The Ingersoll Rand 114GQC Air Hammer ruclips.net/user/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
Its too bad we live in a world where labor is heavily taxed while resources are not at all. This should be happening to every old tool, but paying someone to spend a day restoring an item like this costs about as much as buying a new one :(
I TOOK ONE OF THESE APART A FEW WEEKS AGO IT TOOK ME THE WHOLE DAY TO GET IT BUILT UP AGAIN THERE MUST BE 20 PIECES 0R MORE IN THE FRONT ALONE LOVE YOUR WORK AS USUAL,THANKYOU FOR YOUR TIME AND EFFORT
I work in a workshop I repair power tools Doing the same thing in my workshop and i really enjoy it It's amazing how We work the same way even in the end when you hold the drill's bit to check it out i used to do the same lol But i like your painting skills the most And your video recording and editing are amazing i wish I could record my work too Thanks for this amazing video from Iraq ♥️
Olá muitos parabéns .quero agradecer-lhe por partilhar conosco os seus grandiosos ,conhecimentos técnicos em mostrar através desse video como se restaura uma máquina Bosch desse modelo maxi uma qualidade bastante elevada.Eu não fazia ideia de que uma máquina tinha tantas pecas,que podes sem caber numa caixa desse tamanho .Muitos parabéns pela sua dedicação.Voce conseguiu mostrar passo a passo como era possivel transformar uma máquina já bastante cansada pelo seu uso.numa máquina nova.era assim que todos os mecânicos de oficina deveriam fazer nos seus trabalhos de concerto em qualquer tipo de máquinas..para mim mostrou um trabalho perfeitíssimo de muita grande qualidade.Para isso também e preciso ter muito gosto pelo que se faz.mas a cima de tudo ser muito honesto.voce o mostrou muito bem. Assim um conserto desses tem o seu valor, o seu preço justo,pois bem o metesse.Este e um verdadeiro exemplo para todos os técnicos. Que se quiserem ter sucesso tem que dar corda ao sapato nos seus conhecimentos ,e no seu modo como serve o cliente,como você o mostrou.Muitos parabéns pela sua grandiosa dedicação técnica,e pelo seu video de ter partilhado conosco a sua experiência Técnica.Um grande abraço ,e um grande sucesso para os seus próximos vídeos .Manuel Amorim um grande admirador.Chau e até sempre
Ola.muitos parabens pelo seu vide.E muito facinante poder ver a desmontagem dessa maquina passo a passo.Eu nunca emaginei que a maquina tinha assim tantas pessas tan miudinhas, tantos anilhos.exelente trabalho.O senhor aqui a ponhe como nova lavada lubrificada E um trabalho de muita paciencia.Eu sei que para um professional nao deve ser dificil,mas precisa de muita atencao para nao trocar a posicao,ou a ordem das pecas.nao pode sobrar nenhuma para o seu bom funcionamento.Por isso se torna a montagem ainda mais facinante Tudo se faz,e se concegue quando se gosta daquilo que se faz.Esta como nova,e o seu funcionamento esta correto,muito bom.Gostaria um dia me abenturar a desmontar e desmontaruma maquina qualquer que fosse da bosch ou outra Pois sou Electricista de construcao civil ,e tenho abilidade para mecanica ,se qualquer maquina quando vai a oficina tivesse o mesmo tratamento como essa duraria o dobro do tempo na sua vida final,e defenderia assima concorrencia,ea emagem da marca.eu tenho algumas maquinas da bosch desde martelos perfuradores as maquinas aparafusadorasde topo,e estou muito satisfeito comelas sao maquinas bonitas ,muito confortaveis,e muitofuncionais.Eu facomuita confianca na marca,e nao me importava de comprar algumausada,e recuperada com essa qualidade de reparacao.E verdadade que uma reparacao como essa ficaria um pouco cara,masdeveria compenssar muito.Agradeco muito a demonstracao do seu video na questao de recuperacao,e raparacao estava perfeito,e se aprende muito a lidar com a mecanica.Parabens gostei muito.Um grande abraco,e umbom socesso nos proximos videos a nas proximas reparacoes,recoperacoes.Muito obrigado pela sua tam grandeoza dedicacao.
This is amazing work. I don't know how you remember where all the parts go. You're gifted, for sure. Thanks for sharing your incredible skills. I'm wondering, though; with all the time, effort, and resources employed in repairing the tool, wouldn't you be better off replacing it altogether?
