Why SCR can't expand... and how Farleigh fixes that
HTML-код
- Опубликовано: 1 авг 2024
- Bit of explanation about how the game works, bit of speculation, and a few overall ideas about WaterLine; bit of a convoluted video but it all joins together in its own unusual way. Hope you enjoy!
Music:
The Process by LAKEY INSPIRED
• LAKEY INSPIRED - The P...
Never Stop (instrumental) by Joakim Karud
• Never Stop (instrument...
Discord / discord
Roblox www.roblox.com/users/47083625...
Twitter / dwelleruk 
Игры
I need to correct myself about why low framerate happens with the large map in SCR specifically - thanks to all those who have pointed this out.
You don't really have to download the whole map when loading into the game - SCR uses StreamingEnabled, meaning only the area you are in is loaded for you, significantly reducing the number of parts being viewed and reducing occurrences of low framerate. However, what makes the size of the map cause low framerate is a floating point precision problem - in simple terms, positions of parts are located based on the world origin at Berrily, and Roblox can struggle to handle calculating position numbers of parts which are quite far away from the origin. This, in turn, causes higher CPU usage and makes the game run slower.
Essentially, they can't expand because they can't make the world go too far away from Berrily (the origin), but they can fill in the gaps and make use of what they have.
Okay. Good to know.
thats why people like berrily?
@@mudchute4dlr nah
@@DwellerUK oh
Can they just scale the map down so the parts aren’t so far away from the origin
My theory is that Farleigh replaces the part of the port Benton loop as you can see the curve at end
If I have interpreted your theory correctly, you think that some WL trains will terminate at PB then loop back?
@@DrElsemere no it'll curve off port Benton and then terminate at Farleigh via the loop that connect uses
@@revkingracing84 it could be a great idea
Well that age worse than milk
I dont think Waterline goes through the port benton loop :/
"that would mean there would be 3 termini in a row which is very unrealistic"
SCR: *laughs in Leighton Stepford Road, Leighton City, Leighton West and Edgemead*
for optimization the developers can just load and unload areas of the map that the player or players are in this will greatly reduce the lag allowing a greater map size
However this doesn't work due to Roblox physics and graphics, you see, full graphics loads the ENTIRE map and 9 loads most of it and so on going down
@@pacermanthefan yet if you look around you can see the map being loaded in and unloaded
@@elixar844 because of the roblox graphics SCR does not have a fancy thing that some games have
that can work since ERLC did that.
@@Boypogikami132 `Streaming enabled does work but often doesn't if you move to fast so it would work but sometimes doesn't
4:22 I present to you:
-terminus at LSR
-terminus at LC
-terminus at leighton west
-terminus at edgemead
The best thing with 1.9,1.8 and 1.7 is that updating said areas or branches actually made the game less laggy so that was interesting.
There was one thing I had to disagree with, if SCR still exists in 5-10 years technology would of improved so much most devices would e able to handle a laggy SCR V1.6
I hope they expand the map cause it's still a bit small though being one of the biggest maps, but considering it is a train simulator, yeah it's a bit small
3:37 As a Mancunian, I can say that I am annoyed they got the layout of the station based on Manchester Airport inacurrately.
I'd like to offer my insight here. We use a built in Roblox system called StreamingEnabled, which allows the client to stream in and out different parts of the map, in turn reducing lag significantly. Therefore, the size of the map doesn't really matter anymore, and the only reason we are bringing a close to map expansions and new stations is so we can focus on other things, such as upgrading current scenery. Hope this helps.
Last time I checked, streaming enabled is in the SCR in game settings
The only issue SCR will eventually see is the floating point errors if expansion goes too far from 0, 0, 0
I don't think there's any intention to go quite that far enough out to cause those issues anyways though
The StreamingEnabled has an engine related issue, particularly when they are combined of custom ReplicationFocus and StreamingEnabled which causes the servers to suffer severe degradation of performance and ultimately freezes entirely, which exists since 2018 and IDK if Roblox fixed that issue
@@tenny_tenten My guess is that this issue has been solved. Reason for this is because I have not seen a "slow server" warning on the Roblox servers tab for a while now. Plus, Roblox is able to support 700 player servers and not lag (assuming 700 players don't join all at once). The ikea game is a great example of this.
