Mate. Seriously. I have watched almost every other commutator/countour tutorial out there (including jperms). You are the only one I have understood. Frickin legend u are. Thank you
You’re the best! How many videos I’ve watched for understanding this but I couldn’t. Finally I’ve really understood the point of the solution. Thank you so much!
showing us how to properly do it is more important that colling it the right name. we all know what it's called we wanted to know how to do it. and you did a great job!
If you locate the pieces to just one side (I like the left) then you only need to remember one sequence not two. Incidentally, here is a little trick to reduce the 7 move alg for edge flipping: R U R' F R' F' R down to 4. R F' Z R Or down to 3 moves. For a 4×4: R 3Bw' R For a 5×5: R 4Bw' R etc.
It looks like all big cubes odd or even layers apply the same algorithm to solve those annoying commutators. I been struggling with the last 2 center faces because of not understanding how the commutator actually works. I'm now going to be solving my 7x7 a bit more frequently. So far the best I have done was just a little over an hour
You really shouldn't do opposite sides. It makes the swapping harder. I suggest finishing the opposite side so you have adjacent centers you can swap with
When changing the direction/determining which F move to use, you want to do it opposite to the side your slice down. If you slice down on the right you use F' if you do left you do F.
The Cubing Bear Oh yeah, nice. I got it figured out. Lol now I’m so stuck on the last two edges of my 8x8. I wish there was a slower phased tutorial video on solving the last two edges.
Too much rambling not enough showing, Need to see your hands performed the algorithm multiple times rather than pausing in the middle of the example multiple times Like at 6:00 You’ve already explained this point in excruciating detail before, But it’s still not clear about the middle of the algorithm on the 5 x 5
The Cubing Bear dont mind me I commented this just for myself cuz i dont quiet understand just now and i can access to there quicker.But now I realize its very easy. Nice tutorial!
You might not have said the word properly, but you sure explain it a LOT better than most videos I've watched on the subject.
JPerm explains good too but he has not done this on the big cubes only on 3x3x3.
Mate. Seriously. I have watched almost every other commutator/countour tutorial out there (including jperms). You are the only one I have understood. Frickin legend u are. Thank you
2:50 is where he first does the full alg.
thank you
He literally never works through the whole thing, its dumb AF
@@lisleborger6900 fr allotta useless yap
Thank you so much, I was solving last two center since 11x11 and this was the easiest and best video on it , thanks for teaching me contours hahaha
this video is the definition of 'my parents are sleeping i cant talk too loud'
If I just make one noise then they yell at me
Hope things going ok now buddy
This is amazing. It is working very well on the centers of my 9x9. Thank you so much!
Thank you so much for this! I've been looking for so long for an explanation for how to do center commutators!!
Dude, thanks a lot!!! Your explanation is the best!!! I was stuck for 1 hour, but then I watched your video! Now I can do it. Thanks again, dude!!!
No probelm man! Im so happy that this was able to help you :)
your right
Thanks so much i was finally able to solve the last 2 centers of my 11x11. Great explanation.
Your welcome my man:).
I got so annyoyed because you freaking moved the cube sooo much I messed up and have to redo my centers on my 7x7
Damn my guy that sucks sorry about that. Ill try not to do that next video
You’re the best! How many videos I’ve watched for understanding this but I couldn’t. Finally I’ve really understood the point of the solution. Thank you so much!
Glad it was helpful.
Thanks for the tutorial, fun and simple explanation for solving the centers of my 7x7
This is the best video out there for commutators, it’s clear and now I know what to do thank you
Thanks for the help man I was literally stuck on this step.Ur video is way more better than other ones out there
Thank you for the best explanation I have come across so far.
Brilliant techniques clearly explained.👍
bro you got a new subscriber love this tutorial
Thank you! Your explanation was clearer than other tutors! Well done!
Thanks bro, you made my day... I was like, why i am not getting it. Now i have the answer the because the videos wasn't explaining well...
NP glad it helps
Thnx maan.... I saw a lot of tutorials but was not able to understand... This one is lit.... Thnx a lot
Your welcome man :). I'm so happy it helped you out :)
Thankyou sooo much! I finally solved my 10 by 10 rubiks cube thanks to this tutorial. :)
showing us how to properly do it is more important that colling it the right name. we all know what it's called we wanted to know how to do it. and you did a great job!
Thank you thank you thank you thank you thank you I can finally continue my 9x9 after 1 day of trying to do it
Your welcome man :) so happy that this helped hope your 9co solve goes on smoothly
THANK YOU SO MUCH THIS TUTORIAL IS THE BEST ONE IVE SEEN AND IT ACTUALLY WORKED
Dude I had three center corner peices and this helped so much thank you
I ended up using this on a 6x6 Mastermorphinx because I could not for the LIFE of me get my brain to use normal algs on it! Thanks a ton
Best tutorial. hands down.
Thanks so much helped me with my 10 x 10
this amazing you are so underrated mate
Fantastic tutorial. Wonderful explanation.
thx i appritiate it
Thank you so much, because i was stuck on a 7x7 case. :)
Very well explained. Great job!
Thank you man:)
If you locate the pieces to just one side (I like the left) then you only need to remember one sequence not two.
Incidentally, here is a little trick to reduce the 7 move alg for edge flipping: R U R' F R' F' R
down to 4.
