Summerboard SBX Freshies - How to install
HTML-код
- Опубликовано: 6 сен 2020
- The Freshies just came in the mail so its time to install them on the summerboard and also fix a couple of little things!
Check out Zacks Channel! - / @zac_p
My Patreons are absolute legends! Support the channel here - / leewright
Check out my shop! - www.electricskateboarding.co.uk
10% off at Shredlights - use code "LEE10" for 10% off!
$100 of Summberboard purchases with "Lee100"!
Contact me!
Email - LWPinbox@gmail.com
Instagram - / carveuk_lee
My filming Equipment
Sony A6500 - amzn.to/2XZjPv2
Sigma 18mm F1.4 - amzn.to/2R51ifi
Gopro Max - amzn.to/2sysAk7
DJI Mavic - amzn.to/33AtMAn
Panasonic LX10 - amzn.to/35LFIR8
Products I like
Shredlights! - shredlights.com/collections/a...
Orangatan Caguamas - amzn.to/2OX30gg
Flatland 3d Pro Esk8 gloves - flatland3d.com/shop/all-produ...
Magnetic remote charging - amzn.to/2OBa4jw
Safety Gear
Half shell helmet - amzn.to/2R2Bz7j
Full face helmet - amzn.to/37Rbpuf
Body Armour - amzn.to/2DIuKA5
Knee Pads - amzn.to/2L8Y5b0
Gloves - Flatland 3d Pro esk8 - flatland3d.com/
My Favorite tools
Wera Hex Keys - amzn.to/2OZET0o
Ifixit driver set - amzn.to/37S4f8S
#summerboard #freshies
Just one thing to add. There's two grub screws in each sprocket. That's why it was so hard to slide off the shaft! I figured that out the hard way. And the buggered bearing on one side is most likely due to over tensioning the drive belt. I have mine quite loose and they don't slip at all. Thanks for your video Lee, great job!
Hey bro! I'll pin this, but mine is an early version with only 1 grub screw, later ones got two! Mine is a gen 1 SBX with the carbon fibre deck etc
Hi Lee, and anyone watching Lee's video who may be taking on this mod anytime.... As far as rounding hex driven fasteners is concerned, and especially in situations like this where you might be looking at USA hardware, get reliable info about the EXACT fastener size - it might not be metric and an Allen key that seems to fit but is not the EXACT fit will ream out the fastener very easily. Found this out the hard way working on avionics gear built in the States with metric tools here in the UK. Hope this is helpful for someone. I love your vids by the way Lee, I'm an e-mountain boarder myself, but just watched this summerboard vid 'cos I enjoy all the videos you produce so much!
So the m4 12mm socket head isn't correct for the motor hardware?
That does look like a rough road problem solving solution, Lee. I will be awaiting the road test result. Well done, Lee.
Hey David, ta mate! Csnt wait ti ride the board actually, it's been a while!
I’m loving the different mechanisms we can use to injure ourselves LOL
Looks like fun!
Great vid m8
thecharliepanther haha! So true mate
Looking forward to seeing this in action. They look like loads of fun but totally mental at the same time 😂
Yeah.. shopping trolley crossed with an eboard 🤣
Nice vid Lee. Good work in the skate park boys!
Big love chuck!
Interesting that aaron was asking you about using cloud wheels as center wheels. I was thinking about using them but figured they were too huge!
Thanks for the perfect guide! Great content so much detail about the board.
Yeah I guess he would have approached them to make a smaller version? Thanks man!
Needed this thanks mate
Great video, exactly what I needed! Is there any reason to keep using the Powerballs? Is there an advantage when you compare them with the Freshies?
I saw the link to the Orangatang Caguama 85 mm Longboard Wheels, are these a good choice for the Summerboard?
Fresh hair cut to install those freshies. Cool tutorial!
Indeed bro! Thanks
Great video as always mate. What mic are you using? It’s crisp!
Rode wireless go mate, my Patreons bought it for me!
hi lee ，what tool u used to loosen the screw inside the centrel wheel pulley？ i tired few tools all broken and that little screw almost broken too . it kind ruin the whole thing. cant get that pulley off and cant put it on....