You are correct that StreamingEnabled does require more work from the server, since it needs to constantly send part information to all the clients.
However, I think Roblox server is able to handle this load. What causes lag nowadays is either high ping or slow client
@@YouVidTuber SCR already faces a lot of floating point rounding issues - these start becoming noticeable in rendering at about 8192 studs in each axis. Given the game uses StreamingEnabled, this is by far the most significant boundary to expansion.
This video hyped me so much for 1.10 !! Another great vidéo, thanks a lot Dweller !!
3:56 i thought the same thing (thru and terminus) when the sneak peek dropped last Sunday. I love to hear that we share that opinion
It could become something like mind the gap, which has more than 100 stations but no big gap, like the one south of Morgantown and the gulf of starryloch, and there are many directions to go from isembard, not just two like stepford Central
I think that Farleigh might have a loop in the benton area like the Cathcart circle line in Glasgow, or it's between James Street and Esterfield, although 3 terminuses would be unrealistic but we need more routes for WL don't you think
This aged like milk especialy 4:50, Farleigh is a part of the Esterfield line, and James Street is now limited
There are 4 terminus stations next to each other (LSR, Leighton City and West, and Edgemead)
LSR barely counts since AL needs expansion to LC anyway, west is technically a separate branch and Edge-mead is over a mile away from Leighton but i do get your point
@@AdistuffRBX He meant that there are 4 stations next to each other which are considered the final destination for some routes.
Also no, AirLink does not need to be extended to LC. It is fine in LSR anyway, you can take a Connect from LC to LSR.
@@xczzer literally no point waiting for a connect, it’s kinda unrealistic why AL wouldn’t expand one station anyway
Leighton Stepford isn’t a terminus
@@mudchute4dlr It is mostly a through station but it does have a buffer, although terminal stations don’t define having buffers. They are usually considered the final destination for some routes.
This video made me realize, the reason they probably redid LC is because those City Thameslink platforms had to have had so many parts. I bet that LC was a major source of lag.
Either way new leighton is so much better, but they need to make LC and LW the only terminating stations.
@@Cal90208 Or LSR and LW. After all, what else is the point of Stepford Road?
Maybe the "Estherfield" is Connolly, and Farleigh is that station beyond James Street
But Farliegh isn't a full terminus which means there is a station after it.
@@YorksLancsTransportHub Or there’s a depot past Farleigh and this is the update that we’re allowed to go into depots?
@@Cal90208 there was a station with that depot though
@@YorksLancsTransportHub ?
I think it might be between James Street and Esterfield
My theory is that it dont curve off west Benton and skip Benton because waterline's hub is benton but I think it will be before CSP and after BTN so you can go via CSP or skip CSP (then you rejoin if your going to JS or CNY)
Can't believe the developers made express via MGT in 1.7 Connect Airlink and Express Came To Vote If Airlink Should Go Beyond LSR and express not going through MGT
You clever clever man very good deductions from those terminating clues and all sorts 🙂
Hey Dweller just came back after being down the west coast main line all day but I didn't ride it I just filmed it and started posting since I've came off the Victoria Line and I also went on the Jubilee and Metropolitan Lines
0:13 SOOOOOOO REALISTIC
If they ever want to extend the map, they should do what PTFS has done, I'm pretty sure everything's half the size of normal roblox scale.
I think the Devs need to really work hard on lag fixes and then in a year or so begin slowly expanding. Addition of scenery and occasional stations and they need to fully upgrade the whole map to make the game look as good as it can.
I think the reason the new waterline station has no buffers is becouse there will be a depot behind it
Quite alarge project but: Why not make another Stepford Game? A totally new map, with the similar trains and operators? Wouldn't that work?
I think that Farleigh is before James street and/or maybe that terminating station is James street. Maybe the station beyond James street is in a different update. Maybe Farleigh isn’t a terminating station
i think farliegh is a benton bypass to relieve traffic from benton
it ahs a purpose and its in an already existing zone
Excellent vid
0:57 Well they don't load it all at once, that is why streaming enabled is a thing. Only loading what is needed to be loaded in the world.
well, StreamingEnabled broke SCR
I just came up with a theory, what if it is inbetween James Street and the Esterfield/Unknown Station but it just has 2 platforms for 1 direction and the other platforms cant be seen due to the wall, so its not a terminating station
Makes no sense why they’d need more than two tracks unless they’re gonna shove express in there again.
