытаскивать барабан для закрепления наждачки. Я повторил конструкцию, наждачка легко закрепляется по месту. Кстати, очень хорошо крепить на двухсторонней тонкой липкой ленте. По краям барабана налепил по обороту такой ленты, а на нее и барабан потом навиваешь наждачку. Держит отлично и никаких шурупов не надо. Наждачку поставил 80 grid.
ao colocar o veio de rolos,negativo desse jeito teve de forcar os após desse mesmo veio talvez, tivesse ficado um para montar o veio junto sem que forcasse, a ideia em si junta é fantástica. apenas esse reparo no exame nao era valido. De qualquer forma esta de Parabéns. espero que apresente muito mais projectos, Fico agradecido, Festas Felizes, Próspero 2021 de saúde, sorte e felicidades para si e Família.
Dont be fooled by how "safe" it seems to work without those sharp planer blades. If you put a workpiece in the wrong side, it can grab it and fling it out the other side with high speed... it can try to do the same with your arm, too! Please always exercise caution in any DIY home build and know what you are getting into before you start. I like how he incorporated a dust collection system and at least a partial guard for that exposed belt. I do not like how the first part of the build made me think he was going to feed the work into the drum from the front of the grinder, as that would have "grabbed" the work pieces and flung them away. Feeding the drum from the back constantly makes it push back towards the operator, but it should always be under that operator's control. (This is mostly just general advice to all, not directed at you. Cheers!)
ein kleiner Tipp von mir, für die runden Teile, einfach eine Bohrkrone aus dem Elektro Bereich nehmen, sind 68mm Durchmesser und garantiert rund, ansonsten, für den Heimwerker brauchbar
Muito bom trabalho. Como sugestão, na próxima vez, faça o rolo com uma peça de madeira quadrada e arredonde no local, como vc fez para ajustar as arruelas de madeira.
Complimenti vivissimi per la bella realizzazione. Volevo sapere il centro del foro da 28/42 mm per alloggiare i cuscinetti del rullo a che distanza sono dalla parte superiore? Dallo schema non riesco a capirlo. Grazie.
Dear friend, I did not understand something. At 5:58 (and 6:28 - 6:34), your rolling bearings are tucked into the wooden sides and protected with three screws each. Now comes the surprise: at 6:57 (and 7:12 - 17:46) your rolling bearings are threaded on both ends of the shaft. What is true: first or second?
Thank you for the good question. You're right, there's a contradiction. First I thought of applying the first method, but then I gave up. Please forgive me for this. The second method is correct. Congratulations on your attention. :) Best Regards.
Wow!! This was in my recommended videos glad I clicked on it...... Only bad thing is now I will be watching your previous videos all day today 🤣🤣🤣 SUBBED!!
merhaba. güzel fikir. kullanışlı ve işe yarar güzel bir alet oldu. Biraz daha büyük ve güçlü motorlusu yapıldığında çok çok işe yarayacaktır. tebrik ederim. paylaşım için teşekkürler. selamlar..
يا حبذا لو الشرح كتابة للتوضيح اكثر وبالذات المواتير المستخدمة ما قدرتها بالوات والامبير وما هي قوة الشاحن الكهربائي وصفاته الذي سيتم تشغيل تلك الموتورات وشكرا
Quero parabeniza-lo e agradecer pelo seu belo trabalho, boa vontade, acima de tudo em compartilhar seus conhecimentos em marcenaria ... pra falar a verdade chega a dar “raiva” pra não dizer inveja com que facilidade e precisão vc os desenvolve! Estou preparando o material para tentar construir a lixadeira e notei que nas peças que constituem as duas laterais onde será fixado o tambor, apesar da clareza das dimensões de seu projeto disponibilizado em pdf , não consegui identificar a distancia do furo onde será instalado o eixo do tambor em relação ao topo daquela peça - tem apenas a informação da distancia da lateral esquerda tomada de sua aresta esquerda ao centro do furo mas não encontrei a cota que determina o espaçamento do centro ao topo da mesma. É possível informa-la? Grato e parabéns pelo seu canal. I congratulate you and thank you for your beautiful work, goodwill, above all in sharing your knowledge in woodworking ... to tell the truth comes to give "anger" not to say envy how easily and accurately you develop them! I am preparing the material to try to build the sander and I noticed that in the parts that constitute the two sides where the drum will be fixed, despite the clarity of the dimensions of his project available in pdf, I could not identify the distance of the hole where the shaft will be installed. drum with respect to the top of that piece - it only has the left side distance information taken from its left edge to the center of the hole but I did not find the dimension that determines the center to top spacing of the hole. Is it possible to inform her? Grateful and congratulations on your channel.