Danke dass du diesen armen und ungeliebten Boschammer zurück ins Leben geholt hast. Wieder mal ein sehr gutes Video. LG Dennis :-D Thank you for bringing this poor and unloved Boschammer back to life. Again a very good video. LG Dennis :-D
Good rebuild. Those are good hammers, if you can and have use for it, keep this one. I have several units bought for my team and with the exception of one that snapped the piston's skirt in a freak accident, they've been in hard use for a while now. One of Bosch's better tools in their "newer" line up.
Looks like powerful tool, but it is so heavy! Still, nice restoration. Nice to see a quality tool saved from the dump. It is probably better quality than the homeowner grade junk you find in hardware stores nowdays.
@@SJMp3 Probably lack of good quality check at end product.Also badly payed workers will make crap stuff.Bosch from Hungary is really good or really bad and Taiwan is better than China.I found Bosch tools on flea market made in Malesya and Germany,I cant tell are they original.
@@Dirtyharry70585 why is the location of the factory important? as long as the procedures are the same, it could be produced anywhere with the exact same quality
Hermano del Mundo, Realmente Fantástico!!!... Como siempre, Te Felicito!!!... Le devolviste la belleza a éste Martillo de Demolición!!!... Saludos desde Venezuela!!!
When I spun the motor with a socket and drill, the armature gear was not engaging the hammer gear. What could be the reason? what should I replace? The hammer drill (slightly newer model) continuously cuts out while hammering and sometimes the drill portion stops working
The Ingersoll Rand 114GQC Air Hammer ruclips.net/user/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
As a tradesman myself and having used these tools it amazes me how many components are in these tools and the engineering involved in making them.
Kohletausch bosch flex
That was built like a tank. Great restoration job.
Its too bad we live in a world where labor is heavily taxed while resources are not at all.
This should be happening to every old tool, but paying someone to spend a day restoring an item like this costs about as much as buying a new one :(
i don't know which is better;
your video editing skills or your refurbishment skills.
Thank you for the video.
You're welcome :D I am glad you watch my vide.
This is surprisingly satisfying to watch
I'm glad you like it.
I’ve now picked up an obsession with demolition hammers. Will get a used one day and do the same thing.
Love the care the thoroughness of your work.
Thank you!
I TOOK ONE OF THESE APART A FEW WEEKS AGO IT TOOK ME THE WHOLE DAY TO GET IT BUILT UP AGAIN THERE MUST BE 20 PIECES 0R MORE IN THE FRONT ALONE LOVE YOUR WORK AS USUAL,THANKYOU FOR YOUR TIME AND EFFORT
I work in a workshop
I repair power tools
Doing the same thing in my workshop and i really enjoy it
It's amazing how We work the same way even in the end when you hold the drill's bit to check it out i used to do the same lol
But i like your painting skills the most
And your video recording and editing are amazing i wish I could record my work too
Thanks for this amazing video from Iraq ♥️
RUclips brings us this conversion. I'm so glad while reading your comment. Anyway thank you so much!
Awesome refurbishment, great video, very detailed and well produced. Thank you for sharing.. 👍🍀😁
99% of people would throw it out, But you and only a small amount of people restore it, Looks great! Good job 👌😁
Wss
That's been well looked after.
Nice job restoring it.
Olá muitos parabéns .quero agradecer-lhe por partilhar conosco os seus grandiosos ,conhecimentos técnicos em mostrar através desse video como se restaura uma máquina Bosch desse modelo maxi uma qualidade bastante elevada.Eu não fazia ideia de que uma máquina tinha tantas pecas,que podes sem caber numa caixa desse tamanho .Muitos parabéns pela sua dedicação.Voce conseguiu mostrar passo a passo como era possivel transformar uma máquina já bastante cansada pelo seu uso.numa máquina nova.era assim que todos os mecânicos de oficina deveriam fazer nos seus trabalhos de concerto em qualquer tipo de máquinas..para mim mostrou um trabalho perfeitíssimo de muita grande qualidade.Para isso também e preciso ter muito gosto pelo que se faz.mas a cima de tudo ser muito honesto.voce o mostrou muito bem. Assim um conserto desses tem o seu valor, o seu preço justo,pois bem o metesse.Este e um verdadeiro exemplo para todos os técnicos. Que se quiserem ter sucesso tem que dar corda ao sapato nos seus conhecimentos ,e no seu modo como serve o cliente,como você o mostrou.Muitos parabéns pela sua grandiosa dedicação técnica,e pelo seu video de ter partilhado conosco a sua experiência Técnica.Um grande abraço ,e um grande sucesso para os seus próximos vídeos .Manuel Amorim um grande admirador.Chau e até sempre
U are doing refreshing because Bosch won't die 😎
Довольно кропотливая проведена работа и достойна уважения. Одно дело разобрать, так после еще нужно все собрать.
