It depends what you're looking for in a monitor! Both are great options but we have not done an in-depth comparison between the two. It would be worth checking the specs charts and cross referencing your preferred preferences! Sorry we don't have more information.
The higher the blue light filter, the less accurate it will be but BenQ has ensured that utilizing low blue light will still give you vivid colors. If you are doing a grade, we would recommend the lowest filter or no filter.
I bought the 27” one as a second monitor for my 27” iMac. Unfortunately the apple retina screen makes the Benq look dull and lifeless. Is there a set up trick I’m missing?
Hello! Depending on which iMac you are running and your current settings, the Apple retina screens tend to have a slightly higher pixel density than the BenQ monitors. BenQ also has a matte/anti-glare finish whereas Apple has a glossy, high-contrast screen but colors should render very similarly on both. We suggest doing a full color calibration with your BenQ as well as looking into your color preferences to dial it in.
Hi Hamad! The PD2725U is brighter, has 100% REC709, a higher power consumption, slimmer bezels, and more inputs/outputs (2x USB-C and HDMI 2.0). There are likely more differences but we have not gotten to use the PD2725U just yet. Hope this helps!
Hi Marcel, these two monitors do have the IPS glow. When it comes to the blacks being true black, we did not see a massive issue but this likely will come down to personal preference.
Hi Jan! We have tested it with a 2015 MacBook pro, a brand new MacBook pro with the M1 Chip, as well as the Mac Studio with no issues! That being said we have not done any in-depth testing but a few of our staff members use these monitors with MacOS every day. Hope this helps!
@@HuntsPhotoandVideo hopping in here because you mentioned using a 2015 MacBook Pro(which i currently use) with these. I've been looking at these screens and was wondering how they work with the older Intel Macs and what method you used to connect them. Also I want this to be able to handle a newer Mac that I may get in the next year or so.
We have only done very minor testing but from what we can see, the 4k scaling holds up. The Mac retina screens tend to have a higher PPI (163 roughly on the BenQ and 254 depending on the Mac you have) than these BenQ monitors so it's always best to go and test it out before purchasing. Hope this helps!
@@HuntsPhotoandVideo I purchased a usb typce-c to display port cable. I connected the type-c end to the usb type c at the bottom of the monitor and the display port to the graphics card (rtx 3090). The monitor could not seem to pick it up. It only picks up when I use a hdi to display port and dispaly port to display port cable
I got the benq pd2705U 4k but it seems dim and not as sharp as my iMac 27” .. is that how it’s supposed to be? When the review says the contrast and clarity is excellent, is this acceptable or is my monitor damaged?
Hi Jacqueline! It's difficult to say, the iMac displays are high quality and with their glossy finish, the contrast can appear higher. It also depends which iMac you have as they do offer a model with a higher resolution than the BenQ! The contrast and clarity of the PD27 is great but it does take some tweaking (in the settings) to get it properly calibrated to your exact setup. Hope this helps!
Sorry if it gets to you too late, but there's a way around the dim screen, which is activating the DualView through the Display Pilot 2 app (provided by BenQ). When you do so, the brightness surprisignly reaches a very high level (it's very consistent if you choose sRGB on both sides). I'm not sure why it happens and I'm reaching out to their support to make sense of it...
@@gurukripa266 I have bought the a second PD2705Q (UHD was too small for 27" for me). This PD2705Q also has a USB-C (charging + display) only. USB-C is different than TB. So, if you want daisy chain your Mac to PD and then via DP to another PD, you need TB (and I am not sure if the M1 or even M2 support multiple monitors over TB at all). Now I have one cable to my PD2700Q and one (incl power) to my PD2705Q, from my Mac. Its OK for me now and was not worth the cost of few hundred bucks more.
@@MountFX Great thanks. I want one of them to be PD2725U & the other one to be PD2705Q ... However I am concerned , will Daisy chain work or do both monitors need to have TB ports (missing in the latter)?
Hi, I am considering a purchase of a 4K monitor for my photography and video editing, my motherboard is ASUS M4A88TD-V EVO/USB3, can you recommend a suitable graphics, card to compliment. Thanks.
