Hola antes que nada muchas gracias por compartir conocimiento. Si conecto un capacitor de 2200 mf 25 v, es lo mismo? estimo que al superar los valores podria funcionar. gracias
Pregunta: lo hice con capacitor 470 microfaradios a 25v y transistor bc548 que me dijeron era el mismo y quedan fijas,por cierto lo con más led 10 de cada lado rojo y verde me pueden ayudar por favor
Sir I tried to do this for my project but it's not working the lights of the LED are steady.. but I just used 2 LED only.. Is that the possible problem that's why it's not working?
Dude, if the leds are not lit at all, there is an error somewhere. If the leds are on steady, you need to check the legs of the transistor. You should pay attention to the connection type in the video. The emitter must be soldered to the collector. 👍
Thank yo so much for uploading this awesome video, Love your cartoon character on the end of video,,,😍,,,can you please post a video on how to make a bigger strobe setup for breakdown truck with a 12 Volt system ? Thanks and Bless 🙂👍
Hello my friend. Unfortunately, this circuit does not work with 220v. You need to reduce 220 volts to 5 volts. You can do this with a charger. Thank you for watching 🎉🫡
Lo hice con tip.31 y salió BRIYYYYYYYYYYANTE!!! gracias
Mantap brow sy kagum
Hola antes que nada muchas gracias por compartir conocimiento. Si conecto un capacitor de 2200 mf 25 v, es lo mismo? estimo que al superar los valores podria funcionar. gracias
Estava precisando de um desses, Valeu !!!
Obrigado pelo seu valioso comentario🎉🫡
Если я буду использовать конденсаторы меньшей ëмкасти, будет ли мигать быстрее?
Is this doable with BC550 instead?
Armé el circuito tal y como se describe a lo largo de todo el video, y salió perfecto 👌 💯 Gracias por compartir. Saludos desde México 🤠🇲🇽
Hola. Gracias por tu lindo comentario amigo 🎉 🔥
Puedo usar el transistor bc548 para el circuito
Hello my friend. Yes, you can use BC548 for this circuit🫡
@@Mr.Inventorr thanks
Will this work using 2222s I'm going to try
You can try mate. I'll be waiting for your return 🎉
should work 2N2222 has less gain but can handle higher current
@@kennmossman8701 Thank you for sharing your valuable opinions, my friend.🫡🎉
speed control how setting
Pregunta: lo hice con capacitor 470 microfaradios a 25v y transistor bc548 que me dijeron era el mismo y quedan fijas,por cierto lo con más led 10 de cada lado rojo y verde me pueden ayudar por favor
Se puede conectar a 12 v sin afectar componentes ?
need to use higher value resistors/ easy to burn out transistors and LEDs
and cap WVDC should be at least 16V
Very good
Thanx you My friend🎉
Sir I tried to do this for my project but it's not working the lights of the LED are steady.. but I just used 2 LED only.. Is that the possible problem that's why it's not working?
Dude, if the leds are not lit at all, there is an error somewhere. If the leds are on steady, you need to check the legs of the transistor. You should pay attention to the connection type in the video. The emitter must be soldered to the collector. 👍
@@Mr.Inventorr it's working sir thank you 👍👍👍
@@bobbyngalides5591 🎉You're welcome
How it worked? I have same problem as you
Can it work with a 9 volt battery?
need to use higher value resistors/ easy to burn out transistors and LEDs
and cap WVDC should be at least 12V
@@kennmossman8701 20K is enough?
Thank yo so much for uploading this awesome video, Love your cartoon character on the end of video,,,😍,,,can you please post a video on how to make a bigger strobe setup for breakdown truck with a 12 Volt system ? Thanks and Bless 🙂👍
Would it work on 12 volt motorbike battery with the 60 watt total load?
NO
Pak kalo led nya masing2 di kasih 15 biji bisa gk
येAA 1.5 V से चलेंगे क्या?
Sir, this circuit can work with at least +3V. To be better, it should be operated with at least +5V. Thanks for watching.
💯💯💯💯💯💯👍
Niyamayi
Not working, did exactly the same on my breadboard
Hello friend. You must have made a wrong connection somewhere. This circuit is actively working. I suggest you check the circuit you made again🫡
@Mr.Inventorr I followed the same steps 1 by one but Notting worked. The light are stable and on and are not blinking
It works now. In your video is a mistake, that's why it wasn't working the first time! Luckily I have found the problem
सर इसको 220v से कैसे बनाए।
प्लीज बताएं सर
Hello my friend. Unfortunately, this circuit does not work with 220v. You need to reduce 220 volts to 5 volts. You can do this with a charger. Thank you for watching 🎉🫡
ВЫЛАЖИВАЕТЙ СХЕМУ НИЖЕ ВИДЕО ПОЖАЛУЙСТА
Benim kanalımda yaptığımdan biraz farklı.
Faltou o diagrama