Gutting the Interior: 1987 Toyota Pickup 4wd
HTML-код
- Опубликовано: 8 апр 2020
- Hey Garage Heads! Today I'm stripping the interior of my 1987 Toyota Pickup/Hilux 4x4. This cab is rusted beyond repair and the frame has a little bit of life in it to use on another project - stay tuned!
Some other videos about this truck:
Intro, when I first brought it home: • 1987 4WD Toyota Pickup...
Starting the 22RE for the first time: • Toyota 22RE First Star...
Removing the fiberglass bed and looking the frame over: • 1987 4WD Toyota Pickup...
Here are some other Toyota videos you may find helpful:
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
Remove Door Panel: • How to: Remove Toyota ...
Remove & Install B-Pillar Trim Covers: • Toyota Pickup/4Runner ...
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
The Vent Window Conversion: • How to: Toyota Pickup/...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
Toyota Pickup Fiberglass Bed Review: • Toyota Pickup Truck Fi...
I don't have Patreon or ask for donations but you can support the channel with some rad Yota gear from my store: 6thgeargarage.com/merchandise/
Follow Us:
Instagram: 6th_gear
6thGearGarage
That would be a great interior to come up on! That shit ain’t cheap!
Disc changer behind the seat. That’s what the elect. plug and the screws siliconed were for.
Plenty of work but fun at the same time. Love the Yota.
I love you. I have an 80, 87 dully, and recently an 84 ext. cab... I’m going to attempt a crazy build... 84 cab on the 87 1 ton dully frame with a 8x12 foot deck to build on. Great videos
Thanks for taking the time to post up your videos! I'm getting ready to do the heater core in my 86 4Runner and these videos are great help. Then I need to do the body mounts.....argh that's gonna suck.
great channel
I've yet to own one of these trucks that didn't have some wonky wiring splices. Usually alarm systems or tow harnesses, but they are never done properly IMO. Luckily I enjoy correcting and eliminating unnecessary wiring.
Most Xtra cab SR5 trucks in Canada have rear window defrosters in them! both of mine do!
the deck lamp switch is specific to 4runners, it is a small light in the drive side rear trim panel to illuminate the cargo area, it is not a pickup part. the inclinometer was hardwired in because it was also pillaged from a 4runner, pickups were not offered with this feature (although the 4wd tercel was).
I did a double plug setup to get a newer CD player to work with my tape deck. I had a small selector switch to cut the power to the tape deck, or the CD player depending on what unit was not in use at the time.
This truck is savable!
Ill buy the sun visors! 😃
I could use a lot of these interior parts man
Sr5 dash, I have defrost button too in my xtracab sr5
Hey, so at the end of the video, you we’re talking about salvaging the carpet. Wondering if you’ve ever put one in before and they way you’d go about doing it? Future video in the making perhaps?? 🤷🏼♂️ Love the videos, keep em coming!
I love have the Bench seat in crew cab LN65 plus same brown Interior
I’m currently LS swapping my 84 4runner. I really want to keep the AC but need a way to retrofit the AC line. But it is going to be a toy for the dunes so I may just gut the dash as well. My LS heads hit the bulge in the firewall where the AC lines go through.
Wow I want that center consol piece, forget what they are called.
Reminds me of top gear.
Do you have to remove the entire sash to remove the AC condenser box?