Probably going to be drowned by all the other comments, but for all my metric friends out there, I've converted the steps in metric and added some information. All the numbers are in cm. I've also included and approximate numbers of BBs you'll need. 1) Make the handle how you'd like. First length of paracord will be 243.84 in front of the handle and 60.96 behind the handle. 2) Second length will be 198.12 3) Third length will be 177.8. You'll need two of this length. ~445 BBs. 4) Fourth length will be 157.48 5) Fifth length will be 137.16 6) Sixth length will be 116.84. You'll need two of this length. ~292 BBs. 7) Seventh will be 96.52. 8) Eight will be 76.2. 9) Ninth will be 55.88. You'll need two of this length. ~140 BBs. 10) Last will be 35.56. For ball bearings, you'll need approximately 880 4mm bearing. From what I see, your best bet will be steel ball bearing if you can't get your hands on BBs. Total length of paracord needed ~17-18m.
Does anyone realize that the fact that Nate is here allows Grant to do bigger projects and we still get regular videos? And he’s not doing a bad job either
For everyone who doesn't really want to watch the whole vid Para cord bullwhip Three quarter inch PVC One inch PVC 30m para cord BB's KT tape Electrical tape 1.Cut the 3/4 inch PVC to nine inches 2.Cut the 1 inch PVC to 1 inch 3.First piece of para cord 8 feet long (8feet in front of handle 2feet behind) 4.Use electrical tape to mark where the bottom of the handle is 5.And 18 inches from the end of the para cord (the fall of the whip) 6.Cut nine more pieces of para cord of diminishig lengths 7.First piece of para cord must go from the first tape mark to the second 8.After that each piece must diminish by 8 inches every time 9.Cut three more pieces of the same length as the 3rd largest;6th largest and 9th largest piece of para cord 10.Fill those with BB's 11.Close the one end off by melting it 12.Take a drill bit a bit bigger than the BB bullet, and stick that in the para cord once you've gutted it, the melt it so it stays open permanently. 13.every foot and a half tape it with para cord once the rope is taped into the handle, After that rap it with KT tape and then your bullwhip is complete!
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this: 1. Don't bother with the longest BB strand- it makes the whip too heavy 2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip 3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well) 5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways. 6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Hassan DM that's not the way to take care of bullies bring it to an adult when I was younger I tried bringing it into my own hands and it didn't help just let an adult know
Haha hi nate! Just want to say well done, you have improved a lot since your first video with Grant:) now you are much more comfortable with the camera and even have your own special style and touch to your video! Keep up the gd work and God bless:))
Jose Lopez ive been here for a year and a half and ill tell you right now, i didnt realize most of this channel's community was close minded fools who cant grow up and accept change
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this: 1. Don't bother with the longest BB strand- it makes the whip too heavy 2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip 3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well) 5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways. 6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Any time you need an aglet on paracord take an old antenna from a radio, put in about 1/2" of paracord into the antenna and just heat up the antenna. Instant aglet and you can make shoe laces that way as well
Fun fact: The bullwhip is incredibly strong because of the mass. As you see, bullwhips become thinner and thinner and because of that kinetic energy has to become more packed and more concentrated. Meaning more velocity (literally just speed) and that means even more FORCE. That's why it says cracka-lacka as it breaks the sound barrier-
Thanks for teaching me a cheap and cost effective way to disipline the children in my basement. Follow up: Works well has a nice crack to it no more trying to run to the landline phone they listen to me now and follow orders well great vid 10/10 would try again.
True - Letters 壊れた {LDR} Wouldn’t he be less likely to hurt himself if he had the ability to use his fine motor skills easily, therefore having more control?
You'll end up adding a few strands. You want the whip to start tapering at about 2 feet from the handle. So if you do what they did and drop strands every 8 inches then you'll need to add strands. 1 for every 8 inches
this is a whip, a cat o' nine tails is a flail and would not need the taper, that it would also be braided with shards of metal in it, basically altogether a totally different build.
