Thank you for making one of the only piece of content i could find comparing conductonaut and conductonaut extreme Youre very knowledgeable and good at explaining what you do and why you do it You've earned a sub from me!
Everyone is like "it will dry out after 1 year" but I delided my old i5 like 5 years ago and used some cheap liquid metal (not thermal grizzly) and it still works absolutely fine after years.
@@DiabloSsj3 nickel plated is best. Copper will be fine, but some of the gallium will seep into it and I have never heard of or personally experienced issues with using it with copper heatsinks. I find it amusing when people say not to use copper, yet people are delidding their CPUs and replacing the OEM heat spreader with a copper one, and using Liquid Metal between the die and the heatsink. People like to fear monger and spread misinformation. Always do additional research and get more than one opinion.
How long ago did you applied the original conductonaut before running the first test you've showed? Can you run the same test on the aged conductonaut extreme?
Hello sir thank you for your video ; i'm french and i have some problems to understand all. Quickly can we say the Conductonaut Extreme is better than the Conductonaut (normal) version ?
Exactly what I was looking for, Thanks for the video ! Was doing some research and I cant wait to have it and start testing it on my 3080 with custom loop.. probably will shuntmod the card when disassemble it. Pretty sure will see much wider gap in temps overall :D Subbed !
Thank you for this video. I just bought some Conductonaut Extreme for the new system I'm building. The information on Thermal Grizzly Conductonaut Extreme appears to be relatively sparse. I was considering just using it for my new CPU, but now you've convinced me I should also try this with my new GPU.
Just curious, the red spot on the left index finger, is that from soldering iron or delidding razor, or something else? Also thanks for the Liquid metal application advice.
My laptop actually came with the Conductonaut Extreme applied in the CPU But this time when i repasted the cpu i did it with Conductonaut but Not the Conductonaut Extreme so is it bad does affect my laptop???? please answer
This is the material here and the link to where I buy it from here in Norway: www.vpg.no/Swix-Fibertex-Violet/127225/?gad_source=1&gclid=Cj0KCQiAkeSsBhDUARIsAK3tiecqxoPiRnO6X893DSMYotLRFiz_ZycayCt06BT3Rj30RsRNJWKx1AkaAhwzEALw_wcB
@@wwecomedy9125 This was not after 30 minutes, 15:07 was after 30 minutes. Conductonaut Extreme had same temperatures, but allowed to boost a little bit higher.
definitely do not recommend, almost killed my rog scar 15 2021 with rtx3070 and 5900hx, why? A:) because it's my first time applying liquid metal B:) i applied a little too much C:) no it did not cross over the sponge and silicon barrier made by asus, but i overestimated the silicon made by asus, the liquid metal managed to pass through under the silicon where there is some gap that it reached the small transistor in the cpu area, so it shorted and it does not boot only have rgb and leds luckily i cleaned few times and it booted up again after scraping the silicon barrier off and revealed the liquid at the transistor of cpu, it does not worth the risk and hassle for me, thermal paste like artic mx6 has far longer life span and is safe and easy to apply
Hello, it is a great video. Thanks for your efforts. You don't understand the difference between Thermal Grizzly Conductonaut vs Conductonaut Extreme. I am using 14700K and Noctua D15S, which one do you recommend? By the way, I won't do any evidence. Will it help if I apply thermal paste?
could you try applying it to a non-delidded cpu to see if it has the same cooling effect as on the gpu? Also, if you advise against using the small liquid metal application tip, how do you advise to apply the liquid metal? Good video otherwise and thanks for making a review on thermal grizzly conductonaut extreme!
I covered my recommended way of applying the liquid metal in the video. Perhaps your skipped it? As far as applying it over a CPU IHS, yes it will have a good effect. But it is more risky as the odds are higher that the liquid metal could spill over other components, like your GPU.
my 5950x and 3080ti have had a 2 year old liquid metal application. still running strong. going to replace it with the extreme stuff to see how it handles. curious to see how it handles colder temps though. if the device is off. it would freeze.
I do not include anything pink in the video. If you mean the purple stuff over the SMD's, that is nail polish used to protect from any liquid metal run.
