Hi. thought I’d throw in my repair. 495 PC pro. received some light rain in back of truck. dried it inside and attempted to run. clicked for a sec then nothing. LED was giving the 3 blinks. i replaced transducer. Still no stroke. nothing. except led changes to giving continuous fast blinks. no interval. i think all connections are good and it wasn’t wet or appear fluid got in control board area. pump is less than 5 gallons on it. Thanks in advance.
@@jasbpainting more than likely if the packing are new and installed correctly, then you have something in the pump that is clocking the balls. Check out my videos on how to fix that
Hi Brian, have you got a video on fixing dead sprayers?...my titan 640 died last week, it was linked up to my generator, i know we're not supposed to use gennis but had no choice, no power on site, but I've used this genni loads of times before and works fine, just this time my titan died and not came back on, I since tried it on a house plug and still not came back on, any ideas what needs fixing?
@@fletcher-nf4pn the machines prefer inverter style generators. The power is cleaner. Pull the cover off the machine. There should be a black cover on the back of the motor if you have an impact series. 2 screws hold it on. Take it off. Plug the machine in and turn it on see if there are lights. No lights bad board. Flashing lights other problems. Let me know what you have.
@Brian_the_repair_guy yea that's what I've got, an inverter generator and it's the 640 impact...I've not got around to looking yet but is it fixable if lights are still flashing or just best to send it off to my repair man
Hi Brian. As my comment the other day on my AR 1500 psi pressure washer where is a good place to buy that you recommend to buy the 6 valves I need. Thanks.
Hi. thought I’d throw in my repair. 495 PC pro. received some light rain in back of truck. dried it inside and attempted to run. clicked for a sec then nothing. LED was giving the 3 blinks. i replaced transducer. Still no stroke. nothing. except led changes to giving continuous fast blinks. no interval. i think all connections are good and it wasn’t wet or appear fluid got in control board area. pump is less than 5 gallons on it. Thanks in advance.
*pump was replaced on 4 year old unit
@@nathanbareman9453 so now you have just rapid blinks, no pause?
i HAVE LOW PRESSURE My 490 continuisly runs. Does that have anything to do with the transducer? my Packings are new.
@@jasbpainting more than likely if the packing are new and installed correctly, then you have something in the pump that is clocking the balls. Check out my videos on how to fix that
Hi Brian, have you got a video on fixing dead sprayers?...my titan 640 died last week, it was linked up to my generator, i know we're not supposed to use gennis but had no choice, no power on site, but I've used this genni loads of times before and works fine, just this time my titan died and not came back on, I since tried it on a house plug and still not came back on, any ideas what needs fixing?
@@fletcher-nf4pn the machines prefer inverter style generators. The power is cleaner.
Pull the cover off the machine. There should be a black cover on the back of the motor if you have an impact series. 2 screws hold it on. Take it off. Plug the machine in and turn it on see if there are lights. No lights bad board. Flashing lights other problems. Let me know what you have.
@Brian_the_repair_guy yea that's what I've got, an inverter generator and it's the 640 impact...I've not got around to looking yet but is it fixable if lights are still flashing or just best to send it off to my repair man
@@fletcher-nf4pn it's always fixable. Depends on what your abilities are. Let's see what you have
Hi Brian. As my comment the other day on my AR 1500 psi pressure washer where is a good place to buy that you recommend to buy the 6 valves I need. Thanks.
Watercannon.com should be able to help you. You can call them and they will walk you through to get the right parts
Hi Brian my 490 presents code 02,not sure if it’s the contro pressure,any suggestions
@@maximilion5136 the error code E 02 means the transducer is sending a high pressure signal. Usually means transducer is bad.
great video Thx from Canada
I hope it helps
👍