That is actually pretty darn good. GPS is not exact and most commercial GPS units can only get you within a few Meters of a target. Job well done. I will be trying to put together one of these myself. Thank you very much for sharing the knowledge.
thank you for all of this work you have done.. i know it takes a lot of time. its people like us that really appreciate your effort...well done my man....
@EZtech I need your help. I have done everything step by step. I have made the circuit, and calibrated the compass, and uploaded the code. And did everything which you told in this video. But the problem is that, I never got any output whenever I press any button in the app. Even the connection is proper and code is properly uploaded, also compass has been calibrated perfectly but nothing works with the app, whenever I press any button.
maybe switch the battery with a new high power one. I had made a similar one and found that the battery was the real problem. And while doing this try not to bypass the arduino's regulator
Hi ! I uploaded the same code and made the same connections, but my robot it's not really going to the set point, is there something that i should check?
@@EZtech @EZtech I need your help. I have done everything step by step. I have made the circuit, and calibrated the compass, and uploaded the code. And did everything which you told in this video. But the problem is that, I never got any output whenever I press any button in the app. Even the connection is proper and code is properly uploaded, also compass has been calibrated perfectly but nothing works with the app, whenever I press any button.
Higher accuracy can be achieved using better GPS modules. You would need to modify the design to use a high precision GPS such as this. www.littlebird.com.au/products/ublox-gps-rtk-qwiic-neo-m8p-2
Hasan salman yes, although with the phone and Bluetooth module that I use I have never lost connection because of distance. I have used is more than 50 yards away.
@@EZtech @EZtech I need your help. I have done everything step by step. I have made the circuit, and calibrated the compass, and uploaded the code. And did everything which you told in this video. But the problem is that, I never got any output whenever I press any button in the app. Even the connection is proper and code is properly uploaded, also compass has been calibrated perfectly but nothing works with the app, whenever I press any button.
Good morning, my name is Nikos and I am writing to you from Greece , I would like to thanks first of all for your work and for sharing it with us and, , it is about converting the gps signal into a servo signal, and basically I'm interested in the locking of the coordinates at the activation point and the servo always pointing to the point where the coordinates are locked. this is a about fishing bait boat construction,,where the boat will return to the activation point,,I've already made it using an arducopter = ruclips.net/video/zuqRH8E35MA/видео.html but the arducopter it has many functions that i don't need and it is also quite a bit more expensive,,while I only need the function, of the return to the starting point. I quite understand arduino codes but I'm not that experienced ,,and I saw your project which looks very interesting,, Does it have the schedule that uses order for a return to the activation poind ? or do You have something else to suggest ?? thank you in advance .
You are just amazing man...
Superb work 👍
Look atleast you have shown an honest real-time example, I wonder if we can explore the concept of rover and base station
That's my plan!
Modify the design to use the NEO-M8P!
Wish me luck.
@@richardcarr3426 How did it go?
That is actually pretty darn good. GPS is not exact and most commercial GPS units can only get you within a few Meters of a target. Job well done. I will be trying to put together one of these myself. Thank you very much for sharing the knowledge.
TBH it's pretty accurate always within about 5metres which is about as good as you'll get really without compensation or use of other data.
U have to make a video on how to set a waypoints
ruclips.net/video/GnnFy0uFe3E/видео.html
thank you for all of this work you have done.. i know it takes a lot of time. its people like us that really appreciate your effort...well done my man....
@EZtech I need your help. I have done everything step by step. I have made the circuit, and calibrated the compass, and uploaded the code. And did everything which you told in this video. But the problem is that, I never got any output whenever I press any button in the app. Even the connection is proper and code is properly uploaded, also compass has been calibrated perfectly but nothing works with the app, whenever I press any button.
maybe switch the battery with a new high power one. I had made a similar one and found that the battery was the real problem. And while doing this try not to bypass the arduino's regulator
i have problem with servo, it says 'myservo' was not declared in this scope, anyone can help ?
Hello! I have the same problem. Did you not find a solution?
Hi ! I uploaded the same code and made the same connections, but my robot it's not really going to the set point, is there something that i should check?
hey sir, your app is not working, the gps screen is blank and no blocks are there plz give the real app, i have to submit the project
Has anyone encountered this issue? when I press the gps info button it shows me that my location is 5000+ km away from the robot. Any solution?
Does the gps needs wifi or internet connection to work?
No, it doesn't
need to ask...can this project be done by using arduino uno? and using L298n motor driver?
What is the totall price of this car
I detail everything you need to build it in the Instructable, link is in the description. I would say somewhere between 75 to 100 dollars.
@@EZtech @EZtech I need your help. I have done everything step by step. I have made the circuit, and calibrated the compass, and uploaded the code. And did everything which you told in this video. But the problem is that, I never got any output whenever I press any button in the app. Even the connection is proper and code is properly uploaded, also compass has been calibrated perfectly but nothing works with the app, whenever I press any button.
Can it travel anywhere in the world
how to add more waypoint please
How to set the waypoint
I was hoping to see 1cm accuracies with the ublox module as the ublox has GNSS
oldu mu?
Which GPS module to use for accuracy?
Higher accuracy can be achieved using better GPS modules.
You would need to modify the design to use a high precision GPS such as this.
www.littlebird.com.au/products/ublox-gps-rtk-qwiic-neo-m8p-2
can i use motor driver L298n instead?
hey i know its pretty late but yes! you can
i have a question ,if the location is out of Bluetooth connection, wont there be a problem?
Hasan salman yes, although with the phone and Bluetooth module that I use I have never lost connection because of distance. I have used is more than 50 yards away.
Hello sir It's working human following...?
can it go more way point?
how can i set way point by typing or setting?
Hasan salman yes you can add more waypoints
@@EZtech @EZtech I need your help. I have done everything step by step. I have made the circuit, and calibrated the compass, and uploaded the code. And did everything which you told in this video. But the problem is that, I never got any output whenever I press any button in the app. Even the connection is proper and code is properly uploaded, also compass has been calibrated perfectly but nothing works with the app, whenever I press any button.
Good morning, my name is Nikos and I am writing to you from Greece , I would like to thanks first of all
for your work and for sharing it with us
and,
, it is about converting the gps signal into a servo signal, and basically I'm interested in the locking of the coordinates at the activation point and the servo always pointing to the point where the coordinates are locked.
this is a about fishing bait boat construction,,where the boat will return to the activation point,,I've already made it using an arducopter =
ruclips.net/video/zuqRH8E35MA/видео.html
but the arducopter it has many functions that i don't need and it is also quite a bit more expensive,,while I only need the function, of the return to the starting point.
I quite understand arduino codes but I'm not that experienced ,,and I saw your project which looks very interesting,,
Does it have the schedule that uses order for a return to the activation poind ?
or do You have something else to suggest ??
thank you in advance .