At 23:30 you have a little jar of pink stuff that you proceed to spread about the processor. I'm not talking about the protective coating on the sides.@@TechnologyHive
@@TechnologyHive Ok, thanks for clearing that up as I thought it was only a 2 product comparison. You wouldn't happen to know any in-stock sources of copper IHS for 14th Gen Intel would you? I've never really considered LM before but after watching good videos like yours I'm actually excited to try it. Also need a contact plate from what I've seen on here. I knew the install felt wrong with the insane amount of pressure to latch down the CPU.
@@JC-cs2gs Why not just lap the stock IHS? It is just nickel-plated copper after all. Once you lap it, it will give you same or better results as any other copper IHS. But if you insist, you can buy them here: rockitcool.myshopify.com/products/copper-ihs-kit-intel-12th-gen
Yooo free code! J/k thanks for the in depth coverage. I’ve lm’d my gtx 1070 i7 7700hq laptop, reapplied it twice and it’s fine. The copper has discolored, nbd. Still has aggressive fans and wouldn’t mind an update.
@@aip719 I would go with Kryonaut Extreme. You'd still get greater thermal transfer than the stock thermal paste, and you'd avoid the risk of damaging your components with gallium if something goes wrong.
@@TechnologyHive thank you very much for taking the time to reply and so fast its much appreciated 👍😊and do you see any problems with switching from liquid metal to thermal paste as well? Ps5 comes with liquid metal but not sure the quality of it but I have been have heating issues and will rather go with whatever will make the most improvements👍
@@aip719 If it comes with liquid metal, I'd stick to that. Conductonaut Extreme would be my choice if I had to choose. I do not want to give you bad advice, so I'd definitely stick to liquid metal. They most likely used it for a reason.
@@TechnologyHive I dont think it really made a huge differance between PTM7950, when playing Tiny Tina my GPU is 72-73 C on 150w and my CPU is at 62-64 C on 20W. I think with PTM it was 74 C on GPU I think? One thing I m sure is fan speed reduced on load.
Only problem with your video is actually RUclips. By putting the next video you "may" want to watch 10 seconds before you show the Graph and covering the results so no one can see/read them. Probably have done better by showing the graph with a transparent background, maybe? during the fly through at around 40.00 mins, while your doing your roundup/summary (2 minutes before the end).
you notice the difference mainly on cpu's that pull insane power like current gen intel. i put it on my 4090 thats mounted with an alphacool waterblock and somehow it does not scale at all, it's all in all maybe 5C cooler which does nothing, so basically not worth for gpu's
Liquid metal DOES NOT corrode copper. It fuses with copper and creates a stain, which is non-corrosive. In fact, this does not affect the thermal conductivity of copper whatsoever. This stain is harmless.
Hello, it is a great video. Thanks for your efforts. You don't understand the difference between Thermal Grizzly Conductonaut vs Conductonaut Extreme. I am using 14700K and Noctua D15S, which one do you recommend? By the way, I won't do any evidence. Will it help if I apply thermal paste?
I do not recommend liquid metal TIM's over cpu ihs. I would stick with paste. MX-6 would be my choice. You can also go with Kryosheet by Grizzly. Both are great products imo.
@@brenosilvabarros I do not recommend liquid metal TIM over IHS because the chances of a runoff are high. If this happens, and you have an M.2 SSD right below the CPU or a dedicated GPU, the liquid metal will spill over these and potentially kill them. I have had a few graphics cards come in for repair due to this same issue and this is not an easy repair. I would stick to using liquid metal TIM's over die's only. Like a de-lidded cpu or a GPU with a copper or nickel plated base heat sink.
Thank you for making one of the only piece of content i could find comparing conductonaut and conductonaut extreme
Youre very knowledgeable and good at explaining what you do and why you do it
You've earned a sub from me!
Thank you so much! I'm glad I could help 🙂
Everyone is like "it will dry out after 1 year" but I delided my old i5 like 5 years ago and used some cheap liquid metal (not thermal grizzly) and it still works absolutely fine after years.
They just don't know what they're talking about 👍🏼
It completely depends on what the material is of the CPU cooler.
@@AlaskanGamerGuy And what material is good for using liquid metal?
