New sub here … haven’t had an rc car for 25 years. Have been thinking about & looking at entry level rtr’s that I can grow with, for this exact level of tomfoolery as the endgame. 👍. Already was leaning towards the Mega Infraction, but now I’m convinced. Thank you sir.
Biggest motor I could put in mine is the Quicrun 4274. I bought the 8BL150 4274 6s Combo kit on Amazon from Hobbywing. She’s a ripper. I wish they had a subscription plan to have new tires shipped to me weekly just because I go through them so fast
@@therchotspot cool thanks! I only have 3s set up with a 1410 3900 kv castle motor and a sidewinder 4 esc but I’m a extreme basher so I shredded the stock plastic spur either to much power or my motor shifted and the spur and pinning came unmeshed partially. Hopefully some one makes a after market metal spur for it soon.
I heard rumor of it back when I first got the Infraction, but I haven't kept up with it since I got it working this way. I definitely went over kill for this rc but I love it
On 3s brushless mega I was getting arounnd 35-40 on the 57 tooth spur too...Then 50-60 on the 55 tooth depending on pinion...Then on a 50 tooth spur I got 70-80 depending on pinion...You probably would have hit over 100 on 6s with a 50 tooth spur
OK, Unless I am mistaken, doesn't the motor, 570 12T, that came with the truck have a 3.175mm shaft? But the 3900kv and most motors for 1/8 weight, have a 5mm shaft, So, the pinion gear must need to be changed also? Thanks
Lower kv motor. More torque, less speed. You can put whatever motor you want to in it. Ill drop a higher kv motor in it and it would be much faster. Knowing I was going to change the electronics either way made me buy this one because it was cheaper. The Vendetta and this Infraction are pretty much the same except for the electronics
New sub here … haven’t had an rc car for 25 years. Have been thinking about & looking at entry level rtr’s that I can grow with, for this exact level of tomfoolery as the endgame. 👍. Already was leaning towards the Mega Infraction, but now I’m convinced. Thank you sir.
Awesome! Thats what I do it for! Thanks for watching and subbing
Bruh, you seriously bout to get me into this stuff
Ill get you hooked up!
i just ordered one of these planning on making a speed basher hopefully it can match my 70+mph slash 2wd
I've been wanting one of these.. About to pull the trigger shortly..
Go for it! I love it so far
That look like fun bro….I got to get outside and play with my Infraction 6s some more 👍🏾💪🏾💯
I had too much fun! Now I gotta wait on some tires! Lol
sick !!!!!!!!!!!!!! straight roasted them tires lol
Yes sir! So much fun
Daaaaayummmm lol 😆
Lol!
Fun car and video!! Good job! 😀
Thank you!
Thats some good stuff
Thank you!
Awesome video man! I might buy this car for my little man (5 years old) and upgrade down the line. Looks like a nice platform to work on.
It is nice and easy to work on. I got my son a brushed granite that we converted to brushless now that he can handle it. Easy to do!
@@therchotspot Thats so Nice ! Keep it up brother
Thank you!
You definitely motivated me to buy one.. thanks for the video
Thank you for watching!
That thing is wicked bro!
Thanks! A ton of fun too!
what is the biggest size motor that you can put into the infraction?
Biggest motor I could put in mine is the Quicrun 4274. I bought the 8BL150 4274 6s Combo kit on Amazon from Hobbywing. She’s a ripper. I wish they had a subscription plan to have new tires shipped to me weekly just because I go through them so fast
You got money to burn bro… burn dem tyres …. Absolutely love the colour great vid ….
Nah I don't but I had to do it. Lol! Thank you!
That the way!
Thank you!
I got 2 castle copperhead on 1 blx from outcast on the other running vendetta spurs
Nice!
Hey what size motor shaft and pinion gear are you using
5mm and a 26t pinion I think. May be a 23t its been awhile
@@therchotspot whats the ratio is it a 32p or mod 1
32p
Great run dude....looking fast💪
Enjoy my friend
Thank you!
Awesome 😎 I think maybe it would have been a little faster it you warm up the battery
Possibly! Ill try that
So what exactly do I need to buy to get a steel spur gear in this truck?
All my parts were out of my Typhon 3s. So the slipper setup, center drive shaft and center brace is what I added
@@therchotspot cool thanks! I only have 3s set up with a 1410 3900 kv castle motor and a sidewinder 4 esc but I’m a extreme basher so I shredded the stock plastic spur either to much power or my motor shifted and the spur and pinning came unmeshed partially. Hopefully some one makes a after market metal spur for it soon.
I heard rumor of it back when I first got the Infraction, but I haven't kept up with it since I got it working this way. I definitely went over kill for this rc but I love it
@@therchotspot yeah man it looks like a blast!well if you run across it send the link it would be greatly appreciated!
On 3s brushless mega I was getting arounnd 35-40 on the 57 tooth spur too...Then 50-60 on the 55 tooth depending on pinion...Then on a 50 tooth spur I got 70-80 depending on pinion...You probably would have hit over 100 on 6s with a 50 tooth spur
What's that drive shaft holder bearing part?
Ar310878
@@therchotspot thx
@@therchotspot I got a 3s 3300kv motor and I'm going to use a 20 tooth pinion. I hope that goes about 45 - 50 ish.
It should no problem
Did you change the diff fluids? Or are you running stock?
I took the stock diffs out and put in Arrmas steel gear transmission set. But I did not change the fluid that is in there which is 10000cst
@@therchotspot Thanks bud, I’m gonna try 10k F/R first and go from there. 🤙
I put 6s in mine and rip the spur gear apart 😆
Lol! I didnt even try with that spur gear. I just went ahead and put my Typhon 3s setup in it with a steel spur
Thanks for watching my video man! Big fan of yours, watch your stuff all the time!
@@therchotspot thanks man. That 6s can be killer on this car lol but it's also fun to do it. And I also heard the laughter in your voice as well.
Oh yeah I was having a ton of fun with it!
Did you convert your motor shaft to 5mm on the new motor?
It came with a 5mm shaft. Didnt change anything
I r phrased it wrong, the car came with 3.175 shaft, correct? So did you crave the same size gear with a 5mm shaft?
Thanks
Still not sure what you are asking but I have pinion gears that fit 5mm so I just used those.
OK, Unless I am mistaken, doesn't the motor, 570 12T, that came with the truck have a 3.175mm shaft? But the 3900kv and most motors for 1/8 weight, have a 5mm shaft, So, the pinion gear must need to be changed also?
Thanks
sorry, 570 9T
Those tyres seem to have no tread on them sir.!.. Don't you realise that driving with bald tyres is an INFRACTION.!!??😉
🤣🤣🤣🤷🏾♂️
Why is it so slow? 😂
My 1/12 brushless wl toys buggy is faster out of the box then this thing.I will go with the Arma vendetta.
Lower kv motor. More torque, less speed. You can put whatever motor you want to in it. Ill drop a higher kv motor in it and it would be much faster. Knowing I was going to change the electronics either way made me buy this one because it was cheaper. The Vendetta and this Infraction are pretty much the same except for the electronics
It's called the "mega" and yet isn't as big or powerful as the original... Marketing needs to lay off the sauce
You not wrong...