Repairing AXLE On A BIG Kuhn Round Baler.
HTML-код
- Опубликовано: 18 авг 2023
- This video is about replacing a damaged wheel hub on a Kuhn round baler. The hub shaft is damaged and the wheel bearing is not lasting long. In this one the stub shaft is cut out and replaced.
No sheep in this one - all workshop.
I hope you enjoy the video and if you do, please gives us a like and click the subscribe button and bell for future content.
Let me know if you enjoy the video and feel free to drop me a comment and also if you have any questions or suggestions....
Thanks for watching,
David.
Great job. A good farmer, good engineer, good family man.and good attitude. Well done.
Thank you very much, really appreciate your kind comment 👍
The sheep would be proud of you .Great video keep them coming
Will do!
I wish you were my neighbour, your gifted, really enjoyed that.
Wow, thank you
Great to see a master at work and no complaining
Good man yourself
Thanks 👍
That was quite a job, but you did it with proficiency. Great video. Always good to see your helpers Ada and Enya giving you a hand. 😊👍👍
Thank you Linda 👌
Fantastic engeering Top class work, Ur video s are top quality 👏
Thank you very much!
Just came across your channel by accident. Loved this video. Nothing fancy about doing the job just getting it done 👌💪
Thank you. Can't beat keeping things simple...👌
What a man you are! Multi tasked. So many skills go into this task. But also your experience and knowledge about the task in hand and how to tackle it all. Wow well done👍
Thank you very much. Glad you enjoyed it...👍
After watching that, it was a big job to take on, have to say, your an engineering genius 😊😅
Thank you for your kind comment 👌
Great to see someone to take on a job like that and done with such ease and experience. Love these type of videos
Glad you enjoyed it, thanks...👌
That angle iron alignment tool was a very smart move!
Comment for the algorithm to help the channel 👍.
Thanks for that!
Brilliant piece of engineering sir.Perfect welding and tactics.True talent.
Thank you very much!
Love this channel lad subscribed all the way from Toronto !!😊
Welcome to the channel! Orlaith's brother Cian lives in Toronto. We've been there few years ago. Beautiful country..👌
@@sheepschool365 thanks man im from slane co meath myself but moved here 2 years ago I love the engineering videos class work its brilliant watching keep it up please 😊
You have the cutest mechanics.
Good job well done - not many would take on a job like that.
Must have gotten some clip to bend the stub!
Thank you! Had to be involved in a collision of some description...
Great video David
👍
Excellent job David great video 👌🏻👌🏻great to see the little ladies out giving a hand too keep up the good work 👌🏻
Glad you enjoyed it 👍
What a grate dad having the kids helping ❤❤
Love having them out to help 👌
Hello David great job on the Bella
Thank you!
Enjoyed the video
Great video. Talented man . What I loved the most was how calm you remained when the hub wasn’t a match and you had to alter. If it was me I’d have the hammer pegged across the work shop 😂😂😂😂
Maybe you edited out the choice wards 😂thanks for the info on the welder. Looking to get a MIG welder and Have the same issue with the 3 phase so great advice. Looking forward to the next video
I knew the job was going too well!
Great job! Enjoyed the video very much.
Super job David 👏
Thanks Noel...👌
Great video David some hands on you nice work 👏💪👌
Thanks Gary 👍
Some job better than new that old esb pylon turns up in every workshop vid great stuff to have about the place😂👍👍👍
Thanks 👍. It's great steel. Not half enough of it about 😜
Great video
Thanks!
Awesome job, great video
👍
A master at his trade 👌
Thank you 👍
Some boy 👌
Thanks 👍. Waiting for your next upload!
Your good with your hands 😅
Excellent repair
Thanks 👍
Very cool video.
Glad you enjoyed it👌
Absolutely mighty job you done there. Skills like yours are priceless in the farming community shame you don't live near me up north. Pleasure to watch and nice you got a dry spell to work outside
Thank you 👍
Great video 💪
Glad you liked it!
