Lol that start and end was so weird 😄. But really good to see you diagnosing the issue and fixing it, the play in the input shaft will most likely mess up the new sensor you put in but at least you know it's issues now. Shame you couldnt be like "I'll have the Chevy and you can keep the Ford 👌" . glad to see another one of your videos again 😀.
Hahaha that was some freakin entertainment rite there lol curious what editing software you use cause your editing skills are top notch like of someone who does editing for a living. Really good troubleshooting and all great video Brayden really impressed!!👍👍
i liked most of it execpt the intro and conclusion not into that stuff i just think youtube channels can make it on good content, don't have to put on a show or as some act stupid when you can tell they are smart
Not a 7.3 IDI's unless its swapped because the IDI's were mechanical (Source: Google, am not a Ford guy). But what'd I'd say is swap it into a truck with a blown 6.0 or something and sell er. Most preferably a crew cab long bed or something of the sorts. That's what'd I'd do at least. The body ain't a gold mine so the engine and trans are the best bet for profit. Another idea is swapping it into your service truck with the blown motor.
You do realize I've had one of these same exact trucks like he has and Ford years was diff from Dodge and Chevy if it's anything made after June it's an 04 etc 7.3 ended (in 03-04) you just stated your not a Ford guy I'm around these trucks all day everyday my dude that's all I specialize in is fords
Your right but finding out whether you have voltage or not, it’s a start. My Land Cruisers injectors weren’t firing last week. Injector harness was pulsing but injectors weren’t firing. Well the voltage was not adequate enough in the harness to fire them. So I added a ground and it fixed issue.
Voltage is never a sign of potential current. You can have 12 VDC at 1 milli-amp, so always check your battery draw with an amp meter (under load). And about the TOPDON, no charger in the world can charge a battery that fast... if that were the case then everyone would immediately throw out their existing chargers and have a TOPDON only and they would rule the world... this is not the case. Electron exchange takes time, always has always will.
God Bless you all! All glory to God! Turn from your sins and live for God! Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”
@39:39 PAUSE It is a pickup and the uncovered wheel if stock should be a clue for those in the know... but I have no idea??? Hit PLAY [could it be DEB's alter ego?]
You keep my wife’s name out of your mouth. Mark my words.
Lol that start and end was so weird 😄. But really good to see you diagnosing the issue and fixing it, the play in the input shaft will most likely mess up the new sensor you put in but at least you know it's issues now. Shame you couldnt be like "I'll have the Chevy and you can keep the Ford 👌" . glad to see another one of your videos again 😀.
Fix it for a part two. Keep it going like a series. Great job, love the trouble shooting and weird intro 👍
Awesome video nephew! I don’t have any idea what you are doing but you edit it the right way to make me actually want to watch anyway.
Honestly, fix and sell it. Someone somewhere is gonna want it. And its content for you too.
The pipe wrench is crazy 😭🤣🤣
Fix it for deb she gotta get around too ya know.... Good to see a young fella doing something constructive!!!! Great work mate🤙🤙🤙🇦🇺🇦🇺🇦🇺
Keep doing this type of content I really enjoy it and it benefits me too so thank you 🙏
So, it wouldn't have been as nearly broken as it was without the help of a fat fingered mechanic "fixing" it.
that was a lot of fun thanks for the video
Pretty good skill set for being so young. You got a good future an career ahead. Keep up the good work
Buddy your videos are amazing!!
Bro is going places
F*** off!! She just told my dog to “f off” 😂
Good work on the duramax!
Enjoyed the video continue the goid witk up. Get the white truck going
Well,, I’ve officially watched every single one of your videos.
Great content
Poor doggo😢 that lady is obviously unhinged 😅
i can’t wait to see you clean up that truck in and out!! ❤
Man i just watched your whole channel in the last two days, Love your video’s and yes please do one on the ford and pt 4 of the skid steer.