I didn't tell you how long it is or how many you need. 550 is the name of the paracord as it can with stand up to 550 pounds before it breaks and 7 strands inside the paracord is the indication of Military grade paracord as the will be consumer grade one out there that doesn't have the 7 strands on the inside of the paracord.
Get a thin straw and put bbs in the straw end then get a stick smaller then the straw and push the bbs in with the straw being big enough to fit in the paracord
An Important Consideration!!! If you're going to make this (and boy do I want to, wow, it looks fun), please don't start cracking it until you've spoken to your immediate neighbors about the noise it will make. Discuss times during the day/week where the excess cracking and sonic booms will NOT be a bother. If you cannot find a time where your local neighbors are not bothered by it (maybe they're sensitive to noise for medical reasons), PLEASE go somewhere secluded to avoid hurting others with the noise. Be mindful of infants as well, as repeated sonic damage like these sounds could do more damage to their hearing than an adult, as an infant's hearing is still VERY sensitive.
Probably going to be drowned by all the other comments, but for all my metric friends out there, I've converted the steps in metric and added some information. All the numbers are in cm. I've also included and approximate numbers of BBs you'll need.
1) Make the handle how you'd like. First length of paracord will be 243.84 in front of the handle and 60.96 behind the handle.
2) Second length will be 198.12
3) Third length will be 177.8. You'll need two of this length. ~445 BBs.
4) Fourth length will be 157.48
5) Fifth length will be 137.16
6) Sixth length will be 116.84. You'll need two of this length. ~292 BBs.
7) Seventh will be 96.52.
8) Eight will be 76.2.
9) Ninth will be 55.88. You'll need two of this length. ~140 BBs.
10) Last will be 35.56.
For ball bearings, you'll need approximately 880 4mm bearing. From what I see, your best bet will be steel ball bearing if you can't get your hands on BBs. Total length of paracord needed ~17-18m.
testing2488 O
I threw u a life preserver cause u said u were drowning :)
Thanks mate!
Lol np man anytime!! : D
This is exactly what i needed, thanks a lot :3
This might be the first thing from this channel I'm going to make.
Potato, Potato me too
Oh hello my loyal potato servent
You should watch his blowgun
I have made blowguns long before this channel was a thing.
I'm not making any of these
Always blows my mind every time i hear the speed it moves and the fact that it breaks the sound barrier
Look up slowmo guys filming the shockwaves.
*Stewies voice* : Cool whip!
Cul khwip
Why are you putting so much emphasis on the “H”?
hwip
Why are you saying it like that?
Saying hwat like hwat?
I wonder how many black gloves do they go through?
Random Stuff alot
Seven
e^x
All of them
Dire Wolf *a lot*
Oh yes so this got recommended when i clicked on a guy with a jacket whipping a big chain
YOOOOOO SAME
Same here. Many people got the same recommendations lol
Wow so its not just me
Same
SAME
Does anyone realize that the fact that Nate is here allows Grant to do bigger projects and we still get regular videos? And he’s not doing a bad job either
I just prefer Grant
Like that "bigger" project yesterday. seems legit.
He is doing a bad job.
I prefer grant too
@@neppynepne wow
“A little bit of tape”
*Buys 3M stock*
Josue Avalos I made that comment sorry I coped you
For everyone who doesn't really want to watch the whole vid
Para cord bullwhip
Three quarter inch PVC
One inch PVC
30m para cord
BB's
KT tape
Electrical tape
1.Cut the 3/4 inch PVC to nine inches
2.Cut the 1 inch PVC to 1 inch
3.First piece of para cord 8 feet long (8feet in front of handle 2feet behind)
4.Use electrical tape to mark where the bottom of the handle is
5.And 18 inches from the end of the para cord (the fall of the whip)
6.Cut nine more pieces of para cord of diminishig lengths
7.First piece of para cord must go from the first tape mark to the second
8.After that each piece must diminish by 8 inches every time
9.Cut three more pieces of the same length as the 3rd largest;6th largest and 9th largest piece of para cord
10.Fill those with BB's
11.Close the one end off by melting it
12.Take a drill bit a bit bigger than the BB bullet, and stick that in the para cord once you've gutted it, the melt it so it stays open permanently.
