Great video, gents! I had all but the 10mm one behind the door pull. A sincere thank you for helping me track down a vibration that's bugged me for years. Two things- if you undo the two inside electrical plugs, there's no need to undo the door release plug. Also, I found reinstallation MUCH less risky/easier to remove the inner window seal, reinstall that, then push the panel onto it instead of trying to align everything while pushing the clips back down. Remove the metal clips from the plastic, don't just pull it off (or you'll damage the seal). If you too are tracking down a vibration... a bit of rubbery insulation (silicone, etc) between the white attachments and the black holder will fix you right up. Thanks again!
sir, would you happen to have a video on how to replace the c7 inner fender liner? or can you tell me ? a large rock destroyed mine and I guess it is simple job after the tire is removed but I am not sure any info will be appreciated thank you.
I do not have a video on the inner fender. However, that would be a great video to make and I may make one in the next 30 days. That is a great suggestion. I think the inner fender is a common problem requiring replacement.
@@TheWhatisright if you do make a video can you please let me know. I would greatly appreciate it. I need to replace mine in order to be able to install a front spoiler since my bolt holes were damaged swell as my right splash guard here is my email rafaeljimenez64@aol.com. Thank you in advance.
Do you see where your tan interior is on the side door panel. I want to change mine out to red which is currently black at the moment. Would I have to remove the entire door panel to install ?
im in the process of upgrading my interior , i currently have black door panels and want to replace them with the adrenaline red /black ones . i found a set but dont know if a 2014 panel will fit my 2019 , im told there are different part numbers for the 19 as compared to the 14 , are they interchangeable ? i need to find out before i lay out the cash thanks in advance
Not sure. However there are many reasons to pull off the panel. Not just to replace it. For example, an electrical problems, car accident, glass replacement of some decore upgrades.
Great video, gents! I had all but the 10mm one behind the door pull. A sincere thank you for helping me track down a vibration that's bugged me for years. Two things- if you undo the two inside electrical plugs, there's no need to undo the door release plug. Also, I found reinstallation MUCH less risky/easier to remove the inner window seal, reinstall that, then push the panel onto it instead of trying to align everything while pushing the clips back down. Remove the metal clips from the plastic, don't just pull it off (or you'll damage the seal). If you too are tracking down a vibration... a bit of rubbery insulation (silicone, etc) between the white attachments and the black holder will fix you right up. Thanks again!
Great into. Thank you so much.
Thank you from Madagascar
Thank you from Germany👍
Is it possible to remove and replace the arm rest trim on both door panels?
Does it matter if the window is up or down?
sir, would you happen to have a video on how to replace the c7 inner fender liner?
or can you tell me ?
a large rock destroyed mine and I guess it is simple job after the tire is removed but I am not sure
any info will be appreciated thank you.
I do not have a video on the inner fender. However, that would be a great video to make and I may make one in the next 30 days. That is a great suggestion. I think the inner fender is a common problem requiring replacement.
@@TheWhatisright if you do make a video can you please let me know. I would greatly appreciate it. I need to replace mine in order to be able to install a front spoiler since my bolt holes were damaged swell as my right splash guard here is my email
rafaeljimenez64@aol.com.
Thank you in advance.
@@RafaelJimenez-hz9gu Sure will.
Do you see where your tan interior is on the side door panel. I want to change mine out to red which is currently black at the moment. Would I have to remove the entire door panel to install ?
Yes, the panel would need tp be removed.
im in the process of upgrading my interior , i currently have black door panels and want to replace them with the adrenaline red /black ones . i found a set but dont know if a 2014 panel will fit my 2019 , im told there are different part numbers for the 19 as compared to the 14 , are they interchangeable ? i need to find out before i lay out the cash thanks in advance
I talked with some people in my corvette club last night and it should fit.
thanks
Great video as usual Hop. . Do you have any videos on removing the silver drivers side door panel trim so I can have it hydro dipped?
I do not have a video on that but it may be something I do in the future.
On my 2015, it's a t30 torx.
I wonder how many out of the almost 7k that really changed a passenger vette these make of years
Not sure. However there are many reasons to pull off the panel. Not just to replace it. For example, an electrical problems, car accident, glass replacement of some decore upgrades.
@@TheWhatisright indeed I had to pull off door panel to take off mirrior and Weatherstrip molding on out side passenger door to properly paint
What about Updating Speakers!
Thank you.
Great
Thanks
Thanks for the video. It was very helpful with the issue I had described in this video: ruclips.net/video/G2nx_H4cIj8/видео.html