The gearbox is Pre Select and uses a fluid flywheel , start in neutral and warm up , select forward or reverse and then select 1st gear, push and release the gear change pedal and accelerate , select the next gear and then push the gear change pedal when ready and so on up the gears , same down changing pre select the gear then use the gear change pedal. It will travel at the same speed in reverse as it does forward
The Dingo is in such a nice condition, I'm surprised it was made in 1942. I know you're going to do a great job on it, and the customer will be very happy.
sounds like the carb just wants cleaning, if you look at the top of the carb there is a small plate with 2 screws, underneath that should be the emulsion tube unscrew that and you will need a wire to poke down the centre of the small tube i expect there is some corrosion at the bottom of the tube. i know this because our dingo does the same thing when its blocked it becomes unresponsive and dies when you blip the throttle, i cleaned the carb and it runs perfect.
The gearbox is Pre Select and uses a fluid flywheel , start in neutral and warm up , select forward or reverse and then select 1st gear, push and release the gear change pedal and accelerate , select the next gear and then push the gear change pedal when ready and so on up the gears , same down changing pre select the gear then use the gear change pedal. It will travel at the same speed in reverse as it does forward
Fantastic video 😊 love the dingo 👱🏻♂️🐶
The Dingo is in such a nice condition, I'm surprised it was made in 1942. I know you're going to do a great job on it, and the customer will be very happy.
sounds like the carb just wants cleaning, if you look at the top of the carb there is a small plate with 2 screws, underneath that should be the emulsion tube unscrew that and you will need a wire to poke down the centre of the small tube i expect there is some corrosion at the bottom of the tube.
i know this because our dingo does the same thing when its blocked it becomes unresponsive and dies when you blip the throttle, i cleaned the carb and it runs perfect.
Thankyou so much for that information I’ll be trying that first thing in the morning, thanks for watching!
It’s not a clutch, it’s a gear change pedal. It should be pressed and released, don’t keep your foot down on it
You and Lana in a Dingo is something i never thought i would see 😂
😂😂
I Sounds Like The Idle Jet Is Clogged 👍🏻🌲🌲🌲🌲
I think you’re right!
The struggle of trying to get into that drivers seat was too much for me 😂😂
😂😂
Ideal for the Tesco's carpark.
Even space for shopping bags!
My mate got a dingo lives in Alsager Cheshire just recently restored it
Nice! You don’t see many about
I have plenty of spare parts if you are interested
I need that to go get the mail at the end of my driveway!😂😂
😂😂
An underrated recon vehicle😎💪🏼
Under rated by who ?
never ever ever keep your foot on the clutch pedal !!!!
sounds like it has a fuel issue. maybe air getting in somewhere
😂😂😂 i think i have one of these in my matchbox collection
Same! 🙌😂