Lee Wright hi you installed more comfortable wheels you did a fresh haircut 👍👍👍👌✌️🤙✌️🤙 ( I used google translation I hope there will be no error )
Ali-Rotor Eskaterider hehe cest bien mon ami! 😁
Got the fresh haircut. 😎
Yeah bro! Had to chop it off in the end 😅
Hi Lee! I have been watching your Summerboard vids and finally took the plunge an got one in their Black Friday deal and it arrived today! I have a couple of questions I was hoping you could help me out with? First off, I have been trying to join the official WhatsApp group but for some reason it doesn’t work. I think you mentioned a UK group. Is that the same one or something different and how can you join? Also, I got the SBX but noticed the deck is Maple (same as the SB1) and not Carbon as I was expecting but think you may have mentioned something about this previously, so I wanted to check what the deal was? And advice would be great! Cheers, Chris.
Yo, great channel mate, really been informative about Summerboard. Only question - I see content on the board has dried up. Do you simply prefer mountain boarding or is the summerboard not worthwhile? I'm tempted but I'm super on the fence still.
It's a good question. Honestly it's about availability of good weather and good terrain which we have neither of here in the UK. It really is a summer board! Makes it hard to get out on it
@@LeeWright Understandable, I ruined my MCL riding my manual longboard in the rain a few years back, the extra speed would certainly make it sketchy.
I'm really looking for a fun casual board I can ride around Salisbury (lots of hills). Ideall Skatejoring with my husky pup. Would you recommend one of the MTB boards instead for all year use?
@@bhinkle420 Absolutely bro! of course im going to recommend my own board the Apex Predator. We aren't too far from you so perhaps we could get out for a test ride. You can check my eMTB out at www.electricskateboarding.co.uk
Where did you get your bearings from
You know how to do b-roll bro 😍😍😍
Super cool that SummerBoard is listening to their customers!
Yeah bro they do listen, I like the company
Great video my friend, the board that goes sideways :)
Yeah! Hoping I can use it more in future
Hi Lee, how you fit the da blues to the board. i found it shorter than the summerboard wheels. i didnt see any space between your wheels and trunk. how did u put the washers?
I just put 4 washers between the axel and the wheel bro.
@@LeeWright it works. thx bro. one more thing, will it scratch the belt if no risers on for da blues? i didnt compare the difference between original wheels but i found the belt is really close to the ground.
Nice Freebord MFG Edge wheels DaBlues. Q: What happens with all those holes when the Center wheel wear down?
Preston Milford will take a while I expect. Yeah I love the da blues
That’s what i was wondering as well!
Really Nice Video as always 👌
Thanks brooooo
@@LeeWright all day big Bro. Been uploading more often and learning alot. When you have the time stop by check my experience out.. be safe Rider!!!!
Great video but I’m stuck. One of my pulley wheels will just not come off. Both grub screws are out. I’ve tried a small crowbar, a hammer, put some WD40 on it without success. It does look like some locktight was used when it was mounted at the factory (unconfirmed but I can see some blue stuff). Any tips on what else I can try?
Heat! Have you got a heat gun or a creme brule torch? heat the pulley and it should come off
@@LeeWright thank you Lee, I’ll will try to source a torch and give it a go.
The torch got it moving slightly but it would still not come off the center wheel shaft. I am glad to report that SB is sending me a replacement gear wheel and side plate for me to install my freshie. Question for you, what size are the bearings use for the center wheels? My understanding is that these are different than the outer wheel ones. Thanks.
@@rackasa I contacted SB, but haven't gotten a response. The gear will not come off of my wheels. How did you contact them?
For those doing this, fyi there are two grub screws. Need to loosen them both.
The pinned comment explains that early versions like mine have 1 grub screw and later revisions have two. Glad you got it sorted dude
@@LeeWright thanks I should have seen that. In any case I appreciate your tutorial. It was very helpful.
@@360vroomers it’s no dramas mate, at least it was enough to get you by. I have an extremely early board with many differences to the later ones so it’s only natural things change etc
I wish my pulleys came off like that with a little bit of leverage. Im snalling off picrs of metal trying to use leverage
I can't get mine back on
Same here, how do you out them back on, impossible
My wheel Polly acts like it’s not meant to come off
Dude I cannot get that screw loose on the pulley. It’s wayyy too tight
Hi mate! Could you add me to the Summerboard UK group please?
Aiiii. I need your phone number. Message me on Instagram
@@LeeWright hey man! Think am following you now and should have sent you a message too 👊🏽