Great video 😊
Thanks for watching
Good job u do a bit of everything
Thanks. Like a bit of variety...
Great video 👍🏻
Thanks 👍
Great job
👍
Great video, good work👍
Thank you! 👍
Lovely old job
Genius!
Thanks for a Great video, you got the job done and no fuss. Subscribed
Thank you. Good to know you enjoyed it 👌
Well done, very interesting, beautiful children.
You are handy enough, i enjoyed that.
Thank you 👌
Top Work 🛠🛠🏆🏆🍺🍺
Thank you 👍
😮 Super knap werk man
Thank you 👌
Your a talented man with a torch and a welder, not an easy job you done there, would intimidate many good welders and fitters
My downfall is I enjoy a challenge like that and the simple jobs are few and far between ...😉
Some skill and great craft. Your some man, made that look a small job. Phenomenal
Thanks 👍
Nice job mate 👍👍👍
Thank you! 👌
Good work👍
Thanks ✌️
Great bit of engineering work that fair play.
Love watching your videos , can really learn and pick up so many wee tips from them.
It's getting harder all the time to find skilled men who will do these kind of jobs.
Keep the videos coming 👍
Thank you 👍
There are easier ways to make money but I enjoy that type of work...
If you get up every morning and enjoy getting stuck into your work that's half the battle. So many people don't enjoy what they work at, sometimes its not all about money.
Great wrk gud video 👌
Thank you 👌
A1 ..job very well thought out .brake hub difference proved every job usually has a way of goin pear shaped
I've learned the hard way to never assume that a job is going to be straight forward 😄
Serious job. Great hsnds on you
Thanks 👍
Absolutely incredible workmanship 👏🏻. Love these kind of videos hope you record some more of your jobs . There’s a channel on here called snowball engineering he’s a young fella over in England doing similar work with agricultural machinery too. If you haven’t seen him he’s definitely worth a watch. He’s gifted like yourself 👍🏻
Great stuff. Thanks for that...👌
good job helo here from denmark
Velkommen to the channel...👌
Some job! 🫡
Thank you 👍
Wow
🤙
some engineering skills there, new subscriber
Thank you and welcome aboard..👌
Спасибо за информацию
love what you do ,and if you want 3 phase on the cheap a generator that runs off a tractor pto ,lots about and cheap regards
Thanks for that 👌
Reat job lad..tidy bit of work there..
Thank you 👌
Great video, bit of rootin on the street, cleanest bit of concrete ye have hoping not to loose any bits 😂
And no bits leftover....😜
No Fool 👌
Cześć. Podoba mi się praca jaką wykonałeś. Pozdrawiam
Thank you for the visit 👌
Great set of hands on ya. Lovely to meet you at Tullamore show.
Thanks for calling for a chat. Great to meet ya..👍
I like these videos 👍
Glad you liked it!
That welder you mentioned i need to make the same move is your house and shed on the same connection
Yea. On the same connection. It requires a 32amp socket and trip switch.
Thanks for getting back to me, I was about to by a new jasic single phase of my local man but when I looked at the plate on the back it said it needs 52AMP to run so I got on to my electrician and he said that my house would only have 63AMP's so that would mean I would only have 11AMP left while I was welding I have a murex 251 at the min and it only needs 32amp so that's how I'm getting away but she has got very shuttering and I find her very under power at anything over 8 or 10 mil I wonder have the big single phase sappy with is 100AMP because that's what all the milk men have
You put a lot of work into the project and fair play to ya. My mate added another axle to a tipping trailer last week. Made a mega job of it. It sits better and he recons its easier to pull along the road. Do you build many sheds?
Make about 10 or 12 per year. None in the last 12 months due to the massive material prices....
@sheepschool365 I know all about it. I broke sod last July and of it wasn't for using up alot of favors there would just be a hole in the ground. It will be a while before I'm ready but I'll keep ya in mind 👍
Have you bales to make soon David ? No bother getting one baler man at least now..