Corrections :
at 0:17 Ø=8cm
at 0:06 Title : Bench Grinder Powered - DRUM SANDER
I like your technics so easy clearly safety I appreciate your idea 🇹🇭
@@sitthirat Thank you for your comment.
@@sitthirat llllllllllllllllllllllllllllllll
COOL
Hola
Здравствуйте. Я взял ваши чертежи за основу и повторил устройство. Спасибо вам! Небольшое изменение сделал в опоре, на которую ложится регулируемая по наклону доска. Вместо одной криволинейной опоры, расположенной по центру под доской я сделал две и расположил их по краям доски. Как мне кажется, таким образом я исключил возможные перекосы доски, когда на ней будет лежать обрабатываемая заготовка. Станок работает отлично, успехов вам в творчестве!
This is an excellent design and I especially like your mechanism for height adjustment - thank you for sharing.
You are unbelievable. I´m build my own workshop and with your video i can add another great machine. Big thanks for your work!!!
Thank you for your nice comment. Good luck with your new workshop.
Ide luarbiasa, hasil menakjubkan 👍 (Indonesian)
Oh, yeah. My next project. This video is a kind of template of how to make a video! I wish more RUclips woodworker who post long-winded Pfaff would see this and have a lightbulb moment. Very well done, GreenSaw.
Couple of suggestions. Firstly, leave a slight gap between the wrappings around the drum to avoid them riding over each other and creating a bump. Secondly, when sanding a board that has a cup, put the cup-side down to avoid it rocking as you put it through. This makes it quicker to get a level face and reduces the number of passes needed. Great build though.
Do not pay attention on dislikes...very good job !
Thank you Sir...
ho apprezzato molto il suo lavoro per la tecnica e la classe che infonde nel suo progetto Grazie
Sono felice che ti piaccia. Grazie.
что скажешь-умно,бюджетно и просто -но свои функции выполняет-молодец! кстати глядя на это всё подумал если снизу на столик поставить пружину попутно будет ещё круче,так как пружина будет поджимать столик к барабану с определённым усилием ,просто рацуха попутно
Не совсем... тогда будет сложнее выставить толщину заготовки... Ну и настройку положение стола - лучше 2 по бокам, чем 1 в центре.
Additional advice... during the process of making your cylinder true, an easy way to finish the process is to take a good known piece of flat stock and apply a sheet of rough grit sandpaper to it. Hold it against the bottom plate and repeatedly run it from side to side as you tighten your tolerances up.
Another nice feature you could add would be to swap out your cylinder system for one that uses replaceable drums. This way, you just need one set of bearings and you can swap out the drum that is installed on the bearings easily. This would allow you to make spare drums to swap out at will, keeping an extra of your most often used grit on hand along with fine grits for when you want to have a more finely finished surface.
Thank you for your advice.
This is brilliant really much like the method to get it done.im gonna put this on my next projet build since it does not required any welding at all n i hate it when it needs weld because im sucks in welding parts...
I really liked this project. Very well prepared and explained in detail. I thank you for sharing video and PDF, because I know that many would like to do work even if as a hobby, but for different reasons, they cannot purchase such equipment, but with this project, they can produce it and start developing their own works. May God bless you for your generosity, with many achievements in your work. Hugs.
Thank you for your nice comment.
@@GreenSaw You're welcome. My comment was a form of recognition for your great work and an incentive for you to continue dedicating yourself even more.
Excellent for miniature projects. Sorts of load conveyer is better added. 👍👍👍👍
amazing DIY jig…thanks for pdf 👍
Excellent build
Excellent build. I like simplicity and yours is very simple to build. I appreciate all the tools and equipment you have made for yourself. In today's world, there are not many who know how to do it themselves. We need more trade schools.
It just what I was looking for
Estou pretendendo fazer uma igualzinha!
lindo projeto gostei poderia me passar as medidas e o que você está usando e um esmeriu
Very nice idea
I'll give you mad props on your effort. But so many things are going to go wrong with this in time. Esp. When it comes to the motor and pulley system. Good luck with that.
This looks like what I am looking for
Fácil y práctico, buen proyecto...te felicito amigo, mis saludos desde Perú
Me alegro de que te guste. Atentamente.
