What do you mean when you say blank and “I built that out” when you’re talking about the deck and compartments in the back? Does that mean you did the fiberglass work yourself or you had them do it in Mexico?
Bitchin' boat! That top looks awesome👍 I'm stuck between that and the w-29. Just worried about the beam vs our current boat. What's the width of the deck port to starboard at the helm?
Does the boat come with USCG certification and are you able to register the boat with TX numbers? Great job on the build but Im thinking for me the top mounted on the gunnels would hinder fishing.
I'll go get one if I knew how to trailer it back to florida. did you bring yours back on a trailer from imemsa? did you take your own? was the price 6500 with trailer?
Back here again still dreaming of a setup 😂 How’s the wake off of this thing? Looking for the perfect build for kitesurfing adventures and wakeboarding / hydrofoiling.
@@chachacha5650 sure, Cougar Marine in San Benito,TX did the build out. I bought the hull at an Imemsa dealer in Matamoros right across from Brownsville TX. I posted his email in another comment from a few weeks ago. Great guy. I have multiple buddies that have also bought one from him.
Great boat! I'm waffling between the 25 and 26BA's. Huge difference in capacity! What are the performace differences between the two you've found? Was there a website for Rodolfo? Did they do your floor, seats, boxes, and console at the factory or did you do the glass work? Looks great! Any idea as to what your tongue weight is?
I have some pics of the 25 and 26ba hull next to each other. 2 totally different animals. The 26ba is almost a foot wider. I had Cougar Marine in San Benito TX do everything for me. I just don’t have the time. No idea on the tongue weight but it pulls easy.
@@scottbarno6810 hey Scott, are you on the “panga boat owners” Facebook page? My brother is building one right now and just posted pics. I can send you the info through there as well
Just started looking into boating and came across these. For a newbie are these hard to learn? Any suggestions for someone whos never taken a boat out before? Just want to learn and need some direction. Thanks
It’s all about your weight balance. I would also reinforce the transom if you wanted to go heavier. You could probably do a 250 or 300 if you wanted the speed. The sweet spot on mine is around 30mph. I can get it into the mid 40s and cruise well also.
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
Did you cross and pick it up yourself? I’m in Texas and looking at the same hull. I’m curious what all is involved in going to pick one up.
Nicest panga I’ve ever seen, love the high sides most others are to low. Great layout
Thank you sir
What do you mean when you say blank and “I built that out” when you’re talking about the deck and compartments in the back? Does that mean you did the fiberglass work yourself or you had them do it in Mexico?
Bitchin' boat! That top looks awesome👍 I'm stuck between that and the w-29. Just worried about the beam vs our current boat. What's the width of the deck port to starboard at the helm?
Gorgeous!!
I love this, looking at doing something similar would love to pick your brain.
Sweet ride for your warm waters!
Thanks amigo. Yes we are down on the bottom tip of Texas. Many hot days.
Does the boat come with USCG certification and are you able to register the boat with TX numbers? Great job on the build but Im thinking for me the top mounted on the gunnels would hinder fishing.
The company who built it out took care of that. They are a boat builder. Cougar Marine in San Benito, Tx
Around how much does a boat like that costs?
I like it. Awesome boat ñ!
Nice set up bro im looking to get me the 22 BA what was ur cost for eveything excluding the hull
I'll go get one if I knew how to trailer it back to florida. did you bring yours back on a trailer from imemsa? did you take your own? was the price 6500 with trailer?
very very cool boat indeed!
Back here again still dreaming of a setup 😂 How’s the wake off of this thing? Looking for the perfect build for kitesurfing adventures and wakeboarding / hydrofoiling.
Sorry just seeing this. It will throw a good wake with some people in back right before getting it on plane.
Epic setup dude! Really wanna build one of these things out. What was the total cost for everything finished?
Man, I went a little overboard with everything. Trailer $4500, Motor $19k, Hull $5500, around $15 for build out.
@@carltonmartin9430 wow that's inexpensive compared to prices here in SoFl. May I have contact information?..im very interested in a build
@@chachacha5650 sure, Cougar Marine in San Benito,TX did the build out. I bought the hull at an Imemsa dealer in Matamoros right across from Brownsville TX. I posted his email in another comment from a few weeks ago. Great guy. I have multiple buddies that have also bought one from him.