13.every foot and a half tape it with para cord once the rope is taped into the handle,
After that rap it with KT tape and then your bullwhip is complete!
Bradley Whitburn but its not kt tape
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this:
1. Don't bother with the longest BB strand- it makes the whip too heavy
2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip
3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well)
5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways.
6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Jalen Johnson what a legend
The video is only 11 minutes and it takes more time than that to make the whip
Nathan Meadows what?
wow-probably the third thing im actually going to make it was actually really cool
EWIN GAMING huu
You should include like how long it will take to make, so people can set aside some time
Josh Reck that. Would. Be. Perfect.
READ THIS GRANT^^^
Josh Reck 👍👍👍
Adam Winrich has a 15 min whip tutorial which is probably cheaper than this because paracord is pretty expensive
You can get 50 feet of para cord for like, $6.
“This is how to make a whip with paracord, bb’s, and a little bit of tape”
*ARE YOU SURE IT’S A LITTLE BIT?* xD love this channrl
For real tho
Can this bullwhip be used for self defense and offense?
There are some school bullies I wanna take care of.
Hassan DM that's not the way to take care of bullies bring it to an adult when I was younger I tried bringing it into my own hands and it didn't help just let an adult know
Lol militarism is a reason why you shouldn't do that
All you need is to listen to pumped up kicks.
Yes it can.
Just punch them in the mouth.
Awesome! I never make any of this stuff but I really enjoy watching it!
GAME HAZARD same!!
GAME HAZARD me too
I got 115 likes in 7 hours? Holy sh*t!
GAME HAZARD I made the balloon slingshot.
GAME HAZARD me to
This will be perfect for my plantation
i like both nate and grant because they both are doing hardwork
Would like to see this whip used in super slow motion
Yeah, this is a Slow Mo Guys collab waiting to happen
The Nocturnal Alchemist watch myth buster
The Nocturnal Alchemist Yeah that would be awesome. The sound will be awesome as well.
Wassup dude?
its been done
This guy needs his own channel. “The Prince of Random”.
I love that you upload so many videos at the time
but he doesnt
He has a video out every day for the last few weeks perhaps even months!
Sean nyyx thats what hes been doing with his channel since like two years ago
My favourite video by Nate so far tbh. Awesome project and just a great video overall!
Totally agree! Awesome project.
10:41 I totally thought you had caught your ear or neck with the fall during the swing.
5:24
I love how he uses the blowtorch to melt the string, not a simple lighter...
Jblueskull go big or go home and I right
And now melt the end of the paracord
*uses oxygen and acetylene torch*
Jblueskull h
and now to melt the end of the paracord.
*Flies to the sun*
and now melt the paracord.
*uses magnifying glass*
This video sponsored by tape
Ryan A yep
Daisy brand BB's
A LOT of tape
& Patience
but mostly tape
I made one of these 2 years ago with my grandfather; nowadays it’s all patched up but I credit that whip to being what got me into whipcracking.
When the kids are acting up and you're just like "40 lashings for all of you!"
ben stewart that's morbed af
Funny. But scary
i hope my dad doesn't find this comment
Haha hi nate! Just want to say well done, you have improved a lot since your first video with Grant:) now you are much more comfortable with the camera and even have your own special style and touch to your video! Keep up the gd work and God bless:))
Nate's doing awesome 👍
Who else was hear before this guy came I like him and all but I like grant more
Jose Lopez I prefer grant but I still don't like this dude
Jose Lopez ive been here for a year and a half and ill tell you right now, i didnt realize most of this channel's community was close minded fools who cant grow up and accept change
I like grant too
Yeah
Where did grant go!!!!
Grant, what happened to the draw my life idea
Raihan Islam what happened to Grant
He has no life
Raihan Islam I think he killed grant
It’s Nate!
