nearly every complication I've had on the road, I came here to search for a solution. I've taken on many of your vehicle saftey procedures. thank you for making these videos. hoping you can make a mini Cooper door glass video. and maybe also a newer model dodge charger rear door glass video.
So, how do you do freight liners alone? The company I work for forced me to do it alone. I almost quit, my dispatch told me to RUclips how to do it alone. Told me I couldn’t get any help and reschedule is not an option. My managers are cool but they don’t work Saturdays. My dispatch is the reason I almost quit
william arnold I really don’t do them by my self the glass is to heavy and it gets contaminated when maneuvering to set the glass. I done it by my self once by getting the glass really close to the pins on the bottom than lift the glass and set but it’s even more difficult when they gave a visor. But it’s really not worth doing it by yourself.
Alfredo, your videos have help tremendously. Could you tell me or do a video on how you sharpen your cold knife blades and your btb tool? Thank you for taking the time to do these videos for all of us to learn.
CatandChris Bailey just uploaded a video on how to sharpen the BTB blades. I took a while do to the fact that I wanted to explore and find the best method. Thank you for taking the time to watch my videos.
Obviously you can scratch the paintwork with power tools away from the glass but can the vibrating hook style blade scratch the paint work underneath the glass/urethane and is it an advantage doing the removal in hot weather to soften up the urethane or is that stuff completely hard no matter what the weather is? When i saw your other video removing with a power line i wondered why you didn't do that for all vehicles. What's are the pros and cons of both techniques. I'm guessing here but would using the power line increase the chances of the glass shattering under extreme pressure, and paint work scratches from using power tools? Thanks.
Hey Alfredo - I got a shop do my F80 M3 recently which is a 2018 and the same body of this car.. how do you avoid seeing the urethane from inside the car? this wasn't like that during factory. They'll come out and do it again but, when the sun shines i can clearly see the urethane coming through the a pillars which isn't a OEM thing. Should they use OEM BMW Adhesive?
No they either ran to large of a bead or ran it to close to the interior a pillars most aftermarket adhesives meet or exceed manufacturers recommendations anyways
Have you ever used a m12 urethane gun ? I have a 18v one but I would lie to get a 12v as a spare. Also , do you do the recalibration on lane departure vehicles? Thanks in advance.
Anthony Tiedt I haven’t owned a 12v my self, so I really don’t know how good it works. Yes we have a recalibration system and we do recalibrate. Highly recommend it.
Regular scott blue painters tape, but only for 2 -3 hrs since I use fast cure urethane and it cures really fast. I personally don’t recommend leaving it over night.
Hey Alfredo, Rocky here with Alice Auto Glass in Alice Texas , you have some great videos , love your work ethics, need your help, I just purchased the 18 volt multi tool and blades from equalizer but not sure what adapter or washer your using to hold blade down, do I need to do any modifications, thank you Alice Auto Glass
Mr. Gong先生 There’s many reasons why vehicles have moldings some of them are just cosmetically, some have a rain channel, some help with the vehicle aerodynamics. If Vehicle is equipped with moldings we reinstall moldings back.
Hi im the installer too..but i dont have any tools like you use to remove the winshield..you know i use blade cutter to removed the winshield..thats so hard to removed..i wish i can buy like your tools..
Its sunny outside and the BMWadhesive is really soft, why not use a regular cold knife? That feinsetup looks scary, all that vibrating is going to get back at your hands and underarms if you do it enough.
evan castillo on vehicles that the urethane is applied to the very edge to the glass all the way around its better to apply to the glass also the pinch weld have to be straight as well. But I do prefer to apply urethane to the body on vehicles that I could possibly miss where the urethane goes. Specially in Japanese cars where the urethane goes uneven on the bottom.
What tool did you use to cut the glue/bottom of the glass? It looks like a Sawzall. And what adaptor did you use to attach it? What was the plastic board you put on top on the dashboard? What is that tool you use to cut the extra glue off? after the glass was removed? Also I notice there was a second tape that was attached to the new glass, I seen the first tape, which is to align the glass to the body, what was the second tape for? Can you send me the link on the cordless tools and blades you use please. This help me replace windshield on bmw. Thank you
JAE MARPLE I would recommend you to used a wire of fiber line cut out tool for removal of the glass I use the BTB scraper to remove the left over urethane.
@@AlfredosAutoGlassRepairCorona At my working place, which is bmw dealership, we use a wire fiber line cut out tool to cut the glue off the windshield. after seeing you used the milwaukee oscillating with the blade attachment to it, this would make me faster on removing the windshield. What blades are you using, that is attach on the milwaukee oscillating?