Поэтому под запись разборка.
Very good restoration of a very good Bosch rotary hammer drill.
Thank you very much!
Ola.muitos parabens pelo seu vide.E muito facinante poder ver a desmontagem dessa maquina passo a passo.Eu nunca emaginei que a maquina tinha assim tantas pessas tan miudinhas, tantos anilhos.exelente trabalho.O senhor aqui a ponhe como nova lavada lubrificada E um trabalho de muita paciencia.Eu sei que para um professional nao deve ser dificil,mas precisa de muita atencao para nao trocar a posicao,ou a ordem das pecas.nao pode sobrar nenhuma para o seu bom funcionamento.Por isso se torna a montagem ainda mais facinante Tudo se faz,e se concegue quando se gosta daquilo que se faz.Esta como nova,e o seu funcionamento esta correto,muito bom.Gostaria um dia me abenturar a desmontar e desmontaruma maquina qualquer que fosse da bosch ou outra Pois sou Electricista de construcao civil ,e tenho abilidade para mecanica ,se qualquer maquina quando vai a oficina tivesse o mesmo tratamento como essa duraria o dobro do tempo na sua vida final,e defenderia assima concorrencia,ea emagem da marca.eu tenho algumas maquinas da bosch desde martelos perfuradores as maquinas aparafusadorasde topo,e estou muito satisfeito comelas sao maquinas bonitas ,muito confortaveis,e muitofuncionais.Eu facomuita confianca na marca,e nao me importava de comprar algumausada,e recuperada com essa qualidade de reparacao.E verdadade que uma reparacao como essa ficaria um pouco cara,masdeveria compenssar muito.Agradeco muito a demonstracao do seu video na questao de recuperacao,e raparacao estava perfeito,e se aprende muito a lidar com a mecanica.Parabens gostei muito.Um grande abraco,e umbom socesso nos proximos videos a nas proximas reparacoes,recoperacoes.Muito obrigado pela sua tam grandeoza dedicacao.
Вы проделали большую работу! Спасибо за ваш опыт!
Excelente trabajo!!! Te felicito!!! Tengo el mismo martillo, vos me podrías orientar porque el mío funciona pero no percuta???
I feel like this is the guy that puts tools back together for AVE.
Lol
At first I thought this was an AVE video but then I realized it was already unboxed and used
This guy is the healing bench
Tot
@@Coconut7403 9
This is amazing work. I don't know how you remember where all the parts go. You're gifted, for sure. Thanks for sharing your incredible skills. I'm wondering, though; with all the time, effort, and resources employed in repairing the tool, wouldn't you be better off replacing it altogether?
thats some great German engineering in that hammer. It is very beautifully put together.
It works for it is designed, also tomorrow. No cheap plastic toy...
I’ve watched your videos from the start - all great, but this was one of your best! 👍
Thanks! 😃
Great skills and camera work!
Danke dass du diesen armen und ungeliebten Boschammer zurück ins Leben geholt hast. Wieder mal ein sehr gutes Video. LG Dennis :-D
Thank you for bringing this poor and unloved Boschammer back to life. Again a very good video. LG Dennis :-D
You're welcome, thank you!
Increible la calidad de bosch, el taladro tiene pinta de tener muchos años y haber trabajado mucho y las escobillas estan perfectas
Good rebuild. Those are good hammers, if you can and have use for it, keep this one. I have several units bought for my team and with the exception of one that snapped the piston's skirt in a freak accident, they've been in hard use for a while now. One of Bosch's better tools in their "newer" line up.
Yes I will keep it. I feel more easy to use with this tool while testing. Thank you for sharing!
You are an artiste of this work, very good. Thank you!
Very good job step by step you reall deliver and you are neat and clean thanks for the knowledge
I think this guy is a Bosch power tool technician that he can easily fix it back in a proper way.
Looks like powerful tool, but it is so heavy! Still, nice restoration. Nice to see a quality tool saved from the dump. It is probably better quality than the homeowner grade junk you find in hardware stores nowdays.
I have one of these and it is a real work horse. Breaks and drills concrete like nobody's business!
Holy moly! Fantasic job on that one, nicely done 👍🏼
Sir san ang shop mo ganyan din hammer ko bosch brand
I’m actually shocked how well that went. The way the Germans over engineer everything, I expected it to be way more complex.
sadly many of their tools are made in china and are not the same quality
@@Dirtyharry70585 Not all is from China, Bosch factories stay also in Hungary or Taiwan.
why is everything from china badly rated?
