Excellent video format. No RUclips fluff or egotistical/narcissistic viewing of humans. Also like that you provided description of information in the presentation.
Very good realisation, but as I agree with using carjack for initiating elevation, in the second stage of frame elevation more simple and efficient methodes are availables... F.NAJJAR. MD from Tunisia.
No the first jack is unable to push the scissor joint at the low starting point. With the joint that low it would take a tremendous amount of force. The first jack easily raises the joint/table past that point.
I'm thinking of using a old garage door opener to lift up the one I'm building and a set of hospital bed lift gears... then I have it remote control and no bending over...
@chuckgunder1451 if you would pivit the base of the jack and position the jack lower than the lifting point, do you think it would have worked with only one jack?
Не понимаю зачем два домкрата. Достаточно одного горизонтального. Не, человек сделал стоящую вещь- респект! Но делая подъемник для легких мотоциклов и мопедов типа хонда дио, буду устанавливать только в горизонтальной плоскости. Ну или два спаренных но опять таки в горизонт.
You need the first jack to raise part way a little. The single horizontal jack can not lift or takes a lot of extra force to lift from a fully open scissor state with even a small amount of weight to the table. I wanted the table to lift from the lowest point.
'' SERIOUS QUALITY '' ...yup, no doubt. ALOT of those drill ' bits ' coming from china, those yellow ones, AREN'T WORTH A plug penny ! Don't even make very good awls, or punches - only good for pounding into a wall ; use for hanging hoses. Cheapest ' steel ' ever...chinesejunk. I use very old, GOOD drilling bits - all black ! or titanium, or carbide tipped.
Excellent video format. No RUclips fluff or egotistical/narcissistic viewing of humans. Also like that you provided description of information in the presentation.
VERY NICE ! Thank you for its demonstration. You have a good design capability talent that God has given you!
Hey Chuck, I love this project. Simple design but so effective and useful. tank you for sharing your great skill and knowledge. Greetings from Europe.
This is what I have been saving all my angle iron for. This is awesome. Thanks so much for sharing this knowledge.
Love it! simple and so practical. Will be putting one together. Thank you for sharing Chuck.
wow, mis felicitaciones chavo, hay que hacer uno o varios están super bien, saludos desde mi tierra, Monterrey, N.L., México. ´.
Thanks
I need to build one of these out of wood for some very light-duty work.
Hey friend! that’s really nice and simple! Thank you for sharing!
Thanks
@@gse244 I love it Chuck!!!..simple and very useful indeed. Do you care to share the plans?
Very good realisation, but as I agree with using carjack for initiating elevation, in the second stage of frame elevation more simple and efficient methodes are availables... F.NAJJAR. MD from Tunisia.
You should copy right your that right there, that’s so much money right in your hands.
Something like this would be great for people who if they fall on the floor they can’t get back up and need help
Muito prática.. Gostei.. Show
wow amazing
probably going to copy this one
Sounds good. Thanks
I'd be lieng if I said that wasn't cool. But you are still hilarious.
Ahaha perfect thanks. I want to make this inside a cabinet so my 3D printer can pop up when needed, otherwise its hidden away.
Very nice design
Очень интересно, думаю о таком варианте.
Thanks
Cual es el peso máximo que levanta
How much cost for making scissor lift table. & wht ill be the Capacity for this scissor lift table. This is the best video. Pls rly ASAP.
So very good
Excellent idea, I will copy it for a school assignment, by chance you have the measurements...? Greetings from Monterrey, mexico!!!
What i have should be in text in the video.
Thanks!
класс!!!!! то что надо!!!👍
Good job
what would happen if you only had the horizonal jack ? The vertical one only looks redundant .
To much force to over come from scissor down position.
Obviously I'm missing something here. Why is the table two-stage? It looks like it would work just fine using the horizontal jack alone.
No the first jack is unable to push the scissor joint at the low starting point. With the joint that low it would take a tremendous amount of force. The first jack easily raises the joint/table past that point.
I meant the second/horizontal jack is unable to lift alone.
@@gse244 I suspected that might be it, but wasn't sure. Thanks for the info. :)
I'm thinking of using a old garage door opener to lift up the one I'm building and a set of hospital bed lift gears... then I have it remote control and no bending over...
@chuckgunder1451 if you would pivit the base of the jack and position the jack lower than the lifting point, do you think it would have worked with only one jack?
J'aime mon travail
Не понимаю зачем два домкрата. Достаточно одного горизонтального. Не, человек сделал стоящую вещь- респект! Но делая подъемник для легких мотоциклов и мопедов типа хонда дио, буду устанавливать только в горизонтальной плоскости. Ну или два спаренных но опять таки в горизонт.
You need the first jack to raise part way a little. The single horizontal jack can not lift or takes a lot of extra force to lift from a fully open scissor state with even a small amount of weight to the table. I wanted the table to lift from the lowest point.
Pretty bitchin!
How much does it can carry
Can anyone tell me the formula needed to get the allowable speed at a specific height of the lifter for it to not buckle.
nice design, but if you only use 2nd one what is the range?
Lifting from that level and with the scissors down that low a first jack is needed. The second jack cannot over come the forces and lift with cargo.
Great work , how can I get your plans , great need for shop
Really no plans. Built from scratch on the fly. Hope enough info in the video. Thanks
'' SERIOUS QUALITY '' ...yup, no doubt. ALOT of those drill ' bits ' coming from china, those yellow ones, AREN'T WORTH A plug penny ! Don't even make very good awls, or punches - only good for pounding into a wall ; use for hanging hoses. Cheapest ' steel ' ever...chinesejunk. I use very old, GOOD drilling bits - all black ! or titanium, or carbide tipped.
What is the maximum weight it can lift?
I don't know. I just use it to lift push lawn mowers.
เคี่รองยก500กิโล ยากจะเหัน
oke up
Não tenho força nas pernas para me erguer. Preciso adaptar uma cadeira com um de sistema de elevação até 1 metrô de altura.
Alguma ideia?
low safety