Hello Sino,don't you have a video guide where you show how to install the display? I would also like to do this mofica but I'm afraid of doing crap being that I bought the trust d1 for even a month. Thank you
Hello, did you solved problem with controller because I have same problem, pas sensor does not workn i have E07 error (hall sensor is connected). I connected throttle to red,black and white wire and pedal assist to red,black and blue wire
plug the motor cables (power and hall sonsor) plug the lcd connector, plug the self-learning cable( single green), plug the power cables, turn on, the motor will rotate, if it's the right direction, wait few seconde and disconnect the self-learning cable, then power off from the lcd, if the rotation is on the wrong direction, unplug the self-lerning cable, and plug it again, it will correct the rotation, then wait few secondes and disconnect it, then poweroff the system, the E07 will dispear, also keep this cable unplugged after that
hello Filip,i was watching this video and i read some comments. I bought the trust d1 for a month and I would like to do this too. And so difficult? have you solved the error problem? is the bike okay? Thank you
Hi do you know from where to order the original controler for Fiido bike. I do not want to increase speed or do anything else I just want my bike to work because now over month I can not ride because of defective controler ? Thank you !
Hello, I ordered a d1, but it has a different controller (LED not LCD). Is there still a way to speed hack it? Please looking forward to ur response , thnks
I will, when my project is finished. At this time the controller doesn't work like I excepcted. The controller stops at max speed and the PAS sensor doesn't work.
@@Sino1985 Hello, did you solved problem with controller because I have same problem, pas sensor does not workn i have E07 error (hall sensor is connected). I connected throttle to red,black and white wire and pedal assist to red,black and blue wire
I didn't manage to run this controller with the PAS and throttle. The Fiido D1 and D2 has the same motor. I would by the controller which I have listed in my other video with Fiido D2.
@@Sino1985 the another controller is way to expensive. From the expensive controller for the Fiido d2 can you install the throttle from the hand grip rather than press the button to have it in moped mode?
@@Sino1985 ok. do you think the cheaper controller (the ones that is showing in this video) will work on the fiido d2? By working I mean after stalling all the connections, the assistant mode, the moped mode by hand grip, the front light, the horn and so on..
I will, the controller doesn't stops when i brake and i can just set the speed over the display. Here in germany it is just allowed over PAS sensor. I will inform you when my bike is finished.
Hello Sino,don't you have a video guide where you show how to install the display?
I would also like to do this mofica but I'm afraid of doing crap being that I bought the trust d1 for even a month.
Thank you
Nice carpet!
Nice test! I'll stay tuned for any news!
Hello, did you solved problem with controller because I have same problem, pas sensor does not workn i have E07 error (hall sensor is connected). I connected throttle to red,black and white wire and pedal assist to red,black and blue wire
No, see other comments.
Have you solved this issue by now?
plug the motor cables (power and hall sonsor) plug the lcd connector, plug the self-learning cable( single green), plug the power cables, turn on, the motor will rotate, if it's the right direction, wait few seconde and disconnect the self-learning cable, then power off from the lcd, if the rotation is on the wrong direction, unplug the self-lerning cable, and plug it again, it will correct the rotation, then wait few secondes and disconnect it, then poweroff the system, the E07 will dispear, also keep this cable unplugged after that
frats pill
Thank you
hello Filip,i was watching this video and i read some comments.
I bought the trust d1 for a month and I would like to do this too.
And so difficult? have you solved the error problem? is the bike okay?
Thank you
Hi do you know from where to order the original controler for Fiido bike. I do not want to increase speed or do anything else I just want my bike to work because now over month I can not ride because of defective controler ? Thank you !
Hi! I only need to change my controller! It stops working! Can you tell the precise model for the D? I can't find it!
Can you help me mine gives fault code E10 it says cominucation reception failure
Hello, I ordered a d1, but it has a different controller (LED not LCD). Is there still a way to speed hack it? Please looking forward to ur response , thnks
I have no idea to speed hack the original controller. But I dont think that you can get more speed with the original controller.
How to increase speed ???
can a tutorial and spare parts links be purchased for editing? thank you
I will, when my project is finished. At this time the controller doesn't work like I excepcted. The controller stops at max speed and the PAS sensor doesn't work.
@@Sino1985 ok, thank 😉
@@Sino1985 Hello, did you solved problem with controller because I have same problem, pas sensor does not workn i have E07 error (hall sensor is connected). I connected throttle to red,black and white wire and pedal assist to red,black and blue wire
Do you think is possible to install this kit on the fiido D2 as I saw it on AliExpress for 30€?
I didn't manage to run this controller with the PAS and throttle. The Fiido D1 and D2 has the same motor. I would by the controller which I have listed in my other video with Fiido D2.
@@Sino1985 the another controller is way to expensive. From the expensive controller for the Fiido d2 can you install the throttle from the hand grip rather than press the button to have it in moped mode?
@@suratullahkhan6158 there is a connection to a throttle but I have not install it because it is not allowed in Germany
@@Sino1985 ok. do you think the cheaper controller (the ones that is showing in this video) will work on the fiido d2? By working I mean after stalling all the connections, the assistant mode, the moped mode by hand grip, the front light, the horn and so on..
where you saw kit for fiido, can you give melink to order Fiido D1 original controler ?
interesting, can you explain how to intsall it on the Fiido?
I will, the controller doesn't stops when i brake and i can just set the speed over the display. Here in germany it is just allowed over PAS sensor. I will inform you when my bike is finished.
Is there a way to bypass the speed limit?
Yes, check the uploaded docment. Link is in the discription.
@@Sino1985 i cannot find the Link where is He?
@@cuzimrene9395 It 's in the discription. workupload.com/file/3WArPUMV
Thanks you !
Ciao se vuoi puoi unirti al canale telegram @FiidoD1electrik e ci dici come hai fatto siamo un bel gruppo tutti con la fiido grazie del video cmq
Ciao, io ho la fiidoD1 e conosco altre due persone che l'hanno appena comprata, come facciamo ad entrare nel canale telegram di cui parli?
@@torinobari24h qui @FiidoD1eletrik gruppo telegram oppure scrivi in cerca Fiido Italia
Ciao volevo chiedervi se voi siete riusciti a fare questa modifica?