@@SJMp3 Probably lack of good quality check at end product.Also badly payed workers will make crap stuff.Bosch from Hungary is really good or really bad and Taiwan is better than China.I found Bosch tools on flea market made in Malesya and Germany,I cant tell are they original.
@@Dirtyharry70585 why is the location of the factory important? as long as the procedures are the same, it could be produced anywhere with the exact same quality
The production of Demolution Hammers is still in Germany.
Amazing to watch, thanks for the show!
8:26 This is impressive. Using a grinder to cut the band without damaging the part underneath whatsoever.
I dont know how yu do it..
Asome work man!.
Good job friend, 👏👏👏
Best one so far
Thank you!
Can you tell the wiring of the speed governor please. Great video.
Amazing work!!
I still use mine on a weekly basis. Things built like a tank!
Tbh then it probably breaks down a lot.
Tanks a maintenance intense.
It's a very nice resto. I especially like your choice of hammerite paint for the finish
Thank you very much!
Wow awesome job .
Great job as always.
I do enjoy how your previous restorations make special guest appearances in your later videos....
Well done Sir!
Thank you very much!
made in german ... made in bmw humm good restoration . I really like your restoration. very good.
Thank you very much!
that is very impressive bro, i use one of those on a daily basis
Nice 👍
Good work Done👌
Thumbs up 👍
👏 👏
Thank you so much
Gosto dos vídeos dele que é tudo perfeito tudo bem explicado parabéns meu amigo aprendo muito com você!!!
incredible job
Great job 👍🏻👍🏻👍🏻
Great video! One question: What kind of assembly lube (grease) did you brush on?
WELL DONE!
Muchas Gracias por compartir este video!!!! Me facilitó el rearmado.
Great video Weldon
Hummer its self doesn't look too old it looks like left somewhere and forgotten or flooded by the way great job done 👍
Complimenti sempre il massimo!!!!!!!!!
У меня такой бош тоже был только после разбора и ремонта работать стал лучьше и работает вот уже 6лет.хорошая машинка и не подводит никогда.профи!!!👍💪
Hermano del Mundo, Realmente Fantástico!!!... Como siempre, Te Felicito!!!... Le devolviste la belleza a éste Martillo de Demolición!!!... Saludos desde Venezuela!!!
:D
Muchas gracias!
I love your videos.. from Maldives
Very nice work
Same new drill 👏👏👏👍
Great restoration. 👍👍👍
Thank you! 😊😊😊
awsome rebuild.
Thank you!
Perfekt work!!!! but how many oil u Put in ? wishes
I think it works netter than a new one!😎
Perfectionist - nice job
Excellent video as usual.
Thanks again!
Nice work
We have the larger one of these at work they are excellent machines
)
Lucky I have the same one ! In working condition, it wasnt serviced for like 8-9 years :O
But to say I didnt know it had piston.
I loved that mini piston!
Very good job, bravo.
Cómo activas el modo "encendido"sin estar puchando?
Gracias
Keep up the good work 👍
Super nice video thanks brother good,👏👏👏👏👏👌👌👍
Las felicito todo muy bien explicado
Dude, I love this channel!
Very good restoration 👍👍👍Thanks for sharing You should restore the case too
Thank you, Yes I will restore the case. Because of the video a bit long.
Excellent 😊
That looks better than mine and I still use it daily
Wow. Very good. 👌
very good channel
Great job
Exelente trabajo felicidades
This is a great restoration work. Great skills to perform this job.
Did the ol' dont pre lube the gears at all, but just let the heat from all the friction melt the grease into place.... sort of / eventually ?
You have very nice shoes!
Thank you! 😊It is construction shoes.
wow very good job sir
Great Job
Great video!
When I spun the motor with a socket and drill, the armature gear was not engaging the hammer gear. What could be the reason? what should I replace?
The hammer drill (slightly newer model) continuously cuts out while hammering and sometimes the drill portion stops working
Incredible!
Thank you for sharing your wonderful videos I am from South Africa
You're welcome, I'm glad that my video popup in South Africa.
This get better than original
Seu trabalho muito organizado parabéns dou valor
Great video 👍
Great jobs colega
Thanks for the visit
Excelente trabajo...lo mas
Good work buddy
Thanks for the visit
ho, you're so good at it.
Hola como se llama la pieza que detiene el jiro del motor la blanca que hace que el motor no baje mas
Are these types of content better than the ones with commentary?