JAE MARPLE part numbers for blades are 51848 and 51849 from Equalizer if you are using fiber line or wire keep doing that is much better for you and for the car. Faster is not always the best
Adham Aladhami definitely better to apply glue on glass when the pinch weld on vehicles is flat and smooth. As long as you apply the glue right where it goes otherwise you could really mess up. I decide my self base on the what kind of car it is. Thank you for watching my videos
Alfredo's Auto Glass Repair Corona I have been working with safelite auto glass for 4 years and some of the things you would say reminded me of safelite and belron. I had a feeling you worked with an affiliate of belron. I'm glad you were able to start your own business
Развлечения
nearly every complication I've had on the road, I came here to search for a solution. I've taken on many of your vehicle saftey procedures. thank you for making these videos. hoping you can make a mini Cooper door glass video. and maybe also a newer model dodge charger rear door glass video.
A very professional job with a lot of care, without any damage on the vehicle. Perfect!
I purchased some anti vibration gloves today! Excited to use them with you brother
Just might have to drive down there from the bay... Excellent service in all your videos!
cdalag thanks for the compliment. I would be happy to work on your car!
I’m an installer and I’ve learned a lot from you and thank you for all the tips
william arnold I’m happy to hear that.
So, how do you do freight liners alone? The company I work for forced me to do it alone. I almost quit, my dispatch told me to RUclips how to do it alone. Told me I couldn’t get any help and reschedule is not an option. My managers are cool but they don’t work Saturdays. My dispatch is the reason I almost quit
william arnold I really don’t do them by my self the glass is to heavy and it gets contaminated when maneuvering to set the glass. I done it by my self once by getting the glass really close to the pins on the bottom than lift the glass and set but it’s even more difficult when they gave a visor. But it’s really not worth doing it by yourself.
Great! You a re a professional guy. Thanks for sharing.
Buen trabajo Alfredo
Gracias por subir tus videos realmente me han ayudado a mejorar mucho en mí trabajo.
Amazing install you are my idol. Would be so kind to do a video showing us how you set up your work van. I would really appreciate it
Alfredo, your videos have help tremendously. Could you tell me or do a video on how you sharpen your cold knife blades and your btb tool? Thank you for taking the time to do these videos for all of us to learn.
CatandChris Bailey just uploaded a video on how to sharpen the BTB blades. I took a while do to the fact that I wanted to explore and find the best method. Thank you for taking the time to watch my videos.
Awesome Install. What is the model number on the milwaukee cold knife tool?
Very cool
Good job brother
Mauro Clemente's thank you!
I have a 2014 bmw 328i is there a problem with installing after market winshield would it affect HUD
What is the glass primer and what does it do to the glass??
Very good video.
Evident Auto Glass thank you 😊
Obviously you can scratch the paintwork with power tools away from the glass but can the vibrating hook style blade scratch the paint work underneath the glass/urethane and is it an advantage doing the removal in hot weather to soften up the urethane or is that stuff completely hard no matter what the weather is?
When i saw your other video removing with a power line i wondered why you didn't do that for all vehicles. What's are the pros and cons of both techniques. I'm guessing here but would using the power line increase the chances of the glass shattering under extreme pressure, and paint work scratches from using power tools? Thanks.
Q tal amigo Alfredo,pregunta q Mark son tus ventosas o chupones?
Would be nice to see a video on how you set up your work van I have to keep looking over your shoulder to see. I would really appreciate it.
good job
Redouane ka Thank you!
Very Nice Job！！！！
What's the brand/model number of the rear view mirror clamp you used to clamp the rear view mirror at the end?
This is where I got mine from But you could buy it from your local auto glass supplier
www.equalizerfusion.com/Products/ProductDetail/803
Hey Alfredo - I got a shop do my F80 M3 recently which is a 2018 and the same body of this car.. how do you avoid seeing the urethane from inside the car? this wasn't like that during factory. They'll come out and do it again but, when the sun shines i can clearly see the urethane coming through the a pillars which isn't a OEM thing. Should they use OEM BMW Adhesive?
No they either ran to large of a bead or ran it to close to the interior a pillars most aftermarket adhesives meet or exceed manufacturers recommendations anyways
Is the windshield OEM? if not what brand did you use?
How did you learn how to do this?
And can you please list the equipment you use in the description
Have you ever used a m12 urethane gun ? I have a 18v one but I would lie to get a 12v as a spare. Also , do you do the recalibration on lane departure vehicles? Thanks in advance.
Anthony Tiedt I haven’t owned a 12v my self, so I really don’t know how good it works. Yes we have a recalibration system and we do recalibrate. Highly recommend it.
You vive me The link of that knife?