R F' Z R
Or down to 3 moves.
For a 4×4: R 3Bw' R
For a 5×5: R 4Bw' R
etc.
Thanks for this :) I was stuck on l2c on my 6x6 and this helped me a lot.
I love you thank I finally solve my 10 by 10
Thx you really helped me with my 6x6
Thank you so much!! You explained this quick and easily and helped me on my 7x7!
your welcome im so glad that it was able to help out
Contours draws me nuts but this video works well 😂
draws lmao
BROOO I THOUGHT THIS GONNA BE HARD LIKE 3X3 COMMUTATORS BUT NAHHHHH TYSM
Thank you so much this was so helpful!
Your explanation is good, but I still cannot catch it.
Im sorry if ineasnt able to help. Tell me whats wrong i might be able to help.
Now I will be able to solve ANY cube now 10/10
ty btw i am about to solve my first 9x9 bc of you :D
Thank you!!
It looks like all big cubes odd or even layers apply the same algorithm to solve those annoying commutators. I been struggling with the last 2 center faces because of not understanding how the commutator actually works. I'm now going to be solving my 7x7 a bit more frequently. So far the best I have done was just a little over an hour
Yeah that's the right the same basic method is the same but it will just take more time since there more pieces to cover.
Thanks for the help I am liked and subscribed
I was able to apply this to an 8x8! Thanks!
No problem my guy:).I'm glad that it works!
Please make a video to show how to swap pieces on opposite sides in a 7×7 please 😌
A very humble request
You really shouldn't do opposite sides. It makes the swapping harder. I suggest finishing the opposite side so you have adjacent centers you can swap with
@@GrizzMedia I'm still stuck on my 5x5 trying to swap two pieces on opposite sides and your explanation in this reply isn't the easiest to understand
Thanks good video lot better than others our there.
Omg tysm frend :)))😊😊
Thanks bro
Great video, I learn a lot from it
Thanks Dear ❤️
Nice explanation
Thx for the usefull tips!! You have a new sub :) 👍👍👍
Dude thank you soo much!!!
Can you just right it down?
I think it got patched
This was super helpful though thanks :)
Can you do one on the 10x10?
0:50 it's actually not a swap but a cycle. It's a 3-cycle but you can't really see it because centers only have one color
Oh sweet thanks for that piece of clarification man :)
@@GrizzMedia no problem! 👌
Thanks for helping me solve my 17x17
Ying Zhou flexer lmao
必陰陽AlexVT no I actually did
What do I do if the piece that I want to move is in the middle?
Then you can go either way left or right
does the f direction matter if you are swapping 2 pieces in the middle layer?
No it doesn't
This is awesome, do you mind to do something similar for the commutator of the side pieces, please...
Corner to please
THANK YOU SO MUCH
Really helpful
Thanks
Thx
This was way too useful lol!
What 5x5 do you use?
Shengshou 5x5 from 2015
Thanks bro,, that's really helpful
No problem man. Im happy it was able to help:)
There is a commutator case where i have to switch 2 center corners on the 7x7, can you help
I LOVE UU
Thanks for clearing that up :)
Np
Could you use this to make custom patterns?
Yes
You explained this horribly i found a better tutorial
Can you please share that?
How are you supposed to even know what direction to do the f/u move
When i put communtayor the ato correct put
Commnunism
lol
I’m mad 😡 because I almost scrambled my 11x11
2:50
what's the algorithm
You only show how to move around edges not corners my 4x4 is all done except 2 center pieces i have to redo the cube because of this
You dont want to use commutators on a 4x4. It's better to solve them intuitively
you should have done it without saying too much about what happen if this if that. too much water, a beginner gets lost in these explanations
i still dont understand
I cant do it. I even watched your video on how to solve a 10x10, and I still dont understand it
Never mind I got it now
Hey Cubing Bear, I'm trying to follow along , can you actually give the directions of rotation? Saying move it that way is mind messing me up!
When changing the direction/determining which F move to use, you want to do it opposite to the side your slice down. If you slice down on the right you use F' if you do left you do F.
The Cubing Bear
Oh yeah, nice. I got it figured out. Lol now I’m so stuck on the last two edges of my 8x8. I wish there was a slower phased tutorial video on solving the last two edges.
Ah I see sounds good. I may be able to help on the second part I'll do a video on that soon.
The Cubing Bear
That would be so awesome! Please do. I need all the help I can get.
Subscribe to Grizz media,this video is awesome!
This does not make sense
you went too fucking fast on the 5x5
Too much rambling not enough showing, Need to see your hands performed the algorithm multiple times rather than pausing in the middle of the example multiple times
Like at 6:00 You’ve already explained this point in excruciating detail before, But it’s still not clear about the middle of the algorithm on the 5 x 5
countors LOL
How to swap two pieces on opposite sides using commutators?
next time dont go so fast pls
❤L❤
It doesn’t work
Hmm what seems to not be working?
Quit talking and do the full algorithm in one go. Nobody needs to here your explanation for each turn you do it just messes me up.
Stop talking so damn much
This is not helpful
2:50
4:03
2:56
Interesting
The Cubing Bear dont mind me I commented this just for myself cuz i dont quiet understand just now and i can access to there quicker.But now I realize its very easy. Nice tutorial!
The Cubing Bear btw i am solving a 9x9.