- Видео 27
- Просмотров 72 080
Edward Materson
Добавлен 13 мар 2018
Видео
Head Sculpting with Sculptris (roughing out the beginning stages)
Просмотров 44Год назад
This is a head I sculpted In a very short time using the Sculptris 3d modeling application (Pixologic). The app is free and quite intuitive. As a tradional professional sculptor it is amazing how much it resembles sculpting wiht modeling clay. The video is in real time so I guess it took a little over 10 minutes to get this far. From here there are obvious corrections I would make, including so...
An experiment in Sculptris...created a male figure in Sculptris
Просмотров 19Год назад
This is a male figure created from imagination and memory. Details of hands and feet have not been completed.
An experiment in Sculpris...created a head from imagination
Просмотров 35Год назад
This is the result of experimenting with Sculpris, a free app (or at least it was) which I think is an offshoot from Z brush, 3d modeling app.As a traditional sculptor accustomed to modeling and carving there are features very similar to what I know and others which are quite alienating.
Fur Elise by Beethoven (almost)
Просмотров 37Год назад
After several hundred attemps I finally more or less learned the first few bars of Beethoven's "Fur Elise". Played on my $115 Donner 61 key keyboard piano. Don't know where the annoying background sounds are coming from. They are only on the recording. Check out the source teacher I used, Dr Steve Warner. Many videos on his channel Incidentally, yesterday, after seven months of playing, the C n...
Cycling in Fog
Просмотров 432 года назад
A very short video I did some years ago shortly after I retired.
A homemade steam engine from a kit. It works! Steam engine I made from a kit.
Просмотров 512 года назад
Made this from a kit. Surprised to see it actually works. Not perfect but a fun satisfying project.
American Packet Sloop Finished
Просмотров 5132 года назад
This is a simple video showing the finished American Packet Sloop Half Hull Model
This is a short video I took at Bowdoin College Campus in the evening.
Просмотров 1123 года назад
This is a short video I took at Bowdoin College Campus in the evening.
Making a Half Hull of a Casco Bay Hampton Boat.
Просмотров 1,4 тыс.3 года назад
this video shows how I made a half hull model of a Casco Bay Hampton Boat using vertical lift profiles. It is essentially the same as making one using plan view templates. The actual carving is not covered but is similar to that in my previous vide (link included on end screen).
Third Dinghy Build Part 2
Просмотров 523 года назад
This is my 7 plus foot dinghy at the stage just before painting. Unfortunately the winter is closing in here in Maine and I will have to cover it up and wait for Spring to finish it. It has been fun (except for the fiberglassing) and in the future I will just tape the seams and use good marine plywood and paint. The $22 a sheet plywood I used seems well made. I had a piece floating in my backya...
My Third Dinghy Build (with voice over)
Просмотров 2063 года назад
This is a short video of the most recent boatbuilding project I am working on. It is a plywood dinghy similar to one I built years ago with a few minor changes. I have prepared a mast step hole (not yet fully finished) so I can use it as a sailing dinghy. The seats are removable for maintenance. Plywood is sustainable plantation wood ($22 a sheet at Home Depot). I am testing a small piece for d...
My Third Dinghy Build
Просмотров 823 года назад
This is a short video of the most recent boatbuilding project I am working on. It is a plywood dinghy similar to one I built years ago with a few minor changes. I have prepared a mast step hole (not yet fully finished) so I can use it as a sailing dinghy. The seats are removable for maintenance. Plywood is sustainable plantation wood ($22 a sheet at Home Depot). I am testing a small piece for d...
Clock Escape Mechanisms
Просмотров 37 тыс.4 года назад
A very short video of a couple of clock escape mechanisms I made a few years ago. Just experimental as a by-product to my long time interest in clocks. Something about a clock..."like a clock ticking in a thunderstorm" I read somewhere...the order, the calm, the sense of logic when the world seems anything but.
The Sea Never Changes...
Просмотров 674 года назад
This video was made yesterday (March 24, 2020). It was the day after a storm and the seas were still high. It reminded me of the Joseph Conrad quote: "The seas never changes and its' works, for all the talk of men, are wrapped in mystery". My apologies for the inexpert videography and the spot on the right side of the screen. Making movies is not my day job, in fact, I don't have one.
Small Antique Printing Press Restoration
Просмотров 2,1 тыс.4 года назад
Small Antique Printing Press Restoration
Legend of the Silkie; the creation of a figurative sculpture
Просмотров 2894 года назад
Legend of the Silkie; the creation of a figurative sculpture
Building An American Sloop Half Hull Model
Просмотров 13 тыс.5 лет назад
Building An American Sloop Half Hull Model
Sir, irá the pendulum's movement exact or does it lose accuracy as the traction loses strength?
very cool!
I agree! One of the best half hull demonstrates I’ve seen on you tube.
Very nice
cool stuff! thanks
Cool
Braves
Hi I would like to build this boat where can the blue prints you have be purchased?
Hi Sam, sorry I had not checked this site sooner. The plans are from Howard Chapelle's American Sailing ships, if I remember correctly. In any case it would either be that or The Search for Speed under Sail, same author. I simply photocopied the plans and blew them up to the desired size. You can paste them together if you don't have a larger print capability. Some times I just make a same size copy and bring it to a local print establishment where they can usually enlarge them for a pretty reasonable fee. Hope this helps.
ρяσмσѕм ?
The bevels on the first one face the wrong way it only works because you got lucky
The first is fine. The second one is backward. The teeth point into the pallets, not away.