@@DiabloSsj3 nickel plated is best. Copper will be fine, but some of the gallium will seep into it and I have never heard of or personally experienced issues with using it with copper heatsinks. I find it amusing when people say not to use copper, yet people are delidding their CPUs and replacing the OEM heat spreader with a copper one, and using Liquid Metal between the die and the heatsink. People like to fear monger and spread misinformation. Always do additional research and get more than one opinion.
Key words "old i5"
Liquid metal is for high end high frequency processors not Dino CPUs
Thank you!
The really long format video is not popular but as general guide there are so many gems one can pickup from it beside only end results.👍🏻👍🏻
I appreciate the feedback! And thanks for watching :)
How long ago did you applied the original conductonaut before running the first test you've showed? Can you run the same test on the aged conductonaut extreme?
This was weeks apart. So not long.
Hello sir thank you for your video ; i'm french and i have some problems to understand all. Quickly can we say the Conductonaut Extreme is better than the Conductonaut (normal) version ?
Yes. In short, Conductonaut Extreme does perform better.
Thank you for comparison. This is the only video that i can find and it fits perfectly for my needs!!! (ordered extreme version for my laptop)
@@mahmutziyaahiskali I'm glad it was helpful 🙂
Exactly what I was looking for, Thanks for the video !
Was doing some research and I cant wait to have it and start testing it on my 3080 with custom loop.. probably will shuntmod the card when disassemble it. Pretty sure will see much wider gap in temps overall :D
Subbed !
It's good stuff. Surprised me. Thanks for watching, btw
Nice to see there's still improvements that can be made. I'll probably grab the conductonaut extreme with my upgrade
Thank you for this video. I just bought some Conductonaut Extreme for the new system I'm building. The information on Thermal Grizzly Conductonaut Extreme appears to be relatively sparse. I was considering just using it for my new CPU, but now you've convinced me I should also try this with my new GPU.
I'm glad the video was helpful. Thank you for watching!
Why not for CPU ??
@@Blooppenheimer Reread what I wrote.
After all these test, what is your favorite Thermal Paste for CPU's ? (not GPUs)
@Blooppenheimer As for thermal pastes, I'd stick to MX-6. Substitute would be Thermalright Heilos.
Just curious, the red spot on the left index finger, is that from soldering iron or delidding razor, or something else? Also thanks for the Liquid metal application advice.
That is actually from cooking LOL Thanks for watching btw! 🙂
My laptop actually came with the Conductonaut Extreme applied in the CPU But this time when i repasted the cpu i did it with Conductonaut but Not the Conductonaut Extreme so is it bad does affect my laptop???? please answer
I can't answer that for you. Sorry.
Any chnace you could give us a link to the material you used to polish the copper or at least the name it would be very much appreciated.Thanks
This is the material here and the link to where I buy it from here in Norway: www.vpg.no/Swix-Fibertex-Violet/127225/?gad_source=1&gclid=Cj0KCQiAkeSsBhDUARIsAK3tiecqxoPiRnO6X893DSMYotLRFiz_ZycayCt06BT3Rj30RsRNJWKx1AkaAhwzEALw_wcB
Which paste you use on 14:25 48c after 30 minutes
This was TG Conductonaut, the regular one, not the extreme version.
@@TechnologyHive is extreme is better than this
@@wwecomedy9125 Not by much. I'd stay with the original conductonaut.
@@TechnologyHive so original conductonaut is better than extreme
@@wwecomedy9125 This was not after 30 minutes, 15:07 was after 30 minutes. Conductonaut Extreme had same temperatures, but allowed to boost a little bit higher.
bro can we use this stuff also for laptop gpu and cpu?
I wouldn't recommend it for laptops or mobile devices as this stuff can run off with shock. But yes, you can use it. I just do not recommend it.
definitely do not recommend, almost killed my rog scar 15 2021 with rtx3070 and 5900hx, why?