Guess what - you're right!
- A "future" person
@@scythal Kind of,
Well I’m right that it’s both a terminus and thru station, but it only has 2 platforms 1 is bidirectional and the other is 1 way only
my first theory after seeing this video would be farleigh was a station in-between airport west and central/parkway on waterline
0:28 even when i put my graphics to minimum, i'm laggy.
Fact: There are 13 steps up to the walk corridor at the Berrily Footbridge.
i just got a discord notification for the most recent sneak peak in the SCR discord… while watching this. I don’t know if that’s luck or good timing.
What’s certain about Farleigh is that it’s a terminus station, since the train is facing away from us and is on the right
No, that's not exactly certain though, there doesn't seem to be any markers near the train towards Newry Harbour, so ye. (One possibility could be that Farleigh could be a through station that only sees one-way services, maybe as a potential new route (or 2 new routes) that would begin and end at Newry Harbour and maybe also Newry, while only going to Benton one way then looping back to Faraday Road via the Port Benton loop and passing through Farleigh along the way, and who knows, maybe Coxly Newton could be reopened as a waterline station for the Farleigh trains to call at before joining back on the remainder of Waterline on Faraday Road, maybe even using the rarely used platform 3 before heading back to Newry, not to mention that we might have already seen Coxly Newton in a sneak peek but prob didn't recognize it as such)
@@thecreation3892 Which sneak peek would you guess coxly newton to be in
@@Cal90208 That will be something I'd prefer you to find out by looking at the sneak peeks, it's however not confirmed to be true, just a fun theory though. ;3
@@thecreation3892 I looked, I don’t see anything that I would think is coxly newton which is why I asked you
I agree with this, JSE could be only one stop because of the limitations and yes, it needs alot of optimizations
On the poll on discord, they said only one station after James Street
@@mudchute4dlr Looks like they decided to splurge and give three (Farleigh, Rosedale Village, Esterfield) stations :P
is it just me or in the T2 sneakpeak i can see the airlink shuttle
I cant wait to atualy see the update and bet on our theory's so hopefully 1.10 would be good
I am thinking maybe the waterline will have split extension one branch heading to the new station what's it is going to be called via Farleigh and one branch heading to lsr or sac this is opinion anyways 🤔
possibly, farleigh is in between WB and Benton, pushing WB back creating a new interchange to stop express from being held back by waterline
SCR Logic since v1.2
Odd number updates:network and station upgrades
Even number updates:extensions+odd number updates stuff
I thought farleigh would be before the ester field before the update
help I can't enter the trainings I enter but the page never loads
Rosedale Village (RDV) is a good station for the WL Network
Finally, after a month
NEW Public playlist
What do you mean by "reshuffle"
I have a AMD Ryzen 5 3600 6-Core Processor, 16 Gigabytes of Ram, and a Gtx 1080 Ti Founders edition. I get about over 100+ fps with maxed out graphics, overall I can run the game very easily and smoothly with no stutters. But I do happen to drop the 30 - 40 fps when I move the camera to a certain point of view. I'm not sure if this is normal, or the game is just buggy. I did also overclock my CPU and GPU so that might've helped me just a little bit. Overall the developers of SCR did a fantastic job on their game.
this happens to me too, especially around SC. Absolutely hate it. SC also needs a full revamp because that station is so ugly
*sees the famous "Dweller's Hob Insurance"*
1:07 what's the train used?
I feel like it's no exaggeration to say you are a godsend. I've been making my own soft since i was 14ish and since then it's beco my
they shorld add for the trains to tilt it would be sick doe
Ahh, these speculations... He just said it will not be on the branch to Esterfield. And now, we have Farleigh there.
Looks like someone made a mistake...
And also, it's funny to see their theories.
My theory
T2 Might not actually be a Terminating station, and it might just stay as a Heathrow-loop like design, as in that sneak peak, there isn't really a clear shot of buffers (as there is in the end station.)
