If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
I've had experience with Tamya spray paint, the only model I've ever built was a dalek model kit, I got it pre built but badly done and very damaged, so I dismantled him and put him back together and replaced some pieces, that was a gluey model rather than a screwy model, but I painted him up with tamya paint, it was the aerosol cans of spray paint, the main one was an aluminium, TS17, I think? Might be the same stuff you painted that floor with
I’m doing and loving the build myself but I feel for the money some of the issues could have a few more parts to build. They’ve been lacking in some issues.
I did some checking - the pictures I tweeted you are Ecto 2 from Ghostbusters 2. Not Ecto 1. However, other than the radio change the instruments are the same. Then at some point after Ecto 2 was updated again to include a extending jump seat seen in the upcoming GB Afterlife
Hi wayne I was putting the wing flaps on my spitfire the left underwing flap is white and fits the left underwing which is black and the right underwing flap which is black and the right under wing white
Hi Wayne just a thought have you ever thought of making a video of the models your doing like say the bismark or the super snake after you have finnished them stage by stage and putting them on your Amazon store as not everyone can afford a lot at once and may buy one of them later cheers
These models are like a moment in time for me. I have a sentimental attachment to them. Unless I have built a duplicate I probably won't sell. Never say never though. I did sell the Thunderbird 2
Morning Wayne. So that seat backrest is that wobbly? I ordered the hood vents from Mike and I'm going to order the floor mats , did you get the floor mats from Make? And does anybody make the correct license plate for the Ecto 1 Wayne? I got the information with your full name and address and I'll be sending that out next week sometime with those two extra parts and maybe you can find a good home for them. Wayne do you get snow where you're at by any chance? I hope one of those new bills will be the Iron Man figure. And the Harry Potter train. When I will give you a heads up when they actually mail the package to you and I will be putting the money order inside the package. Well you and your wife be safe over there and all your family. Bruce
I have seen both version's now. To ask did you have to undo the seat to tighten the backrest did not see that bit one the strem? Thank you Loving the build as all ways. Stay safe all.
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
The flooring used is normally aluminium chequerplate Wayne. This gives a non-slip surface that can be washed down and free from corrosion.
I can't wait to see the car done
I've had experience with Tamya spray paint, the only model I've ever built was a dalek model kit, I got it pre built but badly done and very damaged, so I dismantled him and put him back together and replaced some pieces, that was a gluey model rather than a screwy model, but I painted him up with tamya paint, it was the aerosol cans of spray paint, the main one was an aluminium, TS17, I think? Might be the same stuff you painted that floor with
I’m doing and loving the build myself but I feel for the money some of the issues could have a few more parts to build. They’ve been lacking in some issues.
There's something very familiar about all this. Deja vu all over again!
I did some checking - the pictures I tweeted you are Ecto 2 from Ghostbusters 2. Not Ecto 1. However, other than the radio change the instruments are the same.
Then at some point after Ecto 2 was updated again to include a extending jump seat seen in the upcoming GB Afterlife
Hi wayne I was putting the wing flaps on my spitfire the left underwing flap is white and fits the left underwing which is black and the right underwing flap which is black and the right under wing white
Yep thats correct
Whether it's screen accurate or not I think the aluminium steel floor looks nicer to be honest.
Hi Wayne just a thought have you ever thought of making a video of the models your doing like say the bismark or the super snake after you have finnished them stage by stage and putting them on your Amazon store as not everyone can afford a lot at once and may buy one of them later cheers
These models are like a moment in time for me. I have a sentimental attachment to them. Unless I have built a duplicate I probably won't sell. Never say never though. I did sell the Thunderbird 2
Morning Wayne. So that seat backrest is that wobbly? I ordered the hood vents from Mike and I'm going to order the floor mats , did you get the floor mats from Make? And does anybody make the correct license plate for the Ecto 1 Wayne? I got the information with your full name and address and I'll be sending that out next week sometime with those two extra parts and maybe you can find a good home for them. Wayne do you get snow where you're at by any chance? I hope one of those new bills will be the Iron Man figure. And the Harry Potter train. When I will give you a heads up when they actually mail the package to you and I will be putting the money order inside the package. Well you and your wife be safe over there and all your family. Bruce
I managed to tighten the seat in the last few minutes of the live video. Doesn't Mike do the number plate too?
I don't know but I will check and ask him thanks
hi did you use a primer painting the base of the ghostbusters build id you get the number of the paint did you use a airbrush to paint it
Yep used valleys ghost grey primer and Tamiya x-16 lacquer
I have seen both version's now.
To ask did you have to undo the seat to tighten the backrest did not see that bit one the strem?
Thank you
Loving the build as all ways.
Stay safe all.
Yep. While you were watching the model designs video I fixed it then
@@WorldofWayneUK Thank you.
Hey Wayne where did you get the slimer and stay puft marshmallow man
They were sent to me from one of my viewers
where is that slimmer from, did it come as a gift from the issue?
No. Just a little toy that was sent to me from Graham Loki
Hi wayne any recommendations for an office chair need one for comfort thanks
Check out my Amazon store at www.bit.ly/worldofwayne. I have some in my RUclips studio tab.
@@WorldofWayneUK Thank you
Woo
The discord link doesn't work for me. It needs to be an invite, not a link to a channel.
I will try and get on with changing it.
Like video