A:) because it's my first time applying liquid metal
B:) i applied a little too much
C:) no it did not cross over the sponge and silicon barrier made by asus, but i overestimated the silicon made by asus, the liquid metal managed to pass through under the silicon where there is some gap that it reached the small transistor in the cpu area, so it shorted and it does not boot only have rgb and leds
luckily i cleaned few times and it booted up again after scraping the silicon barrier off and revealed the liquid at the transistor of cpu, it does not worth the risk and hassle for me, thermal paste like artic mx6 has far longer life span and is safe and easy to apply
I mixed Conductonaut and Conductonaut Extreme because out of Liquid metal for extreme. Any problem or same performance?
@@Tommy-jf6fr You won't notice a difference.
@@TechnologyHive Wow, fastest reply on RUclips! Thanks alot! Noted!
Hello, it is a great video. Thanks for your efforts. You don't understand the difference between Thermal Grizzly Conductonaut vs Conductonaut Extreme. I am using 14700K and Noctua D15S, which one do you recommend? By the way, I won't do any evidence. Will it help if I apply thermal paste?
could you try applying it to a non-delidded cpu to see if it has the same cooling effect as on the gpu?
Also, if you advise against using the small liquid metal application tip, how do you advise to apply the liquid metal?
Good video otherwise and thanks for making a review on thermal grizzly conductonaut extreme!
I covered my recommended way of applying the liquid metal in the video. Perhaps your skipped it? As far as applying it over a CPU IHS, yes it will have a good effect. But it is more risky as the odds are higher that the liquid metal could spill over other components, like your GPU.
my 5950x and 3080ti have had a 2 year old liquid metal application. still running strong.
going to replace it with the extreme stuff to see how it handles. curious to see how it handles colder temps though. if the device is off. it would freeze.
Let us know how it goes 👍🏼
I'm confused as to what the pink stuff is as it's different from the current lineup of LM products mentioned in the title. Can you please explain?
I do not include anything pink in the video. If you mean the purple stuff over the SMD's, that is nail polish used to protect from any liquid metal run.
At 23:30 you have a little jar of pink stuff that you proceed to spread about the processor. I'm not talking about the protective coating on the sides.@@TechnologyHive
@@JC-cs2gs That is Thermal Grizzly Kryonaut Extreme. It's a real good thermal paste. I covered in one of my videos.
@@TechnologyHive Ok, thanks for clearing that up as I thought it was only a 2 product comparison. You wouldn't happen to know any in-stock sources of copper IHS for 14th Gen Intel would you? I've never really considered LM before but after watching good videos like yours I'm actually excited to try it. Also need a contact plate from what I've seen on here. I knew the install felt wrong with the insane amount of pressure to latch down the CPU.
@@JC-cs2gs Why not just lap the stock IHS? It is just nickel-plated copper after all. Once you lap it, it will give you same or better results as any other copper IHS. But if you insist, you can buy them here: rockitcool.myshopify.com/products/copper-ihs-kit-intel-12th-gen
when i applied conductonaut extreme on my rog ally the score on nero went from 3300 to 3550 ! and temps lowered by 5 degrees !
Very good! Liquid metal will always be better TIM.
Thank you for making this wonderful video, friend.
You're welcome 😊
First time i am trying to apply metal paste.give me some precautions.
Don't get it over any SMD's or it will destroy your joints, and slowly corrode them away.
@TechnologyHive I have asus rog strix g16 laptop
Can i get your Instagram
Yooo free code! J/k thanks for the in depth coverage. I’ve lm’d my gtx 1070 i7 7700hq laptop, reapplied it twice and it’s fine. The copper has discolored, nbd. Still has aggressive fans and wouldn’t mind an update.
After the second application you should be ok. And I forgot about the code LOL
Wow, great video, you helped me a lot with this, thank you.
Thank you for watching!
Why did you limit the fan speed to 50% if you are measuring thermal performance? 100% fan speed would’ve shown the real performance of the TIM.
@@Enhancer1985 Who told you that?
nice to see Kryonaut extreme and conductonaut extreme compared
Sony managed to use gallium liquid metal without too much trouble in the PS5 APU.
Quite impressive.
I wonder if you got the PS5?
I do not own any consoles. All pc here 🙂.
@@TechnologyHive for ps5 in vertical way would you recommend conductnaut extreme or kryonaut extreme?
@@aip719 I would go with Kryonaut Extreme. You'd still get greater thermal transfer than the stock thermal paste, and you'd avoid the risk of damaging your components with gallium if something goes wrong.
