guages look sweet but you should change the back light for the guages to a white LED bulb and change the needles to white as well that will make it pop more and give more of a contrast, seen as how the oem backlight is orange and the needles are orange
That's not a bulb change,the whole face is the gauges silk screened on an orange film. So the bulb is already white,it just shines thru and orange filter
Gauge cluster goes in so much better when you slide it up into the hole. Tilt it back 45 degrees and pop the wires on. No need for a fancy tool to remove the harness ? And no stress reinstalling the wires or the cluster. You're trying to hold the cluster outside of its resting home. Try closing that gap. Cluster install is a breeze. Literally 20 seconds max
Late comment, but theres a secondary bulb for the airbag light. Its hidden slightly above the other bulb and your not able to remove. What I did is took a small screwdriver and broke the backup bulb. I believe it's there for a safety back up in case the bulb blew. Nice video, love the red!
I really would love the red in my all black e36…. But I’m not that mechanical. I would lose all those screws. Forget where I got them from and break some shut. But how much if I was inclined?
You should remove the NEGATIVE cable, not the positive cable. Electrons are negatively charged and electricity flows from the negative to positive. Even when the positive cable is removed you can create a circuit.
You guys mentioned changing the bulbs. I recently bought myself an e36, took the cluster out and tried replacing two bulbs to the best of my knowledge because half of my cluster will only light up at night where the gauges are. Also my miles don’t seem to ever really show up either but some days all the numbers will pop on for just a minute or so and go back to being halfway lit up. Any suggestions? If it’s not a bulb issue Ik assuming it’s something else internally with me not getting a strong connection with the wiring or with those clips that plug into the back of the cluster.
U can change the whole cluster and convert the miles,even get the special dash light that is triggered only when one tampers with the odometer. There's videos on here instead gotta find them
Anybody know if you can easily swap the little motor that rotate the needles ? I got 2 gauge cluster for my e36 but the one i want have needle issues, km/h and rpm only moove passed 40km/h and 3000rpm that’s seems like a little electric motor issue....
Who likes the recent change of music style?
Me.
meh
got a trick for you bud unplug the airbag module and earth under rear bench no more airbag light 😁
Can u please tell me where can I buy those
The bulb for the airbag is on the right side when you pointed at it on the table it was upside down so took out whatever was on the far left lol
I guess he removed the one for the Front Foglight
on 4 of my e36s it had a bulb and a small red SMD LED on the bored . I guess so if the bulb burned out it would still light up.
You remove the NEGATIVE battery terminal. Not the positive.
amateurs
guages look sweet but you should change the back light for the guages to a white LED bulb and change the needles to white as well that will make it pop more and give more of a contrast, seen as how the oem backlight is orange and the needles are orange
That's not a bulb change,the whole face is the gauges silk screened on an orange film. So the bulb is already white,it just shines thru and orange filter
Really liked the music in this video. Especially the music when you were installing the cluster. Keep cranking them out throtl!!!!!
What is the name of that song? I tried finding it but nothing remotely close popped up. :/
Rusi Rusev Now We Do It Again - Duplex Heart, Anya Gold
Gauge cluster goes in so much better when you slide it up into the hole. Tilt it back 45 degrees and pop the wires on.
No need for a fancy tool to remove the harness ? And no stress reinstalling the wires or the cluster.
You're trying to hold the cluster outside of its resting home. Try closing that gap. Cluster install is a breeze. Literally 20 seconds max
There is a extrea LED on the PCB which lights up when the airbag lamp is broken or removed. I have got also an e36 Class 2
+1
yep, it happened to me as well. didn't bother to find the backup bulb, just left it shine forever
Late comment, but theres a secondary bulb for the airbag light. Its hidden slightly above the other bulb and your not able to remove. What I did is took a small screwdriver and broke the backup bulb. I believe it's there for a safety back up in case the bulb blew. Nice video, love the red!
Now you need to paint those red arrows to black where showing the speed and RPM
The red background makes it difficult to see the red indicator arm. I would suggest painting the arms white.
there goes the foglight bulb 😆
Doesnt look too bad.i wasnt sure at the start going red. And i was wondering about the illumination but it didnt effect it much at all.
I dig the music change
The old owner of my e36 did removed the check light
You can just look at the back piece of the gauges and you can see every light what it is...
Good contrast from the needle to the gage color lolll
I really would love the red in my all black e36…. But I’m not that mechanical. I would lose all those screws. Forget where I got them from and break some shut. But how much if I was inclined?
Wold look better with m3 silver rings?
BRO I wanna buy those Red Gauge cluster. Can you share the purchase link please???
You should remove the NEGATIVE cable, not the positive cable. Electrons are negatively charged and electricity flows from the negative to positive. Even when the positive cable is removed you can create a circuit.
Just remove the airbag fuse lol 😄
I was thinking about doing that to my car but not sure.
Lights that are permanently on aka the check engine light :P edit: oh he says this a minute after XD
you took the one on the far left not the far right
🏆🏆😂 removing the check engine lightbulb...
You guys mentioned changing the bulbs. I recently bought myself an e36, took the cluster out and tried replacing two bulbs to the best of my knowledge because half of my cluster will only light up at night where the gauges are. Also my miles don’t seem to ever really show up either but some days all the numbers will pop on for just a minute or so and go back to being halfway lit up. Any suggestions? If it’s not a bulb issue Ik assuming it’s something else internally with me not getting a strong connection with the wiring or with those clips that plug into the back of the cluster.
U can change the whole cluster and convert the miles,even get the special dash light that is triggered only when one tampers with the odometer. There's videos on here instead gotta find them
Great Video Evan
Where could I get some red backing gauge for a e36
Negative terminal bro
Take a shot every time someone says “so”
I want it too
or just get a 2,0 ohm air bag resistent?
Mickey to the rescue.
where did you get those face canyou send me a link
Email me at evan@throtl.com
I love b18c
Rice rice baby ahhh
love the video just not a big fan of the change and it’s pricey for what it is.
Homie scared me when he said disconnect the positive terminal
So, every BMW in USA is expensive, even an E36 or E46?
What size torx is the 5 screws on the back side??????
what seats are those :)?
More Mickey content
When in doubt call a mikey!
That gauge cluster is pretty rice
Beckerman, wyd, put the music in the description
Anybody know if you can easily swap the little motor that rotate the needles ? I got 2 gauge cluster for my e36 but the one i want have needle issues, km/h and rpm only moove passed 40km/h and 3000rpm that’s seems like a little electric motor issue....
Micky mods FTW
Love ya channel
Thanks!
Love you Evan. So sorry I haven’t binnblowing up the comments. Heart this fo the boys bro. #throttlekings
nice!
Oh no I’m late for the giveaway 😓
first we feast
why 😰
Hmm... not bad dude ;)
#notificationsquad great video :)
Vinec AGaspar 09358702352
projared
# BA squad
Ricer!
whyyyyyyyyyyy
🤮🤮🤮🤮