Supper Job
Muito bom amigo ,otimo trabalho . e disto que os novos modelistas nessesitam . forte abraco de portugal
Thank you Jorge. We were in Lisbon some years ago and loved it.
Great video! We recently purchased an antique (ca. 1830) house on Cape Cod formerly owned by Captain Harding Cobb. He operated at least two packet ships between the Cape and Boston. I’d very much appreciate learning how to obtain the plans for a packet sloop featured in your video as I hope to carve a packet sloop half hull model for our house. Thanks!
William: The plans I used were enlarged from Howard Chapelle's "American Sailing Craft" if I remember correctly. Sorry for the delayed response. EM
William: The book I mentioned was not the correct one. It should have been "The Search for Speed Under Sail" Howard Chapelle, Bonanza Books.
You need a draw knife!
Mike I have a drawknife but don't find it as comfortable to use. EM
J,aimerais beaucoups voir le resultat final , to do the same ill use a grinder for the rough,yes,its noisy . hellofrom gaspesian peninsula
Sorry for the long wait to respond. I need to check my comments moe often. I am going to try to add a small video of the finished carving. EM
Edward I cant find the link to the finished carving.
AK Murray: Very sorry to take so long responding. I should check this more often. In any case if you are still interested I will try to attached a clip of the finished carving to a new short video. EM
Hello Edward Materson, really great video, I saw your last video part 1, really have made a lot of progress since then, will you be releasing a launching video to show it in demonstration? I would really like a video like that. I have recently started repairing/building boats with my first video being released today, you're more than welcome to have a look, possibly suggest how I could improve things? Thanks Tom
I'm impressed that you made an ink plate from scratch, and the linkage that moves the roller arms. Looks like you could straighten that roller linkage just a little - the roller usually travels further up the ink plate. See my video at about 10:10 to see this same press in action: ruclips.net/video/6gQasrMBALA/видео.html (BTW, the "platen" is the place on the press where the paper goes.)
JIm: Yes, you are correct about the terminology. Don't know why I referred to it as a "platen" since I am well aware of the usual reference to that part. I had to experiment with the linkage and was aware that it could be better but just felt I had invested enough time. I had no part to replicate so had to use trial and error. Anyone with machine tools could do a better job of course. Anyway, thanks for your interest.
Beautifully executed.
Where do you get your plans for the boats?
Plans are available in many places: Books, Magazines, Museums, etc. This particular plan was enlarged from Howard Chapelle's, "American Small Sailing Craft", available through Amazon and used books dealers.
B
Excellent! Thanks for sharing, very inspiring and I hope to get a bench vice or the like soon, to start on mine. Cheers,
Beautiful work! Particularly love the Bawley you carved. Where did you find the plan for that particular shrimp boat? Thanks for sharing this!
Todd Thanks for the comment. Don't check these often enough. Regard to the plans I have to stop and think. Have so many books and stuff and I did that some time ago. If I can track them down I will post them for you
todd: I found the plan. I will add it to the video.
Negative. Will send them via email if you like.
@@edwardmaterson3646 how should we do this so I don’t publish my email address on RUclips? I would very much appreciate the plans.
@@toddelliott3239 If you go to my Pinterest page you will find it under Boat Plans
Beautiful 💙. A classical, traditional touch would have been to add stumps of the masts and maybe bowsprit.
Wow looking great!
Wow.. how amazing.. how cool! I want to build one now!
So the lifts have to be planed/thicknessed to represent the scale distance between the water lines on the plans? Have I got that right? Great video and model thanks.
Yes. Not having a thickness planeer I use 3/4" stock lumber. It is possible to create your own lift lines but takes a bit of work. Since you have the coordinates of the half breadth and the station lines you can bend a batten along the appropriate points and create new lift lines.
Wow, that's fantastic! Would love to see the build process, that looks like a fun project!
Thanks so much for this video, Edward! After having purchased our first wood boat last year (1984 Skiff Craft) I'm planning to make half hulls of our boat and the 1955 Chris Craft Commander my grandfather owned. It's one thing to read about how to make a half hull, but another thing entirely to see a master like you at work. Thank you for taking the time to explain the art of making half hulls and for helping another generation keep such a beautiful tradition alive.
Thank you Blake. There are others on RUclips who have greater skills than mine but it is nice to be referred to as a "master".
very cool.. amazing
Wow, that is fascinating!!!!
Very cool!
wich book?
"Typhoon" Chapter 2
Dear Mr. Masterson, how can you be reached directly. I am interested in making full models. Can you assist me with this. I would truly appreciate your help. Your video was very good.
Shawna: You can create a full model hull if you can make a half-hull model. All it takes is to flip the patterns and use wider stock. If you trace an innere profile on each template and cut along those lines you can create a hollow full hull. Christopher Hale has a video on his full models and there are many others. Also, Dover books puts out a few reasonably priced books on model making. Harold Payson has an excellent book on model making but he had a full boat-making shop and many of the tools few people own. You can do it though with the simplest tools a jigsaw (hand) costs less than $10 at some stores Chisels should be the best quality but you can get by with one or two. Hope this helps.
Correction: Christopher Hale's video is about half-hulls but there are many full model making videos on RUclips.
Hi, where can I get the plans?
The source for the plans is included in the video at about the 19 second mark. The Dover book:"Building Model Ships", 1998, includes full-size patterns.
Afteer searching online I did not find this book available any longer.
I guess the same method can be used for a full hull model except you do two sides.
Thomas: Yes, the same method can be used juste by flipping the templates of the "lifts" and tracing the mirror image onto your stock. Also, to create a hollow model, draw parallel lines an inch or two inside each lift profile (enough to leave room for glueing the lifts together).