Hi John! Unfortunately, at this point we only sell monitors so specific computer component compatibility is a little out of our wheelhouse. We suggest contacting your local Micro Center (or local computer store) as they will be able to suggest the exact compatible units to go with your motherboard! Let them know what resolutions and maximum framerates you will be working with.
Hi Paul, Benq has two monitors that are specifically designed for mac (PD3220U and PD2725U). We have used the two monitors in the video with Windows 10-11 and didn't have any issues. That being said, we did not to any major testing, only general use so it might be worth contacting BenQ to get their full advice. Hope this helps!
Hello! It really depends on the lighting conditions in your workspace. For everyday indoor use, 250 nits is plenty bright. If you are working in a brightly lit area with heavy sunlight, it could pose an issue if not using in HDR mode. It comes down to preference!
2 года назад
Pretty Interesting, how will it compare with the LG 32” inch Ergo Ultrafine?
Hi Benjamin! Unfortunately we have not tested them against each other so we can only give you the minor differences in specs. As far as we can tell they differ in terms of color gammut (BenQ - 99% sRGB & 99% Rec. 709) (LG - 95% DCI-P3 & 95% CIE1976), weight (BenQ - 20.72lb) (LG - 34.1lb), and price! There are likely some more specific working differences but without a true test, it will be difficult to tell as they seem quite similar. Hope this helps!
2 года назад+1
@@HuntsPhotoandVideo it helps! Thanks for pointing those differences 🙏
I am searching for best monitor for Graphic design and video editing and came through this video.I just wanted to know does type -c or thunderbolt display or charge device.
Hi Zahid! The power is delivered to the monitor through a power cable (AC) and the USB-C can be used for power delivery to external devices, display or data.
Hi Jayant, unfortunately having not worked with the KVM switcher before, we can only give an educated guess but here is BenQ's KVM switcher page - www.benq.com/en-us/knowledge-center/knowledge/one-set-to-control-two-systems-with-kvm.html Hope this helps!
Great video 👌Epic Channel 😃 Congratulations. I really need your opinion: I'm interested in buying the BenQ PD2705U monitor, what do you think about this model, would it be a good buy? My fear and doubt is that it has 250 nits. Based on your experience, do you think 250 nits is enough? I'm going to use this monitor for web design, programming, and also for watching movies and shows. My office has a window that is usually open. The window is 4 meters away from the monitor. What is your opinion?
Thank you so much! It's difficult to say because it depends on the situation. For us, the PD2705U is great but we use them in controlled studio settings. They are plenty bright for us and display amazing color. If you are worried about any light spill, you can always get the hood but for the best results, a darker environment is the best option.
tbh, i never really understood the need for high nits displays. Ive got a max. 250 nits display and i work right next to a window with direct sunlight coming in.... and ive got my 250 nits monitor at 10% brightness haha :D
Hey I can't decide between this 27" Ben and the Asus PA279cv for my Mac. If I connect it with USB C what bandwitch will be left for the other usb ports ? Because it is not thunderbolt are the hub really useful to connect an external SSD or a soundcard for example ?
Hi Najib, it depends on your workflow. You do have access to 2 USB type B upstream ports (some audio interfaces and midi controllers will use this connection) along with the USB-C connection for your computer. It isn't a thunderbolt connection but BenQ has packed quite a few connectivity variations to choose from but it doesn't work for everyone.
@@HuntsPhotoandVideo Thanks for the answer, it's for a 14" M1 Pro so USB C is nice but I've read on the manuel that if I use it in 4k 60Hz the other usb ports will be just USB 2.0. Have I understood it correctly ? My soundcard is a MOTU ultra lite in usb C aswell.
Hi MrYong! We will only be able to give you some of the basic spec differences as we have not tested out the LG monitor. Some of the differences include color gamut (LG - DCP-P3 95% vs BenQ - sRGB 99%), the LG weighs about 2lbs more with the stand, and the LG has a greater swivel/tilt angle. Without a true test it will be hard to see some of the other working differences. We hope this helps! *This is for the BenQ PD3205U not the 27 as it has the same screen size.