It's very good and accurately
ΠΟΛΥ ΚΑΛΗ ΦΘΗΝΗ ΚΑΙ ΕΥΚΟΛΗ ΚΑΤΑΣΚΕΥΗ
Black Knight is at it again 🙂
Chou de bola. Vou tentar fazer uma dessa
Nice music oh and nice wee sander too 👍
Glen Fiddich
simple , but very good
Nice 😊👍👍☕🤝🤝🇮🇩
Harika bir kendin yap projesi, ellerinize sağlık. Sizi daha yeni keşfettim. Takipteyim.
Teşekkür ederim Olcay Bey, Saygılarımla.
buena noche muy buena su idea y bastante facil de hacer mi pregunta con ese motor cual es el lijado maximo que realiza gracias
Great build, thanks for sharing
I'm glad you like it, thank you for your comment.
wow
great built. I love it.
small unit with limited options yet it gives out 100%. Congrats !
Thank you!
Fantástico projeto,vou ver se faço o meu
Parabéns amigo
Deus abençoe
Отличный станок.Тоже такой делаю, механизм регулировки применю на своём станке.Спасибо за подсказку.
Nice Made! From Belgium 🇧🇪
Excellent new idea
Very nice project 👍
Merci beaucoup pour la vidéo
It's alright build on a budget, but for small pieces like shown it seems faster with a sharp hand plane to me and less dust.
A good sharp hand plane may do the trick for those pieces shown, but what would you do for such small pieces that happen to be wood burl or gnarled and knotted wood? A hand plane will likely chip bits of wood fiber out with every pass, no matter how sharp you make that blade or which direction you approach the work from. The surfacing drum sander is a feasible way to approach this issue and achieve acceptable results with a minimum of time and effort invested.
@@gregoryhalye8907 There is a time and place for a planer and a time and place for a sander. I see General Zugs' point, but every tool has its purpose. I do as much metal work as wood work and I have found that in most applications for metal a drum sander is as good as a surface grinder unless you need a precision grind. I always enjoy homemade tools.
This sander can smooth other materials than wood too! Metal, plastic etc.
I am going to agree with you , he should have made it for a bigger piece. You bring a very important of the dust, I couldn’t agree more.Good point.
Ingenious, well done, thanks for the video.
I am very glad that you like it. Thank you for watching and commenting.
Get yourself a circle cutter to use in the drill press. Leaves you with a perfectly centered hole also. Save some time and steps. Clever rig !
Thank you for your advice.
How 475 can dislike this video is beyond imagination. Great job.
Beats me I'm 85yr old woman and I loved it
Пропущен момент, каким образом извлекается барабан для крепления наждачки. Неужели раму частично разбирать? Так там же некоторые узлы на клей посажены.
Посадка подшипника на подмотку из проволоки и эпоксидку совсем не внушает. Биение на валу невооружённым взглядом заметно. После оцилиндровки барабана жуткий дисбаланс должен получится. Удивлён, что только шкив на валу болтается, но это биение компенсируется упругостью ремня. Сам барабан ровненько крутится, станок не скачет по столу. Повезло, наверное. :)
А так, вполне годная конструкция. Дословно копировать не буду, но исполнение некоторых узлов возьму себе на заметку.
Видео это плюсанул. В закладки себе сохранил. Сейчас пойду посмотрю другие видосики Автора. Если такие же интересные, пожалуй даже подпишусь. )))
крепление барабана - самый непродуманный момент этой конструкции. Каждая смена наждачки - растягивание опор в разные стороны, чтобы его вытащить. Можно, конечно ее по месту менять, но как-то не камильфо, на мой вкус.
@@kentavr68 Друзья, не надо вытаскивать барабан для закрепления наждачки. Я повторил конструкцию, наждачка легко закрепляется по месту. Кстати, очень хорошо крепить на двухсторонней тонкой липкой ленте. По краям барабана налепил по обороту такой ленты, а на нее и барабан потом навиваешь наждачку. Держит отлично и никаких шурупов не надо. Наждачку поставил 80 grid.
