Building a Tool Cabinet | Paano Gumawa ng Lalagyan ng Tools | DIY | Eroy & Rhona

Building a Tool Cabinet | Paano Gumawa ng Lalagyan ng Tools | DIY | Eroy & Rhona
CABINET SIZE: (we based the size on the area where we installed it)
●length - 150cm
●width- 45cm
●height - 88cm
MATERIALS:
●3/4 marine plywood - 3sheets
●(you can use 1/2marine plywood instead for drawer bottoms depends on the capacity of the weight you would store in it)
●wood strips or liston
●drawer slides - 9pairs
●drawer handles - 8pcs
●concealed hinge(c2) - 1pair
●black screws
●wood glue
Supplies we used that you can purchase online.(affiliate)
●PIONEER WOOD GLUE 500g
invol.co/cldyvhl
●PIONEER WOOD GLUE 500g x3
invol.co/cldyvqf
TOOLS USED:
●WOODWORKING POCKET HOLE JIG KIT DRILL GUIDES SET
invol.co/cl81a3j
●CORDLESS HAMMER/IMPACT DRILL DRIVER 18V 13mm NEW STANLEY SCH20C2K
invol.co/cl81a4v
●5806B CIRCULAR SAW 1050W 185mm 220V 50hz
invol.co/cl81e6p
●INGCO ELECTRIC JIGSAW 400W
invol.co/cl89ius
●LOTUS RANDOM ORBIT SANDER LTEX300
invol.co/cl81e9m
●TOLSEN 10125 F-CLAMP 50X250mm
invol.co/cl81eeq
LIKE | COMMENT | SUBSCRIBE
1000 subscribers na po tayo. Thank you so much for your views, likes, comments and subscriptions. Please keep on supporting us.. Keep safe everyone!!!
#toolcabinet #toolstorage #diy

[@ferdiellopez]

GYPSUM SCREWS ba ang gamit mo sa cabinet?GYPSUM SCREW ay designed at intended lang sa GYPSUM BOARD ONLY. HINDI SA CABINET.Dahil Ang gypsum screw ay hard,brittle at madaling kalawangin lalo na sa mataas Ang moisture Tulad ng kitchen.Madaling mag snap pag na Overstressed .Hindi design sa heavy koan Tulad ng cabinet. At Hindi yan STRUCTURAL SCREW . COARSE TREAD para sa wood stud at FINE TREAD para sa metal stud.WOOD SCREW ang dapat gamit sa pag gawa ng cabinet.HINDI GYPSUM SCREW DAHIL SA GYPSUM BOARD LANG YAN.

[@machingstudio6418]

Nag-aral po b kau ng woodworking? Nakakainspire naman po

[@eroyrhona]

Nood nood lang po sa youtube at ibang social media flatform.😊 Naglakas loob lang po nang hindi naman binabaliwala ang safety.😊

[@ItsCaricel]

I think those other things are just unnecessary. pinahihirapan lng ung work, pwede nmn ata lagyan n agad ng mga screw. anyway ang gaganda ng projects nyo ^^ thankyou so much for sharing

[@johnmartinvilleno7906]

okay po ba gamitin yung ganyan na pocket hole jig?

[@eroyrhona]

Ok naman po kung wala pang budget. Pero plano nadin po namin mag upgrade niyan.😊

[@romeosantillan642]

ganda ng gawa nyo po 😄 suggest lang po sa next project pa lagay mo ng materials na nagamit hehee para may idea po kami thanks po

[@eroyrhona]

Ok po sir. Maraming salamat po sa suggestion😊👌

[@pinoytechdiy4938]

Pa share naman boss panu ang tamang pag sukat ng drawer

[@eroyrhona]

Kung sa width boss, ibabawas mo lang yung kapal ng 2 slides na gagamitin mo.

[@MikeMonro]

Paano po yung cabinet para sa grass cutter

[@gilbertcristobal3791]

boss 1/2 lang ba yung plywood na gamit nyo? ano gamit nyo na screw at ano sukat? salamat

[@eroyrhona]

3/4 na plywood yan idol tapos black screw na 1.5" at 1"..thanks idol...

[@gilbertcristobal3791]

pwede bang grinder gamitin sa pag liha sa kahoy? salamat po

[@eroyrhona]

Pwede naman po. Pero para po sakin batay sa aking experience, alalay lang po lalo na sa mga plywood, kasi mas mabilis ang grinder. Or may grinder naman po na naaadjust ang speed.

[@kristofferlawchancelana8672]

Anong size nyan

[@eroyrhona]

Yung top nyan boss ay 45 x 150 cm. Height is 88cm. Binatay namin yan boss dun sa area na aming pinaglagyan. Tnx

[@kelljeff8813]

Pwede mahingi mga listahan ng materyales

[@eroyrhona]

3/4 marine plywood -3sheets
Woodstrips or liston
Drawer slides - 9pairs
Concealed hinge - 1pair
Drawer handles - 8pcs
Black screws
Wood glue

[@eroyrhona]

Pwede mag alternate sa drawer box bottom ng 1/2 marine plywood

[@quelamahaustv3601]

@@eroyrhona hm ngastos lahat dito?

[@eliseobolima4678]

Happy 1k sub ninong

[@eroyrhona]

Thank you sa inyo elijah 😊👌

[@jbbsbackyardfarm4063]

Anu po size nang screw ?

[@brandosalonga6300]

Mag boss ilang sheet ng plywood na gamit nyo?!!

[@eroyrhona]

3 sheets po ang nagamit namin jan. Thank you! 🙂

[@johnkimmagallanes7290]

Sir ano tawag yung kulay orange pang butas sa kanto?

[@eroyrhona]

Pocket hole jig idol. May link din po kami nyan sa description kung saan namin nabili. Thanks idol.

[@sharukhmatekuki5830]

Nice 👍🏻👍🏻 🇮🇳 Kuki 07|07|2022

[@eroyrhona]

Thank you so much Sir.👌

[@fernanmorales3150]

mag kano po ang estimated na nagastos nio sa materyales?

[@EINSTEINJOSE]

ano po size ng table nyo taas at lapad

[@eroyrhona]

Yung top nyan boss ay 45 x 150 cm. Height is 88cm. Binatay namin yan boss dun sa area na aming pinaglagyan. Tnx

[@neildimzon4199]

Masiklab ka pla boss.Galing tlaga mga class 11A.

[@eroyrhona]

Yes boss hehe. Sakto lang boss tamang pang bahay lang hehe. Maraming salamat boss!!

[@berniedeleon1770]

good jobe sir and mam, 💯💞

[@eroyrhona]

Thank you so much po Sir.☺

[@markeliseo8290]

Galing namn mam sir

[@eroyrhona]

Maraming salamat po Sir!🤗
Godbless.

[@georgemontanio8126]

Lack of PPE

[@diyweekendwarriors5373]

Nice

[@eroyrhona]

Thank you so much😊

[@michaelasa8974]

Amazing

[@eroyrhona]

Thank you Pare Mike 👌

[@dswwks.youtube]

Gud job

[@eroyrhona]

Thank you so much Sir. 😃

[@rvh_2379]

Can you send me please all the tools you used in making that cabinet?

[@eroyrhona]

Circular saw
Jigsaw
Cordless impact drill
Orbital sander
Pocket hole jig
Hammer
Measuring tape
Clamps