Don’t listen to the haters mate you’re doing great
He had to put "like indiana jones" so it could be family friendly. Grant smart af🙏🙏🙏
OG what would he have put if it wasn’t family friendly?
MiroER GT slave owners
Grant is dead..
Bade Sky dang that just killed my mood
Platinum how kind of you to remind everyone...
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this:
1. Don't bother with the longest BB strand- it makes the whip too heavy
2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip
3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well)
5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways.
6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Yes this is true i tried it without the longest strand and it saved so much time and still worked
I didn't know you could melt Paracord...that's why I love this channel.
Sure ,
*I CAN MAKE THAT*
Now I’m gonna learn my kids who’s the boss
Thanks, my kids are gonna love it
better starting today this project and hopefully it will be a great present for next years Christmas....
Quitonizee Can't stand the BBs part, huh?
this is super cool
Works so far took a whole day to fill the bbs but it's really cool once done
did the line "where is grant" become a meme?
No
No but we're is he?
rick fire yes.
Should've painted the board black so we could see the cracks
Any time you need an aglet on paracord take an old antenna from a radio, put in about 1/2" of paracord into the antenna and just heat up the antenna. Instant aglet and you can make shoe laces that way as well
You could also use a funnel to fill it with bb's
Josh Pitt or you could use an airsoft speedloader
Josh Pitt lol
Fun fact: The bullwhip is incredibly strong because of the mass. As you see, bullwhips become thinner and thinner and because of that kinetic energy has to become more packed and more concentrated. Meaning more velocity (literally just speed) and that means even more FORCE. That's why it says cracka-lacka as it breaks the sound barrier-
Thanks for teaching me a cheap and cost effective way to disipline the children in my basement.
Follow up: Works well has a nice crack to it no more trying to run to the landline phone they listen to me now and follow orders well great vid 10/10 would try again.
Please make bismuth crystals!
Thanks for clarifying that Indiana Jones used a whip.
Thanks for the help i had some issues on the farm.
ZNA PRODUCTIONS ZNA PRODUCTIONS ZNA PRODUCTIONS
let me fix that for ya ( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)ZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONS
Not even a remotely similar build.
Steve Zukley dude I was gonna comment the same thing!😂
TheTechnosasquatch I mean it’s the same concept but I think the one Eli made was better
Steve Zukley same
Get rid of the gloves. You are only making it more difficult to use your fine motor skills.
Chuck Lynch he might hurt himself tho :\
True - Letters 壊れた {LDR} Wouldn’t he be less likely to hurt himself if he had the ability to use his fine motor skills easily, therefore having more control?
Last Man Gaming 101
Yes that is correct
I made this at home and I was quite satisfied. The sound and the sting are delicious
Make flash rope (Nitrated Fuse)
Notice how they changed the channel name.
Echoify Grant Thomson| King Of Random
Aderp Hugler wasnt it changed along time ago?
Uh it was Grant Thompson- King of Random
About 1-2 months ago
Yes I did notice.
Months ago
Actually made this three times. Very clear instructions. Works amazingly
If I make a longer whip, should I still use the same number of strands and size difrences, or proportionally scale it up
Sidney Wateski most likely scale it
Probably both. If it gets too thick it wont work as easily.
Sidney Wateski idk
You'll end up adding a few strands. You want the whip to start tapering at about 2 feet from the handle. So if you do what they did and drop strands every 8 inches then you'll need to add strands. 1 for every 8 inches
Grant, How is your holiday???
I hope its amazing!
2 years and finally something i have all the materials for
9:01 it’s called the dads belt
Dude looks like he's held hostage.
How
I love it. Made it from your video and the BB's were a pain in the butt.
That last crack you were using is called the sidearm flick
That is actually called a clementine
Wasuup Can you guys do homemade soda with the vacum or dry or liquid nitrogen
Melker Svensson grant has already done that.
I tried this it works great. Thanks for the idea
You should make a fishing rod off of scrap
Can you make a Cat o' nine tails? Like put glass shards on it, and see what you can rip up?
this is a whip, a cat o' nine tails is a flail and would not need the taper, that it would also be braided with shards of metal in it, basically altogether a totally different build.
