Definitely love the videos. Try to put in time stamps 🙏🏼. The reason why is, that if the people want information or tips. They can go to the time stamp. The time stamp indicates what u doing and so on. Like what tool u can use to remove the filler plug and so on. That would really help so many people 😁🙌🏼🙏🏼🔥❤️
Thanks for the video..i got 2nd gand box from someone we installed in with new seals and ..a week after o noticed huge leak pushrod damaged the gold metal..then metal damaged small seal..then we installed it again another leak on right side flange..where there's a green thing i am not sure we damaged the seal while trying to install or not cos it was fine before. Put a new seal while its on the car still leaking especially when driving..
Loving all these videos. Great to see your dad helping you along with this project. Maybe your next project will be a vura motor in the Fox.😜🎉 Keep going strong. Fam watching all the way from Auckland NZ.
I just want to find out. I have an FFZ gearbox and I just want to find out should both cups that the inner cv’s bolt onto turn together? Or should they turn independently?
I have a challenge with my transmission. It only wants to go i. First gear some times not all the time when needed so i am forcd to put 2nd whe. Taking off. My gear links were replaced as wel as the clutch plate someonne sugestdd that it could be my gear box mounting not allowing the pin to select first gear sometimes
28 minute video love to see it bro ❤🎉
Really enjoy your clear verbal explanation and detailed steps using the normal mans tools, no fancy special stuff. Awesome presentation
Hi can the D tent be purchase separately ?
Definitely love the videos. Try to put in time stamps 🙏🏼. The reason why is, that if the people want information or tips. They can go to the time stamp. The time stamp indicates what u doing and so on. Like what tool u can use to remove the filler plug and so on. That would really help so many people 😁🙌🏼🙏🏼🔥❤️
Will definitely do so
Video length is proper! Raw masterclass footage ✊💪👏
Appreciate it!! A lot more to come
Thanks for the video..i got 2nd gand box from someone we installed in with new seals and ..a week after o noticed huge leak pushrod damaged the gold metal..then metal damaged small seal..then we installed it again another leak on right side flange..where there's a green thing i am not sure we damaged the seal while trying to install or not cos it was fine before. Put a new seal while its on the car still leaking especially when driving..
Loving all these videos. Great to see your dad helping you along with this project. Maybe your next project will be a vura motor in the Fox.😜🎉 Keep going strong. Fam watching all the way from Auckland NZ.
Thanks, the vr6 build is a plan for far in the future 😂. Thank you for watching 👍
30 mins is awesome, great content keep up the good work
Thank you much appreciated
This actually brought me into some light , I have the same problem
Brother that detent bolt/screw , where'd you buy it
I just want to find out. I have an FFZ gearbox and I just want to find out should both cups that the inner cv’s bolt onto turn together? Or should they turn independently?
Really enjoying this series. Love how the box came out, I almost feel like I can't wait to drive the car 😅
Thanks I'm also glad with how the box finished off. Can't wait to get the car on the road
@LMManuel ja take us for a ride de lani
Can't wait for the next videos..enjoyed this on a lot..its great to see the challenges you face,& those little tips you give us are very helpful
Glad you like them!
I have a challenge with my transmission. It only wants to go i. First gear some times not all the time when needed so i am forcd to put 2nd whe. Taking off. My gear links were replaced as wel as the clutch plate someonne sugestdd that it could be my gear box mounting not allowing the pin to select first gear sometimes
Hi bro saw ur video tanks so much have problem wit my mk1 golf it grinding in reverse but going take 2 what can b worn i change it from.5 to 4 speed
Does a nissan a 1400 also have a detent?
Howsit. Im struggling to get the selector shaft oil seal and boot for my ffz gearbox. Any advice?
I cant get the ball from the detent nut out if ny gearbox
Baie mooi, Now i learned a lot from you guys. Ive got a FFZ gearbox on my 2L 8valve and now i know how to do those seals thanks a lot bro!
Glad to help!
Thanks bro@@LMManuel
I've just learned to put a gearbox oil seal from your video thanks for the tips
Glad we could help
Can I have your contact please
How do u swt linkage on it
I enjoyed every moment. I wish u were in Namibia so I could send u my gearbox for refurbishment
19:17 I put a lot of sealer🤣🤦🏻
😂😂 you know for sure it's not coming off
@@LMManuel yha it won't pop of unless forced 🤣
Great job, looks incredible! id leave that gearbox original since it looks so good
5:10 what is size of the spanner
It's a 24
@@LMManuel5:10 okay And what is the size of modified nut used to unscrew
in the hole there is a small brass bushing while the gearbox is out also replace that.
Well spoken ,and much informative by detail.
Great video my bru,actually might have figure out the issue with my gearbox by watch this🙏🏼
Thanks man! Hopefully it will help
What kind bra. I got to shake down a caddy 5 speed box , Passenger side sideshft pulled out
Nice content boet. I really enjoyed and learned a lot from this. Subbed!
Thanks man really appreciate it
Howzit bro , where do I get that detent ball for the gearbox?
Try goldwagen they should see it
I am loving the longer videos
I'm glad brother
defs enjoying this channel, we need a timing video please.
earned my subcription
Coming up soon
These are awesome cant wait for the next video
Glad you like them! A lot more videos to come
thanks am learning a lot
Can wait for the next video bro...🔥
Coming soon...
Top video bro...longer is better
Thanks man!
💯
WHEEL BOLT 🔥
The video is right and not long
the length of the vid is good
Thank you!
👌👍
👍 kwaai man
Detent 😂
😂
Well spoken ,and much informative by detail.