@@carltonmartin9430 thanks!
@@ejs93033 $15k
Are you running a 20" shaft motor or 25"? Thanks
Great boat! I'm waffling between the 25 and 26BA's. Huge difference in capacity! What are the performace differences between the two you've found? Was there a website for Rodolfo? Did they do your floor, seats, boxes, and console at the factory or did you do the glass work? Looks great! Any idea as to what your tongue weight is?
I have some pics of the 25 and 26ba hull next to each other. 2 totally different animals. The 26ba is almost a foot wider. I had Cougar Marine in San Benito TX do everything for me. I just don’t have the time. No idea on the tongue weight but it pulls easy.
Thanks
Hi Carlton..nice rig! Talked to the guys at Cougar..very nice.
Who was your dealer in Matamoros?
Thanks,
Scott in Tampa
@@scottbarno6810 hey Scott, are you on the “panga boat owners” Facebook page? My brother is building one right now and just posted pics. I can send you the info through there as well
@@carltonmartin9430 Yes Sir thanks..really like your setup.
How much did the deck and below cost? Fiberglass, plumbing, and fuel tank.
any performance numbers on the 200?
$2500
i bet you could buy 3 of those boats brand new for some of the stuff built in the US
What type of fuel tank you used I am trying to find one for my panga
Sir, how much money did you save by buying in Mexico?? Were there any paperwork troubles??
They make a 29 footer that has me panting...LOL
About half. Zero paperwork to do if it’s a personal use boat. I saw a 29 this weekend. Sweet boat but too big for what we do.
How heavy is it and how fast will it go an is it a v6 or v8
Who did the build out? And what did the top cost? Thanks!
I had a company in San Benito TX called Cougar Marine do the build out for me. They also did the aluminum work. The top was $3500.
Just started looking into boating and came across these. For a newbie are these hard to learn? Any suggestions for someone whos never taken a boat out before? Just want to learn and need some direction. Thanks
It depends on what you want to do with it. This may be a little big for your first boat. Are you fishing? Fresh or salt water?
@@carltonmartin9430 yes for fishing saltwater bays and offshore
does the dealer have a website for their hulls thanks
Nice set up! How much did it cost? Just the shell right? No outboard and center console.
This hull is around $6,500. The regular 25 is around $5200.
@@carltonmartin9430 Sweet, Thanks!
Thanks for the video,nice Panga! Where you got that top from?
@@alexmolina7705 I had it made at Cougar Marine in San Benito, TX.
@@carltonmartin9430 thanks
how much did the 26BA cost?
esta vendendo ? Quanto? onde posso ver ela ?
Beautiful boat
How much did you spend on that boat? Thanks
New trailer, all my electronics, bells and whistles right at $50k.
What mpg are you getting at cruise? Thx
Between 4-5
where did you get the top and how much was it?
Cougar Marine in San Benito TX. Around $3k if I remember correctly
Nice boat,,,do you have a address of the bilder or fone # ,,I'll be very grateful 🙏
Want one like this so bad
How much CIF Papua New Guinea
How much did it cost you?
I have around 50 in it. The hull was around $7k
Whats the limites hp u could put on that panga
It’s all about your weight balance. I would also reinforce the transom if you wanted to go heavier. You could probably do a 250 or 300 if you wanted the speed. The sweet spot on mine is around 30mph. I can get it into the mid 40s and cruise well also.
do you have any pictures of the bare hull
Yes, many. I have pics of all the Imemsa hulls
@@carltonmartin9430 where would i be able to see them just curious what the bare hull look like inside is it just ribbbed thanks for the info
@@donsgee9654 hey Dons, I can send them through Facebook. I think I found you and sent you a message. If that’s you let me know
@@carltonmartin9430 can you post them on panga boat owners group would be ok thanks i think that a public group
Please give me the web of your company.
I don’t have a company.
Cost for the hull?
Around $6500 FOB Mexico
Hell ya!!
I like it
What was the cost??
I have $50k in it with everything including the trailer.
@@carltonmartin9430 Sir, thank you for the reply.👍👍
Do you have any idea on the mpg and speed with this setup?
Are you on the panga fb page? I can post stuff there
Not the trailer either im talking glass work
How many illegals are you moving per month?
Chingos. $500 head