@@TechnologyHive thank you very much for taking the time to reply and so fast its much appreciated 👍😊and do you see any problems with switching from liquid metal to thermal paste as well? Ps5 comes with liquid metal but not sure the quality of it but I have been have heating issues and will rather go with whatever will make the most improvements👍
@@aip719 If it comes with liquid metal, I'd stick to that. Conductonaut Extreme would be my choice if I had to choose. I do not want to give you bad advice, so I'd definitely stick to liquid metal. They most likely used it for a reason.
Conformal coating is what its called to cover the SMBs
I didn't know it had a name lol. Well, thanks for the info anyway.
I prefer to do nickel electro-plating on copper cold plate.
That would be nice to have the space and know-how for that.
I will apply this to my 3070 Ti laptop and see how it will make a differance.
Let's us know how it goes 👍🏼
@@TechnologyHive I dont think it really made a huge differance between PTM7950, when playing Tiny Tina my GPU is 72-73 C on 150w and my CPU is at 62-64 C on 20W. I think with PTM it was 74 C on GPU I think? One thing I m sure is fan speed reduced on load.
@@mertdundar7659 A quieter fan is typical with liquid metal or premium thermal pastes. Thanks for sharing this info!
42 minute... and you limited the power too much...
Only problem with your video is actually RUclips.
By putting the next video you "may" want to watch 10 seconds before you show the Graph and covering the results so no one can see/read them.
Probably have done better by showing the graph with a transparent background, maybe? during the fly through at around 40.00 mins, while your doing your roundup/summary (2 minutes before the end).
I'll go and take a look at that. It would defeat the purpose if you can't see the graphs.
Done. I hope that's better. Thanks for catching that.
you notice the difference mainly on cpu's that pull insane power like current gen intel.
i put it on my 4090 thats mounted with an alphacool waterblock and somehow it does not scale at all, it's all in all maybe 5C cooler which does nothing, so basically not worth for gpu's
5 degrees is not nothing.
That's HUGE for just changing thermal compound!
@@erack1 it doesn't give me any more core clocks tho so not worth
@@S4SK__1 fair, but it could ;)
Please don't scratch your cold plate, copper is soft
@@alexbuckenham1663 ?
Great video, thank you for the work.
Thank you for watching!
Thanks a lot. You did great work!
Thank you!
Copper radiator is NOT COMPATIBLE WITH LIQUID METAL and conductonaut extreme NOT COMPATIBLE with aluminium too!
conductonaut is the best, doesn't stick to the roof of your mouth like the other ones! :)
@Craftymang Well, I hope you're not swallowing it 😅.
The problem with liquid metal is that it corrodes aluminum and also copper , I would personally stay away from it , plus the risk of short circuit.
Liquid metal DOES NOT corrode copper. It fuses with copper and creates a stain, which is non-corrosive. In fact, this does not affect the thermal conductivity of copper whatsoever. This stain is harmless.
True copper stays intact , so you could probably get rid of the stain on copper with a polish product lol
@@sithounetsith9877 No. There is no need to polish it or sand it to try and removed the stain. Makes no difference, aside from esthetics.
There is a video of a 4 year test with liquid metal proving there is no corrosion.
Hello, it is a great video. Thanks for your efforts. You don't understand the difference between Thermal Grizzly Conductonaut vs Conductonaut Extreme. I am using 14700K and Noctua D15S, which one do you recommend? By the way, I won't do any evidence. Will it help if I apply thermal paste?
I do not recommend liquid metal TIM's over cpu ihs. I would stick with paste. MX-6 would be my choice. You can also go with Kryosheet by Grizzly. Both are great products imo.
@@TechnologyHive Hi. Why not?
@@brenosilvabarros I do not recommend liquid metal TIM over IHS because the chances of a runoff are high. If this happens, and you have an M.2 SSD right below the CPU or a dedicated GPU, the liquid metal will spill over these and potentially kill them.
I have had a few graphics cards come in for repair due to this same issue and this is not an easy repair. I would stick to using liquid metal TIM's over die's only. Like a de-lidded cpu or a GPU with a copper or nickel plated base heat sink.