Building An American Sloop Half Hull Model
HTML-код
- Опубликовано: 14 апр 2019
- This is a description of a carving I did of an early American Packet Sloop half hull model. This video only details the work up to the stage of the beginning carving. My other half hull video (link at end of this video) shows more of the finish work on a clipper ship half hull model.
Visit my website at: www.edwardmaterson.com
One of the best videos on RUclips for half hull carving:
• Cat Boat Half Hull by ...
I agree! One of the best half hull demonstrates I’ve seen on you tube.
Thanks so much for this video, Edward! After having purchased our first wood boat last year (1984 Skiff Craft) I'm planning to make half hulls of our boat and the 1955 Chris Craft Commander my grandfather owned. It's one thing to read about how to make a half hull, but another thing entirely to see a master like you at work. Thank you for taking the time to explain the art of making half hulls and for helping another generation keep such a beautiful tradition alive.
Thank you Blake. There are others on RUclips who have greater skills than mine but it is nice to be referred to as a "master".
cool stuff! thanks
very cool.. amazing
Muito bom amigo ,otimo trabalho . e disto que os novos modelistas nessesitam . forte abraco de portugal
Thank you Jorge. We were in Lisbon some years ago and loved it.
Great video! We recently purchased an antique (ca. 1830) house on Cape Cod formerly owned by Captain Harding Cobb. He operated at least two packet ships between the Cape and Boston. I’d very much appreciate learning how to obtain the plans for a packet sloop featured in your video as I hope to carve a packet sloop half hull model for our house. Thanks!
William:
The plans I used were enlarged from Howard Chapelle's "American Sailing Craft" if I remember correctly. Sorry for the delayed response.
EM
William:
The book I mentioned was not the correct one. It should have been "The Search for Speed Under Sail" Howard Chapelle, Bonanza Books.
Beautiful work! Particularly love the Bawley you carved. Where did you find the plan for that particular shrimp boat? Thanks for sharing this!
Todd
Thanks for the comment. Don't check these often enough. Regard to the plans I have to stop and think. Have so many books and stuff and I did that some time ago. If I can track them down I will post them for you
todd: I found the plan. I will add it to the video.
Negative. Will send them via email if you like.
@@edwardmaterson3646 how should we do this so I don’t publish my email address on RUclips? I would very much appreciate the plans.
@@toddelliott3239 If you go to my Pinterest page you will find it under Boat Plans
Dear Mr. Masterson, how can you be reached directly. I am interested in making full models. Can you assist me with this. I would truly appreciate your help. Your video was very good.
Shawna:
You can create a full model hull if you can make a half-hull model. All it takes is to flip the patterns and use wider stock.
If you trace an innere profile on each template and cut along those lines you can create a hollow full hull.
Christopher Hale has a video on his full models and there are many others. Also, Dover books puts out a few reasonably priced books on model making. Harold Payson has an excellent book on model making but he had a full boat-making shop and many of the tools few people own. You can do it though with the simplest tools a jigsaw (hand) costs less than $10 at some stores Chisels should be the best quality but you can get by with one or two.
Hope this helps.
Correction: Christopher Hale's video is about half-hulls but there are many full model making videos on RUclips.
Hi I would like to build this boat where can the blue prints you have be purchased?
Hi Sam, sorry I had not checked this site sooner. The plans are from Howard Chapelle's American Sailing ships, if I remember correctly. In any case it would either be that or The Search for Speed under Sail, same author. I simply photocopied the plans and blew them up to the desired size. You can paste them together if you don't have a larger print capability. Some times I just make a same size copy and bring it to a local print establishment where they can usually enlarge them for a pretty reasonable fee. Hope this helps.
Edward I cant find the link to the finished carving.
AK Murray:
Very sorry to take so long responding. I should check this more often. In any case if you are still interested I will try to attached a clip of the finished carving to a new short video.
EM
J,aimerais beaucoups voir le resultat final , to do the same ill use a grinder for the rough,yes,its noisy . hellofrom gaspesian peninsula
Sorry for the long wait to respond. I need to check my comments moe often.
I am going to try to add a small video of the finished carving.
EM
You need a draw knife!
Mike
I have a drawknife but don't find it as comfortable to use.
EM