No bales made yet. Hoping for a good winter 😜
He must be baling on top the ditches when he bent the stub like that . The back of the boot 🥾 only job for getting her in. She flew on. 😅
Ya would imagine the front hub would get all the abuse first. I'd say back hub took a knock from a car at some stage....
Very professional job ,did you train somewhere or self taught ?
Mostly self taught but worked with some great people in my younger days....
USA number one
👍
😎👍😎
How did it get damaged I'd like to know. Great videos. Thanks..
It's like that from he bought it as a fairly new baler. I'd guess a car collided with the wheel from the side at some stage. Only way I could think how the back hub got damaged....
Very well done not your first time, you self taught, or did you learn your trade somewhere? Thanks
Mostly self taught but worked with some great people in my younger days....
Good job mate, what did you think about the replacement back plate being so much thinner, you recon it's up for it or is it a wait and see cos parts are hard to get ?
Thank you. I'm fairly confident the replacement hub will outlast the balers lifespan. 60,000 bales gone through it already!
Great Job 👍 well done💪 how long need you to fix it? Greetings from 🇦🇹 Austria.
Thank you 👌. Took about a day and a half...
The tyre will wear badly when run in the wrong direction. Makes a huge difference, they scrub off in no time even if the bearings are good!
Jobs fucked when the stub bends😂 great video chap👌
Thanks for that 👌
A other good one
Thanks 👍
Brilliant video David. You have great patience to take on that job. I never heard of your channel till recently even though am not too far from you. In fact I think your number is on my phone, are you or were you a member of Ballinagh Vintage Club?
Thank you Alan..👌
Patience is is something you learn fast when you start sheep farming 😁
@@sheepschool365 that’s true lad. Does your number start with 750?
Axle Road-less 😄 😁
How the hell did he bend the stub
It's like that from he bought it as a fairly new baler. I'd guess a car collided with the wheel from the side at some stage. Only way I could think how the back hub got damaged....
Hit a hole big enough while going fast enough and that's it😂
@@sheepschool365l wud hate to see the car
Hit a fence post I'd say
Excellent piece of work.All action and not talkin profuse amounts of shite like the Americans..
BTW perhaps the axl shudda been tacked either side prior to being fully welded to avoid weld distortion despite the fact that it was firmly aligned with the angle irons.
Thank you. Had it well tacked front and back, edited out that bit to speed up video... Have learned the hard way over the years...👌
Oh good stuff..I'm not fond of those bogey axles.anyway..Thanks for reply
Ur a super worker David credit to ya how are the lambs going for ya for sale
Thank you..👌 Lambs are doing well. Should have sold more earlier...
Kuhn balers are made of cheese,it wouldn't be difficult to bend any part of one.
Cavans welderfabber .
"PromoSM" 💪
Mate, i think you forgot to read John Deers statements on right to repair... farmers don't want to be able to repair their machinery and gear... or so they said...
Also several farmers associations representatives somehow follow the manufacturers statements instead of those of their members...
how dare you be a farmer repairing their gear... you are not supposed to exist
(cynical joking of course...)
개나소나,,다유튜브네
👍
What is this to do with sheep, your going to wreck your channel with this content if ya dont have sheep content just wait til ya have
It's unfortunate you can't recognise or praise talent when you see it...Life isn't all about sheep. Diversity in videos is what people want to see...
@@orlaithmcdermott1162 maybe vlogs need to be renamed engineering school!!
@@user-gc3xr5bq5c why because there is two engineering videos on the channel?
Hi Gregory, just trying something a little different. Thought of starting a different channel for the engineering videos but I don't think it really matters. People will only watch a video if they want to.
Thanks for the visit, David.
The only thing that was wrecked was that stub axle 😂farmers have to repair too and nice to see a farmer with a workshop, the gear and the know how. Well done.
Love to see the setup you have to convert single phase to 3 phase!
Great video
Thank you 👌