Paracord Bullwhip is an amazing punk band name
You could have maybe used a BB speed loader to fill it quicker.
9:01 is called punisment for attempting to escape
Your the squire of random, grant is the king
I’d love to see you make a guitar
Grant looks different..
BassManBobBassCovers I think it’s the haircut.
Thats not grant... i hope you were being sarcastic
Tad Strange he is grant. He just have new haircut.
Rasmus H I really hope that you are being sarcastic
That’s note
I will def have to try this
If my mom see this... she wouldnt need wires anymore..
Try colored flames
Brandon Collins This is done by mixing different types of salts.
Might have to try
That whip move you cane up with is actually called the “Dafuq outta here”
Instead of saying let's decorate he should have said let's randomize
*New* *Weapon* *Added* *To* *Your* *Inventory* !
Has anyone actually tried this, it sounds like rocket science
Thanks, I'm now wearing a Adidas tracksuit to hide it when I go to school. only for once. I made mine a lot shorter. I only got to use it for a act.
This was the best video yet! Great job!
Can you heat slime to the point in which it is a gas?
That's just evaporating the water off which would leave all dry components you used in the slime in the container
karl malek no
Daniel Wyatt is right.
Daniel Wyatt and that would probably burn
Can you tell the paracord sizes and
its 550 paracord, Military grade with 7 stands on the inside.
BostonTricker not that I want to know how long is it and how many do we need
I didn't tell you how long it is or how many you need. 550 is the name of the paracord as it can with stand up to 550 pounds before it breaks and 7 strands inside the paracord is the indication of Military grade paracord as the will be consumer grade one out there that doesn't have the 7 strands on the inside of the paracord.
That Steveguy Cant OP listen?? It says it in the video.
Think Creative and helpful fun
Get a thin straw and put bbs in the straw end then get a stick smaller then the straw and push the bbs in with the straw being big enough to fit in the paracord
The views go down every week by thousands because grant doesn’t do the show anymore
No they don't you can't count
Make a gun that shoots flaming rubber chickens
Wtf lol
Wa xD wtf
Link Da Drummer YAS I LOVE IT!
Link Da Drummer Wait IT SHOULD BE KFC! HAHA
You are amazing
Thanks, now I can use this at my cotton field
Love the new guy
Just what I needed 👴🏻
That's so cool I didn't think it would work but wow👏
do a the whip vs fruit
how bout the whip vs a black dude?
You should make a cannon
Idk why everyone' whining "where's Grant" all the time. This guy's great too - makes cool stuff.
I would think a ball chain would be a lot less difficult instead of BBs
might affect with the flexability of the whip though
An Important Consideration!!! If you're going to make this (and boy do I want to, wow, it looks fun), please don't start cracking it until you've spoken to your immediate neighbors about the noise it will make. Discuss times during the day/week where the excess cracking and sonic booms will NOT be a bother. If you cannot find a time where your local neighbors are not bothered by it (maybe they're sensitive to noise for medical reasons), PLEASE go somewhere secluded to avoid hurting others with the noise. Be mindful of infants as well, as repeated sonic damage like these sounds could do more damage to their hearing than an adult, as an infant's hearing is still VERY sensitive.
+Michael Hockey What’s wrong with you?
Run one core rope off of a metal rod(to make the handle) and fill the bbs about a 3rd or soo, and do 3 layers of brades
Can u not use black rope with black tape wearing black gloves on a black table. Because u can’t see anything.
Unbox Amazement would you want me to write in white letters??
.
rekt
Dude, up your brightness
What happens if you mix liquid nitrogen with kerosene after that does it light?
Realistic Gamer007 do you even English bro but in theory yes but might have a different reaction when you light it
Nitrogen is an inert agent. It wont make kerosene more flammable.
once you throw in some of the brading styles the paracord is heavyer and you dont need the weight if your wrist strong enough
Haha im here 4 mins ago (earliest ive ever been