That’s pretty darn slick
ao colocar o veio de rolos,negativo desse jeito teve de forcar os após desse mesmo veio talvez, tivesse ficado um para montar o veio junto sem que forcasse, a ideia em si junta é fantástica. apenas esse reparo no exame nao era valido. De qualquer forma esta de Parabéns. espero que apresente muito mais projectos, Fico agradecido, Festas Felizes, Próspero 2021 de saúde, sorte e felicidades para si e Família.
buenisimo el modelo,yo lo hice con una maquina de escribir que ya tenia el rodillo puesto me falto el extractor de polvo
Nice tool!
You could put a disc sander on the end, possibly.
Going to be making one of these, saw a few things I have to change, but this is far safer than a thickness planer or joiner.
Dont be fooled by how "safe" it seems to work without those sharp planer blades. If you put a workpiece in the wrong side, it can grab it and fling it out the other side with high speed... it can try to do the same with your arm, too! Please always exercise caution in any DIY home build and know what you are getting into before you start.
I like how he incorporated a dust collection system and at least a partial guard for that exposed belt. I do not like how the first part of the build made me think he was going to feed the work into the drum from the front of the grinder, as that would have "grabbed" the work pieces and flung them away. Feeding the drum from the back constantly makes it push back towards the operator, but it should always be under that operator's control. (This is mostly just general advice to all, not directed at you. Cheers!)
Looks simple but is very effective, simple and clear and is very good job! thank you for sharing :)
ein kleiner Tipp von mir, für die runden Teile, einfach eine Bohrkrone aus dem Elektro Bereich nehmen, sind 68mm Durchmesser und garantiert rund, ansonsten, für den Heimwerker brauchbar
Vielen Dank Habe ich schon.
Muy buena pedagogía excelente Venezuela
Muito bom trabalho. Como sugestão, na próxima vez, faça o rolo com uma peça de madeira quadrada e arredonde no local, como vc fez para ajustar as arruelas de madeira.
Your the man killer build ,ive been on a drum sander kick for a month trying to figur new ways to use drum sanders very nice .
Получилось просто класс!
Oi, gostei da sua idéia. Mas teve dificuldade para anexar o rolo .
Cool sander
Aferin! Altın ellerin var. Devam et !!!
Its very good project and simple I would lke to get the dimencions
You can download a PDF, go to www.greensawdiy.com/drum-thickness-sander-pdf-download.html
I'm curious why you didn't use a hole saw for the MDF discs?
👏👏👏
вариант когда разобьётся посадочное под саморез держащий ленту уже продумывается?
Wouldn't using a hole saw in your pillar drill have made making the round parts much simpler (and smoother)?
You beat me to it. Exactly what i was gonna say.
you will have a better looking circles, but you will not avoid rounding the drum 11:23
MDF with drill is not easy to cut but can still be done
Maybe he didn't have a hole saw that size? Never know
It is possible to cut the circle in many ways. That's what I did this time. Mortern & maker202 are right ..
Çok basit ama bir o kadar mükemmel.. Elinize ve emeğinize sağlık, teşekkürler, kolaylıklar..
Yorumunuz için teşekkür ederim.
Best RUclips music.
best invention
Bonjour,
C'est vraiment top et facile à réaliser. Merci pour cette vidéo, à bientôt pour de nouvelles aventures.
Bonjour,
Je suis content que ça te plaise. S'il vous plaît suivre.
Very nice build and video !!
In my small shop space is always an consideration so I would prefer the motor below the sander to cut down on the width.
Idea genial para que lostrabajos tengan un fino acabado. Gracias por compartir esta idea de la lijadora de tambor.
Complimenti vivissimi per la bella realizzazione. Volevo sapere il centro del foro da 28/42 mm per alloggiare i cuscinetti del rullo a che distanza sono dalla parte superiore? Dallo schema non riesco a capirlo. Grazie.
very good congratulation
Glad you like it, thank you.
Great job......very nice work
Thank you.
Very good. My understanding is that sanders should run at a slower speed, you might change the pulley sizes. Keep up the innovation !!
Thank you for your advice.
Dear friend, I did not understand something. At 5:58 (and 6:28 - 6:34), your rolling bearings are tucked into the wooden sides and protected with three screws each. Now comes the surprise: at 6:57 (and 7:12 - 17:46) your rolling bearings are threaded on both ends of the shaft. What is true: first or second?
Thank you for the good question. You're right, there's a contradiction. First I thought of applying the first method, but then I gave up. Please forgive me for this. The second method is correct.
Congratulations on your attention. :)
Best Regards.
@@GreenSaw It is okay. Your build is very nice. I'll try it too. Thanks for the idea. Greetings from Serbia.