@@HuntsPhotoandVideo my bad i was comparing the price of pd2725u to the 3205u which is a different model, may i know the difference between the pd2725u and pd2705u , Thank you !.
No worries! The PD2725U is brighter, has 100% REC709, a higher power consumption, slimmer bezels, and more inputs/outputs (2x USB-C and HDMI 2.0). There are likely more differences but we have not gotten to use the PD2725U just yet. Hope this helps!
Thank you for your kind response.
No problem! Thank you for your comment.
Great video! Keep up the great work and Greetings from Romania!🙂
Pd2700u vs pd 2705u which is best ?
It depends what you're looking for in a monitor! Both are great options but we have not done an in-depth comparison between the two. It would be worth checking the specs charts and cross referencing your preferred preferences! Sorry we don't have more information.
Hi Sridhar, Have you decided ? Because I want to know the Brightness satisfaction. Need to choose monitor
Do these work with M1 Macs without issue?
Hi Alex! Yes, they do. We have tested them with the new Macbook Pro as well as the new Mac Studio and they with no issues.
@@HuntsPhotoandVideo Is it just a crisper 1080p picture?
Can you color grading with the blue light filter on?
The higher the blue light filter, the less accurate it will be but BenQ has ensured that utilizing low blue light will still give you vivid colors. If you are doing a grade, we would recommend the lowest filter or no filter.
Is this a good monitor for graphic designers (print)?
Hi Claus. Both of these monitors will be great options or graphic design.
What set of cables come with PD2705U?
Hi Rajeev! This monitor comes with one power cable and one signal cable (DP1.4, HDMI 2.0, USB 3.0, USB C).
I bought the 27” one as a second monitor for my 27” iMac. Unfortunately the apple retina screen makes the Benq look dull and lifeless. Is there a set up trick I’m missing?
Hello! Depending on which iMac you are running and your current settings, the Apple retina screens tend to have a slightly higher pixel density than the BenQ monitors. BenQ also has a matte/anti-glare finish whereas Apple has a glossy, high-contrast screen but colors should render very similarly on both. We suggest doing a full color calibration with your BenQ as well as looking into your color preferences to dial it in.
Me too
Hi, whats the difference between pd2705u and pd2725u ?
Hi Hamad! The PD2725U is brighter, has 100% REC709, a higher power consumption, slimmer bezels, and more inputs/outputs (2x USB-C and HDMI 2.0). There are likely more differences but we have not gotten to use the PD2725U just yet. Hope this helps!
PD2725U has thunderbold 3 port while PD2705U has Type C with display alt and usb hub for data.
Is the black black or more greyisch?and the IPS glow?
Hi Marcel, these two monitors do have the IPS glow. When it comes to the blacks being true black, we did not see a massive issue but this likely will come down to personal preference.
is this a good monitor for macos considering possible schaling problems?
Hi Jan! We have tested it with a 2015 MacBook pro, a brand new MacBook pro with the M1 Chip, as well as the Mac Studio with no issues! That being said we have not done any in-depth testing but a few of our staff members use these monitors with MacOS every day.
Hope this helps!
@@HuntsPhotoandVideo hopping in here because you mentioned using a 2015 MacBook Pro(which i currently use) with these. I've been looking at these screens and was wondering how they work with the older Intel Macs and what method you used to connect them. Also I want this to be able to handle a newer Mac that I may get in the next year or so.
How does the 27" 4k work with Mac scaling?
We have only done very minor testing but from what we can see, the 4k scaling holds up. The Mac retina screens tend to have a higher PPI (163 roughly on the BenQ and 254 depending on the Mac you have) than these BenQ monitors so it's always best to go and test it out before purchasing. Hope this helps!
Is there 2 usb-c ports on this and could they both be used for video? No PiP just two different sources?
Hi Jay! There is 1 USB-C port (for display), 1 HDMI port, and 1 Display port on both of these monitors.
