Dana 300 Rebuild 1 of 4 | Project Rowdy Ep032
HTML-код
- Опубликовано: 25 авг 2024
- This is Part 1 of my Dana 300 Transfer Case rebuild. This Dana 300 will be installed in my 1979 Jeep CJ7 during my LS Swap conversion. I will be using the Crown D300-MASKIT Master Rebuild Kit which includes all of the Bearings, Races, Seals, Gaskets, Needle Bearing, Intermediate Shaft, and Shift Fork Pads for this rebuild.
Project Rowdy is a restoration on a 1979 Jeep CJ7.
Parts and Items Used in this Episode:
Crown D300-MASKIT: amzn.to/2FjOjQ1
ChannelLock Snap Ring Pliers: amzn.to/2ZDxW9Z
Auto Bearing Race Seal Driver: amzn.to/36dh78z
Cresent 3/8" Deep Socket: amzn.to/37rS1mD
Permatex Blue ThreadLocker: amzn.to/39B9KK5
Permatex Gasket Maker: amzn.to/35kpZbe
Timken 25877 Bearing: amzn.to/2Ol43a8
Dana 300 Service Guide: bit.ly/36RyRph
Project Rowdy Playlist: www.youtube.co....
UCanDoIt2 Website: www.ucandoit2.c...
UCanDoIt2 Contact: UCanDoIt2Mike@gmail.com
JeepForum Thread:
www.jeepforum.c....
Facebook Page:
/ projectrowdy
Music
Intro: Alex Skrindo (Alive)
#Dana300 #jeep #jeepcj #lsswap #lsswaptheworld #lsswapc10 #lsswapc10 #diyperformance #ProjectRowdy
Well done, thank you sir...despite what you may see on the road there are still a bunch of us CJ guys around.
Thank you Sir. As CJ owners, it’s our responsibility to keep them running and on the road. Still trying to get mine assembled and looking forward to cruising around in it like the old days. I’ve owned this Jeep for 34 years. Thanks…. Mike
Your videos are well shot and well organized.
I appreciate the feedback Kevin... Thank for watching. Cheers Mike
I'm very "detailed" orientated so I appreciated seeing you download the PDF file and made notes. You provided a very detailed and well organized tear down video, thanks.
Thank you Wyatt! Just updated my version of the PDF and plan to upload so that others can benefit. Cheers to you and Happy New Year!
This will be an awesome reference series. Nice work.
Thank you Stan... Cheers and Happy New Year!
We missed your videos so much
This makes me happy! Cheers and Happy New Years!!!!
Where you been? I’m really happy to see your videos again, you make the most explained videos ever! Hope to see videos of the LS swap finished!
Work... Life... It is amazing the little things that can distract you!!! Especially on long projects. Thanks for hanging in there and following along... Mike
I HAVE BEEN WAITING SOOOO LONG FOR MORE VIDEOS!!!!
I appreciate you following along. Two weeks ago, I published an update of replacing the Front Driver's Side floor pan. Anyway... Cheers to you and Happy New Year.... Mike
Good to see your videos again. Very informative for sure.
Thank you Chris... Cheers Mike!
Great Job Young Man!!!!!!!!
I appreciate the feedback! Thanks.... Mike
Another great video! Thank you for taking us along your project journey. Can’t tell you how much I appreciate the investment you’ve made in this project. I’ll be happily awaiting your next upload.
This makes me smile! Thank you very much for the compliment! Cheers Mike!
As always, quality work. Thanks amigo 👍🏼
Thank you Sir! Cheers to you in the New Year! Mike
I had a '84 CJ7 I bought new. The Dana 300 was the ONLY piece of the jeep I never had to work on. BULLETPROOF
Sweet! That's good to know. Mike
Finally!! Happy 2020
Cheers and Happy 2020 to you as well... Mike!
Hey Mike - great to see another video from ya! Happy New Year!
I just finished rebuilding a short tail Dana 300 for my swap as well and used that kit. The only problem I encountered was an incorrect bearing as there are minor differences between the long tail and short tail output shaft. You may need to order another bearing, as I did. (The correct bearing was Timken 25877 and I believe the race was correct, but I ordered a new one anyways - Timken 25821).
Best of luck! Also, let me know what bits and pieces of the shifter assembly you need - I may already have them and can run them over to ya.
Thank you for the heads up on the possible bearing differences on Long/Short tail. I will make sure to always check the original versus the replacement. In the final video of this rebuild, I will highlight what I have for the shifter assembly. I believe it is just some washers and a nut that I am missing, but I need to look into it more. Cheers and Happy New Year!!!!!! Mike
You do absolutely Excellent Videos - so glad I found your channel! have a very low mileage (40K) Dana 300 that leaks. Do you think I can just replace all the seals without a complete teardown? Thanks
Without seeing it, I would say that it depends on where the leak is located.
The best case it is the lower pan and that would just be removing it and adding new gasket and sealant. If it is the Idler Shaft (o-ring)….. that’s the worst case as I can’t think of anything other than a complete tear down as the loose bearing will fall out. If it is on either of the shafts, I believe that is also an easy remove/seal/replace.
Glad you found the channel. Hope this helps. Mike
Most of the leaking seems to be the front output rear bearing cap and the shift levers. I'll rewatch your series to see if I can do it. Thank you!
Hey Mike, excellent work as always!!!! Does anyone offer a GM 40-tooth speed gear for the output shaft? That would make your 5.3 PCM install very easy. Keep up all the hard work and the videos you post will be a resource for many people in the future.
Thank you Bob! Not sure on the Speed Gear. Hoping these videos will provide some insight to others that would like to do this as well. Cheers! Mike
Was that the speedometer gear you pulled out ? I thought the speedometer gear was in the transmission not the T-case
Yes that was the speedo gear. It is located in the TCase due to the possible gearing changes that it can introduce.
@@UCanDoIt2Mike did you regear or put the same one back in?
@@bobbygeorge2183 I reused the original Speedo gear. I believe replacements for the short tail housing units are hard to come by. They are a little different.