Farleigh may be a loop to the north of Benton, going left after Cam St Parkway, and linking back up to the south of Faraday Road or sommin; or it could be a single-station branch that they'll dump Newry Harbour trains down, or possibly both!
i cant belive when the snek pek came out i called it fair-lei not far-lee lol
the CD told me how to pronounce it sooooo yeah lmao
@@DwellerUK I pronounced it far-lei, cuz even tho im bulgarian, American accent is easier for me but yea now i know how to pronounce Farleigh
its ok the community understands Farleigh any way u pronounce that
Farleigh should be pronounced fawlee lol
5:37 I think it will end at sneek peek 10 then the next week it will release instead of #11
Well this did not age well
@@Cal90208 We've only had 10 sneak peeks tho so it could release tomorrow
wait nvm lol
I think it’s a bit like Altrincham
and now we know
What was the name of the laptop? HP 15duxxxx-xxxxx?
1.10 review? (When update drops)
yea
Atleast its less laggier than grand continental railways
The station on the picture looks like streatham
pretty sure Farleigh is based on Surrey Quays
Even with this I will still love the game
The best thing that can happen to SCR is that roblox offers to load the games on its servers and transfer the data to the player. This way we would gain a lot of margin, and the network expansions could continue
Very nice video, likes from me
Nice video
Bruh I just made a video on this topic but it doesn’t come out until Sunday people are gonna call me a dweller copy
Are you still streaming
I think if Farleigh is an extention, it will be near Benton or even a Benton Extention but it will make the Benton area conjested , so I think it could be a Connolly or CSP Extention
This update is based off the Airport zone and connolly doesn't fall under airport zone, it can't be possible that it will be a extension near connolly. However the tables might turn..
@@Specton1825 Other stations are getting updates too. Namely city hospitsl
@@Cal90208 just see the last sentence of my comment.. I dont mind other stations getting upgraded but its mostly airport zone.
Maybe James Street extension??
already came:)
Jam jam jam :)
Now the extension is released so ...
ik where is the line at
V2.0 YAY!!!!!!!!!!!!
Kills scr drvs to release updates*
well... then they'd be dead and so no updates could be developed
0:02 games? i only know experriences
hahahah
Terminal 3 is not based on Heathrow. It is based on Stansted Airport...
Hooe it will npt get the buffer distance...
If Farleigh Is here probably West Benton gone
Might be no Esterified
(this is my opinion) i think, farleigh is the new name for james street
Dweller, I think the extension may happen in the future.
Farleigh could be renamed james street
Probally a new Map Watch to the Ride from West Bento to Faraday Road you ca drive into the Depo and also at Newry Is it a start of a cpletet new Map refres or a copltete New???
A Benton or Waterline Refresh
Who is watching this after the Esterfield extension?
U said not Esterfield and now it's actually Esterfield lol
Farleigh could be Esterfield because nobody really confirmed that would be the name
it literally says on the station sings in the sneak peek
By this I mean that Nobody said Esterfield would be called Esterfield
Well this aged like milk
I think its near leighton
Well I trespassed a little bit and on the current version the tracks beyond js seem to continue all the way to lsr and then curve to the left and then vanish on the hills
@@Tygereal How the hell did you get across the river bit after JS?
@@TransportofPerth I basically turned the graphics at max. Anyways I didn't walk on the tracks, I did walk from JS to US then followed the tracks until they disappeared on the hills at LSR
@@TransportofPerth I walked onto the river btw
British Railway will change that
I guess this is why the city doesn't look that detailed
thanks for sayng our name : kids.
This sounds like a tom scott video...
u sure??
Update today ?
yes
@@electrostar5161 What time ?
@@disappointingmarbleraces9028 LOL FOOLED YOU
I though it was going to be 2.0 next???
No???
No kids it’s not 2.0, 2.0 would mean a full overhaul of the network just like 1.0.
@@xczzer +1
im lucky to have an 8th gen i5 laptop. not the most powerful but id say probably the best bang for buck for gaming, despite the integrated graphics...
Pls don’t spoil it I have only “Newry- Greenslade”
AMTRAK
When you mentioned the graphics try xbox I play on xbox you can't change graphics from max and can't speak or see what people say