@@HuntsPhotoandVideo I purchased a usb typce-c to display port cable. I connected the type-c end to the usb type c at the bottom of the monitor and the display port to the graphics card (rtx 3090). The monitor could not seem to pick it up. It only picks up when I use a hdi to display port and dispaly port to display port cable
I got the benq pd2705U 4k but it seems dim and not as sharp as my iMac 27” .. is that how it’s supposed to be? When the review says the contrast and clarity is excellent, is this acceptable or is my monitor damaged?
Hi Jacqueline! It's difficult to say, the iMac displays are high quality and with their glossy finish, the contrast can appear higher. It also depends which iMac you have as they do offer a model with a higher resolution than the BenQ! The contrast and clarity of the PD27 is great but it does take some tweaking (in the settings) to get it properly calibrated to your exact setup.
Hope this helps!
From what i understand is that it has low nits. so its best to use in a dark room.
me too😭😭😭
Sorry if it gets to you too late, but there's a way around the dim screen, which is activating the DualView through the Display Pilot 2 app (provided by BenQ). When you do so, the brightness surprisignly reaches a very high level (it's very consistent if you choose sRGB on both sides). I'm not sure why it happens and I'm reaching out to their support to make sense of it...
Does the PD2705U contain Thunderbolt 3 USB-C Port?
I want to connect my Macbook Pro via TB3 to PD2705U and them chain it via DP to a PD2700Q.
Hi Walter, the PD27 does contain a USB-C port which can also deliver up to 65w of power!
@@HuntsPhotoandVideo Thank you! So unfortunately it is not Thunderbolt 3 :-/.
Nevertheless, a great monitor for this price!
@@MountFX Hello Walter, did u finalise ? I also want to use the same dual monitor setup
@@gurukripa266 I have bought the a second PD2705Q (UHD was too small for 27" for me).
This PD2705Q also has a USB-C (charging + display) only. USB-C is different than TB.
So, if you want daisy chain your Mac to PD and then via DP to another PD, you need TB (and I am not sure if the M1 or even M2 support multiple monitors over TB at all).
Now I have one cable to my PD2700Q and one (incl power) to my PD2705Q, from my Mac. Its OK for me now and was not worth the cost of few hundred bucks more.
@@MountFX Great thanks. I want one of them to be PD2725U & the other one to be PD2705Q ... However I am concerned , will Daisy chain work or do both monitors need to have TB ports (missing in the latter)?
Hi, I am considering a purchase of a 4K monitor for my photography and video editing, my motherboard is ASUS M4A88TD-V EVO/USB3, can you recommend a suitable graphics, card to compliment. Thanks.
Hi John! Unfortunately, at this point we only sell monitors so specific computer component compatibility is a little out of our wheelhouse. We suggest contacting your local Micro Center (or local computer store) as they will be able to suggest the exact compatible units to go with your motherboard! Let them know what resolutions and maximum framerates you will be working with.
Is this suitable for Windows 10. A number of reviews say it was developed for Mac?
Hi Paul, Benq has two monitors that are specifically designed for mac (PD3220U and PD2725U). We have used the two monitors in the video with Windows 10-11 and didn't have any issues. That being said, we did not to any major testing, only general use so it might be worth contacting BenQ to get their full advice. Hope this helps!
on the pd27 does it need to be calibrated or is it calibrated out of box? wondering if i buy i need to buy a calibrator as well
These monitors do come factory calibrated but Benq recommends calibrating your monitors once a month for accuracy.
hi man, do you think pd2705U's 250nits brightness is okay or is it low?
Hello! It really depends on the lighting conditions in your workspace. For everyday indoor use, 250 nits is plenty bright. If you are working in a brightly lit area with heavy sunlight, it could pose an issue if not using in HDR mode. It comes down to preference!
Pretty Interesting, how will it compare with the LG 32” inch Ergo Ultrafine?
Hi Benjamin! Unfortunately we have not tested them against each other so we can only give you the minor differences in specs. As far as we can tell they differ in terms of color gammut (BenQ - 99% sRGB & 99% Rec. 709) (LG - 95% DCI-P3 & 95% CIE1976), weight (BenQ - 20.72lb) (LG - 34.1lb), and price! There are likely some more specific working differences but without a true test, it will be difficult to tell as they seem quite similar.
