Tutorial Inventor - 197 SHEET METAL SM-004

Every tutorial brings new abilities.
You can slow the film on RUclips by using Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
IMPORTANT (Romanian) - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.co...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/co...
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
Please, use the below link to download the edited drawing for this Tutorial! The dimension 71 was missed...
To have access to the ASSETS offered to run this tutorial you must subscribe to membership level 2 (Jorneyman). The subscription will give you access to ALL the assets for one month, but also to get the big POSTER that contains ALL the tutorials - see details in tutorial no. 361. If you do not renew your monthly subscription, you lose access to future updates of these add-ons. Getting the assets only by subscribing to the membership is motivated by the fact that they are created in addition to simply watching the tutorial, which is free.

[@AmithKumar_lensmen]

Your tutorials are really helpful for me. I started using inventor for sheet metal works few months back and I take most of the reference from you. I really look forward to learn more from you. Thank you so much

[@prof-stancescu]

Great to hear!

[@mohammadfarhadi4870]

Informative👏🙏

[@prof-stancescu]

Thanks a lot!

[@amarendrareddy1215]

Hi Prof, thank you for providing all detailed and explained tutorials. can you please make a tutorial for CNC Reports generation for sheet metal.

[@prof-stancescu]

Thank you my friend. Unfortunately this special domain is not on my list.

[@petersolan2693]

Hi Prof, thank you again for these wonderful educational tutorials that you keep making available to all.
When I tried to reproduce this item, I could not see where you got the dimension ‘71’ at 04:23, perhaps I missed something?

[@prof-stancescu]

Great job!
You are right, I forgot the dimension 71...
I placed the drawing under the name Tutorial Inventor - 197 SHEET METAL SM-004.zip here: www.fastgrup.ro/tutorials
Thank you!

[@petersolan2693]

@@prof-stancescu Thank you Sir.

[@mihailanga7352]

Hello Mr. Stancescu, thank you for providing all detailed and explained tutorials. Can you make a tutorial about top down assembly design based on sheetmetal parts?

[@prof-stancescu]

I'll try, but not for sheet metal parts but normal parts

[@mihailanga7352]

@@prof-stancescu sounds great, thank you!

[@WowRodg]

Thanks a lot 👍

[@prof-stancescu]

You are welcome

[@maycokhih3t129]

tks teacher

[@prof-stancescu]

You are welcome

[@TonyRios]

Thank you! Is there a way to animate the folding/unfolding using Inventor Studio?

[@prof-stancescu]

See my tutorial Tutorial Inventor - 158 TWISTED BRACKET from the minute 7:10

[@TonyRios]

@@prof-stancescu Ok thanks! I'm familiar with animating a parameter, my question was how do you animate bending a "Face" in sheet metal for this part? Is it as simple as creating a plane around an edge (assign variable) on the first Face in this part? I'll give it a try and report back.

[@ianm1898]

Hi proffesor. Is there any difference between creating in sheet metal and creating in solid mode then convert to sheet metal? Thanks

[@prof-stancescu]

The difference is multiple. If you use Sheet Metal module the bending is made automatically as it is stated in the Default Settings, together with the lateral cuts. If you use solid mode with extrusions etc. you have to place right offsets and right radii, and also lateral cuts a.s.o.
And bending is only one of the Sheet Metal associated tools.
If your question is denoted from the difficulty of learning something new, my advice is to try to learn and use the Sheet Metal module instead of solid mode.

[@johntravolta2063]

Can You tell me for what this metal sheet can be used for?

[@prof-stancescu]

I cannot - it was a simply found object in a stuff

[@trananhtuan7139]

could you prepare lesson both 3D modelling + 2D detailing drawing with bill of material ?

[@prof-stancescu]

I will try

[@prof-stancescu]

For BOM see my tutorial no 33: ruclips.net/video/l81NQPT2fk8/видео.html

[@abderrahimbendrai1811]

Just to precise that my comment was about tutorial 197 sheet metal.

[@prof-stancescu]

What comment?