Merci beaucoup pour cette vidéo. Mais je dois dire que certains systèmes détectent quand vous faites une copie de l'original et bloquent toute votre carte magique + votre étiquette d'origine. Tout dépend de la technologie utilisée par le fabricant + des données de cryptage. Before using that, i manage to install my ProxMark3 on a virtual machine + Github soft from Iceman
I keep getting a error code named langtrans::str(HID_ERR_2) And because i don’t understand chinese i don’t know why it acts like that. Some one who may know the reason?
Can it remove expire date from access card as well I have a card for which everyonth I need to renew at security office. Can it copy without expire date? Plz guide
crypted rfid used by instance in some transportation companies use Calypso encrypted software. Calypso encrypted data r very safe & not cracked. The best way is to read tutorial on the Proxmark3 device + Github open source software. Its quite hard for people not at ease with computers & programing, but recheable.
@@dalanik Thanks bro, but my laptop count' find the NFC reader when i plugged to USD, but it was detected, any idea if we can fix this issue? thanks again.
I have no issues getting the software but my computer doesn’t seem to want to recognise the reader within the actual software.
Merci beaucoup pour cette vidéo. Mais je dois dire que certains systèmes détectent quand vous faites une copie de l'original et bloquent toute votre carte magique + votre étiquette d'origine. Tout dépend de la technologie utilisée par le fabricant + des données de cryptage.
Before using that, i manage to install my ProxMark3 on a virtual machine + Github soft from Iceman
aluien mas se le cierra el programa al leer la tarjeta saludos
Hi dear how did you set up the system you used learners or many other systems how did you set up the system did you use arduino or ?
I keep getting a error code named langtrans::str(HID_ERR_2)
And because i don’t understand chinese i don’t know why it acts like that. Some one who may know the reason?
can you tell me the reading distance of this reader....mostly the 13.56MHz can reach 1 meter ...is it like that
No, you have to put the card on the reader. Maybee max 2-3mm
What kind of reader do you use to open the door
How to get it to detect its own fobs? Mine reads the blank cards but not the fobs it came with or any of my rfid/prox cards or fobs
Fobs and cards are different mhz/khz frequency, that is probably why they don't work. Make sure when copying to use same model of chip on card
Can it remove expire date from access card as well I have a card for which everyonth I need to renew at security office. Can it copy without expire date? Plz guide
Not possible, as it is most likely that the expire date is managed by the security office, not a setting on the card.
@@emunightcore not it's done on the card itself I have saw them update the card with small NFC reader and input start and end date
@@emunightcore as these locks are not centralized so it's done for sure at card level only
@@fawadmalik4765 you could try scan it and see what comes up, if there is an option for expiry date then you can just extend it yourself.
Does it also support ISO 15693 cards?
I need the program =/
Did you copy 125khz or 13,56Mhz ... which card or keyfob did your building use
My building uses 125Khz keyfobs, but since they shipped 125Khz cards, I copied keyfob onto the card.
does my computer need to be connected to WiFi in order for this to work? also great video!
No, once you downloaded the software, you don't need to be connected. Thanx!
i see it fails to write the card. on your third attempt it worked. with me however it does not work. any idea what the issue might be?
Seems you have to place it at a particular spot, I am not sure... I only made like 4-5 copies. Does it beep?
@@dalanik it does.
I just found out that it works for me with the 2021 version too. The 2022 seems to be buggy. Thnx!
Have u tried with encrypted rfid tags ??
Yes i tried one, there is option to decrypt but it didnt work... but im no expert on rfid tags...
@@dalanik noted ... thanks
crypted rfid used by instance in some transportation companies use Calypso encrypted software. Calypso encrypted data r very safe & not cracked.
The best way is to read tutorial on the Proxmark3 device + Github open source software. Its quite hard for people not at ease with computers & programing, but recheable.
Windows SmartScreen blocks the software from running...
Avast and kaspersky also.
Can it scan from long distnace?
No
Would this work with my debit card?
No, they are heavily encrypted
Can clone encrypted 13.56 MHz ?
It is hit and miss with encrypted cards. Sometimes it can decode, sometimes it can't.... :(
Dónde puedo descargar el software?
The device appears on pc as a disk drive and there's a link to download there.
Is it safe?
Why shouldn't it be?
Hi, where to download the software
www.nsccn.com/download/soft/nfc/nfcPro_wbw.exe
@@dalanik Thanks bro, but my laptop count' find the NFC reader when i plugged to USD, but it was detected, any idea if we can fix this issue? thanks again.
@@vincentpss This copier doesn't need drivers or even software installation - just download the software and run the downloaded .exe....
I see, thanks bro
@@vincentpss I don't see it the exe
Some software recommended?
There is software you get with the copier. I didn't try any other software.