Working on skid steer video. It’s been a mess. Machine shop dropped the ball. But more on that later
Nice troubleshooting
TCM is a transmission control module witch is for the transmission. the PCM is for the engine sir
Hahaha that was some freakin entertainment rite there lol curious what editing software you use cause your editing skills are top notch like of someone who does editing for a living. Really good troubleshooting and all great video Brayden really impressed!!👍👍
Just edit on my iPhone tbh. Glad to see ya
Dang how can u edit that good on your iPhone ? Are u using some kind of app? Anyway that shit was funny as hell😂
@@TheHomePros6221 I just use InShot paid version. Thanks appreciate it
Video was sensational awesome
Good job
Maaaaan you awesome
subbed
Mr. Tiger King can you work on my truck 😮😊
Крассавчик,руки растут откуда нужно💪🏼
'...that's what she said!'
i liked most of it execpt the intro and conclusion not into that stuff i just think youtube channels can make it on good content, don't have to put on a show or as some act stupid when you can tell they are smart
Did it bc I wanted too. Not to impress anyone
w video 😊
Mine needed a fuel pump and fuel lines not sure what else
OK.. Yes, of course we want to see the F250 in a video!
And please tell me you fixed the temporary ground issue and how you did it 😢
I just ran a wire to the ecu from battery
They still have TCMs they just are not cheap
what happened to the land cruiser? great vid!
Which one
Mine would turn over but would not start with codes
i wanna see a video on ya new 250. an did deb pack er shit an skidaddle or she still aroun. good luck with all dat.
Due to litigation purposes I’m not allowed to answer many questions ab deb at this time.
Not a 7.3 IDI's unless its swapped because the IDI's were mechanical (Source: Google, am not a Ford guy). But what'd I'd say is swap it into a truck with a blown 6.0 or something and sell er. Most preferably a crew cab long bed or something of the sorts. That's what'd I'd do at least. The body ain't a gold mine so the engine and trans are the best bet for profit. Another idea is swapping it into your service truck with the blown motor.
7.3 ended in 2004 that's a 7.3 can tell by how it looks
@BigCountry96715 not an idi tho. 7.3 ended in 03 aswell
You do realize I've had one of these same exact trucks like he has and Ford years was diff from Dodge and Chevy if it's anything made after June it's an 04 etc 7.3 ended (in 03-04) you just stated your not a Ford guy I'm around these trucks all day everyday my dude that's all I specialize in is fords
@BigCountry96715 but it's not an idi. And I may not be a ford guy but I've worked on them.
You fixed a Chevy for a ford dang man you got took😂😂 jk there both good work trucks👍
Having voltage somewhere doesn't indicate good connection. Voltage drop only occurs when current is drawn
Your right but finding out whether you have voltage or not, it’s a start.
My Land Cruisers injectors weren’t firing last week. Injector harness was pulsing but injectors weren’t firing. Well the voltage was not adequate enough in the harness to fire them. So I added a ground and it fixed issue.
7.3?
El Camino
@33:37 '...oh well, it adds character.'
Boyz running the blood 🩸 fuel ⛽️ .. gotta give her a good prime for a good time. Now smack dash mash the gas and give her hell boi
Wish u could help me out with my truckkk
lower the single cab make it fast.
First 7 minutes: Ion know where that goes
Makes me wonder what the crack head was thinking when he tore this truck up like this. Then disconnected the exhaust, and everything else.
Red badge = LLY
blue badge = LBZ
Did not know that
Not true, early 06 models have the red badge
@@themeat6968 I think you mean 2005...
Fix it
Voltage is never a sign of potential current. You can have 12 VDC at 1 milli-amp, so always check your battery draw with an amp meter (under load). And about the TOPDON, no charger in the world can charge a battery that fast... if that were the case then everyone would immediately throw out their existing chargers and have a TOPDON only and they would rule the world... this is not the case. Electron exchange takes time, always has always will.
I don’t care what charger you use. I’m gonna keep using the topdon bc it charges fast.
God Bless you all! All glory to God! Turn from your sins and live for God! Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”
@39:39 PAUSE It is a pickup and the uncovered wheel if stock should be a clue for those in the know... but I have no idea???
Hit PLAY [could it be DEB's alter ego?]