Você é muito caprichoso! Dedicado. Parabéns.
INTERESANTE EL PROTOTIPO, MUY INESTABLE LA PARTE DE LOS RODAMIENTOS, PERO SE PUEDE MEJORAR UTILIZANDO OTRO MATERIAL, EN SI ES BUENA LA IDEA....
Excelente sistema de elevação, parabéns. Saudações brasileiras.
Obrigado.
verdade kkkkk
Wow!! This was in my recommended videos glad I clicked on it...... Only bad thing is now I will be watching your previous videos all day today 🤣🤣🤣 SUBBED!!
Thank you. Watch other videos, you won't regret it. :)
Boa noite meu amigo ,por gentileza pode me passar a marca dessa serra de fita , será que consigo comprar uma dessa aqui em São Paulo?
Por quanto me ficaria uma encomenda destas par meu uso.obrigado.
Super Video 👍
merhaba. güzel fikir. kullanışlı ve işe yarar güzel bir alet oldu. Biraz daha büyük ve güçlü motorlusu yapıldığında çok çok işe yarayacaktır. tebrik ederim. paylaşım için teşekkürler. selamlar..
Belki de daha büyüğünü sizin kanalda görürüz. :) Teşekkürler.
@@GreenSaw aslında ihtiaçım var. kısmet birgün o modda olursak inşallah yaparız. :-)))
Looks very nice! Feel free to embed this video on our homemade tools forum; our guys would love it.
how this fit with proposed charges for embeding youtube videos on HMT?
Ottima più della mia ...... Bravo
يا حبذا لو الشرح كتابة للتوضيح اكثر وبالذات المواتير المستخدمة ما قدرتها بالوات والامبير وما هي قوة الشاحن الكهربائي وصفاته الذي سيتم تشغيل تلك الموتورات وشكرا
Great job, but I think a hole saw would be quicker than cutting all those discs on the bandsaw.
Çok güzel bir çalışma olmuş teşekkür ederim
j aimerais savoir si le pieces de bois penetre dans le meme sense de rotation du cilindre...merci beaucoup pour la repnse
Quero parabeniza-lo e agradecer pelo seu belo trabalho, boa vontade, acima de tudo em compartilhar seus conhecimentos em marcenaria ... pra falar a verdade chega a dar “raiva” pra não dizer inveja com que facilidade e precisão vc os desenvolve! Estou preparando o material para tentar construir a lixadeira e notei que nas peças que constituem as duas laterais onde será fixado o tambor, apesar da clareza das dimensões de seu projeto disponibilizado em pdf , não consegui identificar a distancia do furo onde será instalado o eixo do tambor em relação ao topo daquela peça - tem apenas a informação da distancia da lateral esquerda tomada de sua aresta esquerda ao centro do furo mas não encontrei a cota que determina o espaçamento do centro ao topo da mesma. É possível informa-la? Grato e parabéns pelo seu canal.
I congratulate you and thank you for your beautiful work, goodwill, above all in sharing your knowledge in woodworking ... to tell the truth comes to give "anger" not to say envy how easily and accurately you develop them! I am preparing the material to try to build the sander and I noticed that in the parts that constitute the two sides where the drum will be fixed, despite the clarity of the dimensions of his project available in pdf, I could not identify the distance of the hole where the shaft will be installed. drum with respect to the top of that piece - it only has the left side distance information taken from its left edge to the center of the hole but I did not find the dimension that determines the center to top spacing of the hole. Is it possible to inform her? Grateful and congratulations on your channel.
Hello, thank you for your comment. The distance you ask, it doesn't matter. The top cover must not rub against the drum. 45 mm is suitable.
Lindo trabajo...felicitaciones.
Amazing ❤❤
Excelente trabajo con excelente infraestructura también. Felicidades y gracias por compartir. Saludos cordiales desde Quito Ecuador. Bendiciones.
Yes, it is possible.
Very nice. Well done!
Thank you.
small n simple design, so easy to build
Takipteyim sıkıntı yok.. Bildirim aldığımda heyecan yapıyorum.. Paylaşım için Teşekkür ederim.
Ben de böyle güzel yorumlar okuyunca mutlu oluyorum. Teşekkür ederim. PDF eklendi...
интересный вариант привода от точила
Muito bom o vídeo bem explicativo, só uma dica NUNCA USE LUVAS EM MAQUINAS rotativas e serras.
Nice n perfect