Tutorial Inventor - 034 SHEET METAL - Practice (SM-001)

Every tutorial brings new abilities.
You can slow the film on RUclips by using the Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
IMPORTANT (Romanian) - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.co...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/co...
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
Download assets from www.fastgrup.r...

[@danielvalbuenahernando2187]

Thank you very much. Very well explained! "If the drawing is wrong, you are wrong"
Best wishes

[@prof-stancescu]

Thank you - go ahead and enjoy!

[@Kalam-vg5zj]

Prof Stancescu, your explanation is excellent, how you have described the dimensions is really helpful for me.

[@prof-stancescu]

Go ahead and enjoy!

[@duijeblok3479]

Thank you Mr. Stancescu for the good lessons, learned a lot, the tip I got from my friend from Vaslui, and I can tell you that it is a very good tip. thanks again.

[@prof-stancescu]

That's great!

[@edoardodidonato3767]

You are a great teacher, thank you so much!

[@prof-stancescu]

Glad you think so!

[@ConstantinDancu]

Thank you, Constantin! Very well done!

[@prof-stancescu]

Glad you liked it!

[@M07.engineer]

Great professor you are sir. It is very useful tips and tricks sir...❤

[@prof-stancescu]

Keep watching

[@MattyK166]

Thanks for the tutorial. i found some great tips and useful tricks just going slowly and seeing how you used the dimension and mirror feature.

[@prof-stancescu]

You are so welcome!

[@helbertvalencia5690]

Thank you Sir I have learnt a lot with your videos.

[@prof-stancescu]

You are welcome

[@JMVD48]

Thank you very much for all the important hints you show us, it's not all that easy, I find understanding the cutouts 2 by 1 mm quite complicated.

[@prof-stancescu]

Glad it was helpful!

[@nileshbehere7535]

Well explained professor

[@prof-stancescu]

If you want to place my BIG POSTER on your room's door JOIN my channel. Watch my tutorial no. 361. Thank you!

[@007connor1]

Good lesson, greetings from Mexico!

[@prof-stancescu]

Thanks! 😃 Good luck Mexico!

[@adanbanuelos1266]

Very helpful! ❤

[@prof-stancescu]

Glad it was helpful!

[@christophedupont5490]

Thank you very much

[@prof-stancescu]

You are welcome

[@obendrayadav3099]

new keep making video like this sir for sheet metal drawing

[@prof-stancescu]

Sure I will

[@H8Bully]

Thank you for the tutorial clip prof. Its good to obtain the Inventor professional program 2020 version at home for drawing.

[@prof-stancescu]

Yes, it is, but there are people who want to know what is new in Inventor 2022, like me...

[@annguyennguyen7002]

How wonderful

[@prof-stancescu]

Thank you!

[@vuvanthem3401]

thanks you so much!

[@prof-stancescu]

You're welcome!

[@ddhirajgupta]

Thankyou

[@prof-stancescu]

You’re welcome 😊

[@mjtunstall1976]

Nice work but at the end of the tutorial with the flat pattern, all drawings MUST have same scale, not allowed to have 2 different scales to avoid confusion

[@prof-stancescu]

I placed the flat pattern only as an information, not as part of the drawing, but you are right - thank you my friend!

[@imo197501]

Hi Sir!
If you had selected "Mirror solids" instead of "mirror features" your work would have been faster. By the way thank you!

[@prof-stancescu]

Yes, you are right - thank you!

[@paolococo7990]

Salve Prof. Le chiedo scusa ma volevo solo un chiarimento. I due fori asolati sulla parte curva sono stati creati con un comando taglia da una proiezione di un piano, cioè come se vanno fatti dopo aver piegato la lamiera. Ma cosi non mi sembra nella realtà, perchè io li realizzo sulla lamiera in piano prima di piegarla. Io nel suo disegno ho usato il comando spiega e ripiega per crearli in modo da sembrare più reali. La ringrazio in anticipo se può valutare questa mia richiesta. Buon lavoro

[@prof-stancescu]

Paolo, io penso che tu intenda l'ora 17:05 - 18:19.
Vedete, quelle due tacche si applicano automaticamente e si trovano su FLAT PATTERN.

[@paolococo7990]

@@prof-stancescu Salve Prof. La ringrazio per avermi risposto.
Intendevo che se prova a ruotare il Flat Pattern di 180° il taglio della lamiera si vede diverso.
Grazie veramente della sua attenzione.

[@gggraziano]

Hi professor, are the workings at the 25:00 time line done with a punch?

[@prof-stancescu]

Yes, CUT is equivalent here with PUNCH

[@obendrayadav3099]

Good morning sir

[@prof-stancescu]

Morning

[@bowosan3027]

how to technical drawing sheet metal for production manufacturing?

[@prof-stancescu]

I do not understand - the drawings for sheet metal parts are made as usual, including the unfolded part.

[@bowosan3027]

@@prof-stancescu OK Thank you. so by unfolded yah

[@Wolf-fs6xj]

Thank you very much

[@prof-stancescu]

Thank you too