Wow, I am truly impressed with your ability to explain complex concepts in a clear and practical manner. I have been a loyal follower of your channel for over six years now, and I continue to be amazed by the quality of your content. Thanks to your videos, I have learned how to effectively use Revit, and every time I encounter a new challenge, your channel is always my go-to resource. I would like to express my sincere gratitude to you for providing such valuable educational content. Wishing you all the best!
Thanks for this helpful and useful video, But you don't explain how to change connection of Single Rail to Baluster, for example how connect Rails 3,4 to Middle Baluster ?
Thank you for this explanation. Could you elaborate on the *landing adjustment* height for, say, 900mm flight and 1100mm landing railing for railing where baluster/spindles are attached to the "bottom rail" and "top rail" not to the *host*? It seems Revit does adjust all rails leaving a 200mm gap between the bottom rail and the landing, making it non-compliant
Please show what to do when the railing is still not correct after following all these steps, my railing is almost perfect but at my last landing it doesn’t follow the angle of the stair but just continues straight.
Your videos helped me a lot. I also want to become a BIM. Can I ask you one question? Which bachelor or degree should have to become a BIM. I'm having trouble picking majors right now.
I have a question..how to fix stairs rail from level 1 not connected with rail on level 2..i mean in my situation..level 2 i want to make rail as a guard from falling down from second floor to first floor..the rail should connected with stairs hand rail but sadly..it not
Nicely explained. The Revit programmes with the support of their authority should make it easier for us. Still too complicated and too many things to remember. Honestly stair railings specially curved multi landing stairs take more time and brainstorming than designing the whole building! That is really a waste of time and energy!
Hello Balkan , I have an off the topic question that only the master of Revit can answer. I am trying to incorporate PCM materials in a building , is there any way i can do it OR insert temperature dependent properties for materials
Wow, I am truly impressed with your ability to explain complex concepts in a clear and practical manner. I have been a loyal follower of your channel for over six years now, and I continue to be amazed by the quality of your content. Thanks to your videos, I have learned how to effectively use Revit, and every time I encounter a new challenge, your channel is always my go-to resource. I would like to express my sincere gratitude to you for providing such valuable educational content. Wishing you all the best!
This is by far the best video on thissubject on youtube. I've watched many, but noone came close.
I love all your explanations from which I learn a lot
Excellent video!! It was exactly what I was needing for the project I'm currently working on. Thank you so much.
I am learning Revit using your contents, you are god gifted and wish you all happiness in life.
Excellent explanation, thank you !!!!
I learnt one thing but thats one more than i did so its very much worth it thanks.
You are genius DADA!
Thanks, this helps me out a lot!
i humbly thank you brother
Thanks bro!
thanks for what you´ve done.
በጣም አመሰግናለው ተባረክ።
Eu aprendi muito com esta explicação... aula sensacional... gratidão
Thank you so much
PERFECT
Merci bcp balkan
Do one about curved walls found in Shingle style homes
Good idea, I will look into that! :)
Thanks for this helpful and useful video,
But you don't explain how to change connection of Single Rail to Baluster, for example how connect Rails 3,4 to Middle Baluster ?
Why won't Revit load any of the balustrades on file? All I get is a handrail floating above my balcony
Thank you for this explanation. Could you elaborate on the *landing adjustment* height for, say, 900mm flight and 1100mm landing railing for railing where baluster/spindles are attached to the "bottom rail" and "top rail" not to the *host*? It seems Revit does adjust all rails leaving a 200mm gap between the bottom rail and the landing, making it non-compliant
How about the BALUSTER MATERIAL? PAINT?
how would you do handrail for modern luxury homes where the handrail his located in a cut in the wall
thanks be to God
Please show what to do when the railing is still not correct after following all these steps, my railing is almost perfect but at my last landing it doesn’t follow the angle of the stair but just continues straight.
Super didácticos los videos
Your videos helped me a lot.
I also want to become a BIM.
Can I ask you one question?
Which bachelor or degree should have to become a BIM. I'm having trouble picking majors right now.
I have a question..how to fix stairs rail from level 1 not connected with rail on level 2..i mean in my situation..level 2 i want to make rail as a guard from falling down from second floor to first floor..the rail should connected with stairs hand rail but sadly..it not
Nicely explained. The Revit programmes with the support of their authority should make it easier for us. Still too complicated and too many things to remember. Honestly stair railings specially curved multi landing stairs take more time and brainstorming than designing the whole building! That is really a waste of time and energy!
Support railing. Which one family name you made from ?
Good 👍
How to change material of Balusters
how to add a new profile in rail?
I want to know as well. I try to load a family, and it won't load
Hello Balkan , I have an off the topic question that only the master of Revit can answer. I am trying to incorporate PCM materials in a building , is there any way i can do it OR insert temperature dependent properties for materials
7:45
🙏🙏🙏🙏🙏🌸🌸