Hope this helps!
@@HuntsPhotoandVideo it helps! Thanks for pointing those differences 🙏
I am searching for best monitor for Graphic design and video editing and came through this video.I just wanted to know does type -c or thunderbolt display or charge device.
Hi Zahid! The power is delivered to the monitor through a power cable (AC) and the USB-C can be used for power delivery to external devices, display or data.
Hi, how can i use 2705 KVM switch with mac mini M1 and mac book pro?
Hi Jayant, unfortunately having not worked with the KVM switcher before, we can only give an educated guess but here is BenQ's KVM switcher page - www.benq.com/en-us/knowledge-center/knowledge/one-set-to-control-two-systems-with-kvm.html
Hope this helps!
Great video 👌Epic Channel 😃 Congratulations. I really need your opinion: I'm interested in buying the BenQ PD2705U monitor, what do you think about this model, would it be a good buy? My fear and doubt is that it has 250 nits. Based on your experience, do you think 250 nits is enough? I'm going to use this monitor for web design, programming, and also for watching movies and shows. My office has a window that is usually open. The window is 4 meters away from the monitor. What is your opinion?
Thank you so much! It's difficult to say because it depends on the situation. For us, the PD2705U is great but we use them in controlled studio settings. They are plenty bright for us and display amazing color. If you are worried about any light spill, you can always get the hood but for the best results, a darker environment is the best option.
@@HuntsPhotoandVideo Thank you very much. Super video. Super person. 👌 Regards 😀
tbh, i never really understood the need for high nits displays. Ive got a max. 250 nits display and i work right next to a window with direct sunlight coming in.... and ive got my 250 nits monitor at 10% brightness haha :D
Hey I can't decide between this 27" Ben and the Asus PA279cv for my Mac. If I connect it with USB C what bandwitch will be left for the other usb ports ? Because it is not thunderbolt are the hub really useful to connect an external SSD or a soundcard for example ?
Hi Najib, it depends on your workflow. You do have access to 2 USB type B upstream ports (some audio interfaces and midi controllers will use this connection) along with the USB-C connection for your computer. It isn't a thunderbolt connection but BenQ has packed quite a few connectivity variations to choose from but it doesn't work for everyone.
@@HuntsPhotoandVideo Thanks for the answer, it's for a 14" M1 Pro so USB C is nice but I've read on the manuel that if I use it in 4k 60Hz the other usb ports will be just USB 2.0. Have I understood it correctly ? My soundcard is a MOTU ultra lite in usb C aswell.
2705U only support 8 bit color not 10 bit
According to BenQ, the PD2705U does indeed support 10-bit color as long as your hardware supports it!
Great Video!! I wonder how does it compares to the LG-32UN880-B? It would mean a lot if you reply me 🙇🏻♂️ . Thanks in advance 🙏
Hi MrYong!
We will only be able to give you some of the basic spec differences as we have not tested out the LG monitor. Some of the differences include color gamut (LG - DCP-P3 95% vs BenQ - sRGB 99%), the LG weighs about 2lbs more with the stand, and the LG has a greater swivel/tilt angle. Without a true test it will be hard to see some of the other working differences. We hope this helps!
*This is for the BenQ PD3205U not the 27 as it has the same screen size.
@@HuntsPhotoandVideo Thank you so much for the reply!! You're so kind, love your videos! 😄
@@malekulapakipaki324 thank you very much brother!
why is the 27 pricier than the 32?
Hello Abdullatif! The 27 is actually the cheaper of the two models.
@@HuntsPhotoandVideo my bad i was comparing the price of pd2725u to the 3205u which is a different model, may i know the difference between the pd2725u and pd2705u , Thank you !.
No worries! The PD2725U is brighter, has 100% REC709, a higher power consumption, slimmer bezels, and more inputs/outputs (2x USB-C and HDMI 2.0). There are likely more differences but we have not gotten to use the PD2725U just yet. Hope this helps!
No KVM discussion?