I have a 2021 bmw x3, I need a front windshield, please let me know if u have one, I am cool with a used one, thanks
What wide size would you recommend for BTB winged anti-scratch pinchweld preparation blade for bmw? 1", 3/4", or 1/2" wide?
JAE MARPLE for a factory BMW Bead ,top and two sides 3/4” ,for the bottom 1”. But I mostly use 1” 90% of the time on all vehicles
@@AlfredosAutoGlassRepairCorona thank you
ALFREDO SUBE UN VIDEO INSTALANDO EL WINDSHIEL DE UN 69 MUSTANG Ò 57 CHEVY..
With all of the different paint finishes, what type tape do you use.
Regular scott blue painters tape, but only for 2 -3 hrs since I use fast cure urethane and it cures really fast. I personally don’t recommend leaving it over night.
Camarada échale ganas
Alfredo, you do it right.. Bob from AGU sent me to your videos
jake jakins thank you! I hope they are helpful to you.
Hey Alfredo, Rocky here with Alice Auto Glass in Alice Texas , you have some great videos , love your work ethics, need your help, I just purchased the 18 volt multi tool and blades from equalizer but not sure what adapter or washer your using to hold blade down, do I need to do any modifications, thank you Alice Auto Glass
Alex Ramis check out thus video ruclips.net/video/rR2NsNibCdc/видео.html
Is that the umbrella that uses a suction cup to the top of the car?
william arnold no this one has a concrete stand.
Can u tell us where to buy that Milwaukee tool?
aznjuvenil3 Home Depot online or in store have them.
hi Alfredo it's Miguel form Florida what is the toolbag that you are carrying Miguel
Miguel Gomez I try looking for a link where you could buy it but Home depot discontinued it. But thats where I bought it from.
Calibration?
Hola Alfredo como se llama la maquina que tienes para desprender el parabrisas del carro
La roja esque vivo en canada pero no encuentro los picos para adaptarlos ala maquina tengo una dewalt
What is windshield molding use for?
Does it must have up left and right?
Mr. Gong先生 I replace the top molding which is an underside molding and the two side moldings are reusable.
Alfredo's Auto Glass Repair Corona does the rain sensor re useable?
Thanks
Mr. Gong先生 There’s many reasons why vehicles have moldings some of them are just cosmetically, some have a rain channel, some help with the vehicle aerodynamics. If Vehicle is equipped with moldings we reinstall moldings back.
Mi amigo en español por favor ases muy buen trabajo
Luis Cruz claro que si el próximo sera en español.
Yo también pongo vidrios tengo 16 años pero me gusta aprender más grasias mi a migo
How do you initialize the rain sensor?
Johan Lof I would do a few troubleshooting first before reinitialize but if you really need to re-initialize you will need a scanner.
How do you sharpen your BTB
Roberto Escobedo ruclips.net/video/Skdxj4Njd1o/видео.html
Amazing! Did you use the same rain sensor?no need to find a new one?
Jorge Isaac Valentin Flores on this one I didn’t reuse it but once in awhile you could save the old one.
@@AlfredosAutoGlassRepairCorona what gel pad would you buy if you were to reuse the rain sensor?
Hi im the installer too..but i dont have any tools like you use to remove the winshield..you know i use blade cutter to removed the winshield..thats so hard to removed..i wish i can buy like your tools..
Its sunny outside and the BMWadhesive is really soft, why not use a regular cold knife? That feinsetup looks scary, all that vibrating is going to get back at your hands and underarms if you do it enough.
Why not put the urethane on the car instead of the windshield
evan castillo on vehicles that the urethane is applied to the very edge to the glass all the way around its better to apply to the glass also the pinch weld have to be straight as well. But I do prefer to apply urethane to the body on vehicles that I could possibly miss where the urethane goes. Specially in Japanese cars where the urethane goes uneven on the bottom.
Where did you get the dash guard
william arnold check out my video with the WRD Spyder 3 I explain all about the dash cover.
What tool did you use to cut the glue/bottom of the glass? It looks like a Sawzall. And what adaptor did you use to attach it? What was the plastic board you put on top on the dashboard? What is that tool you use to cut the extra glue off? after the glass was removed? Also I notice there was a second tape that was attached to the new glass, I seen the first tape, which is to align the glass to the body, what was the second tape for? Can you send me the link on the cordless tools and blades you use please. This help me replace windshield on bmw. Thank you
JAE MARPLE I used the Ambush. You could buy it from Equalizer www.equalizerfusion.com/Products/ProductDetail/3194
JAE MARPLE I would recommend you to used a wire of fiber line cut out tool for removal of the glass I use the BTB scraper to remove the left over urethane.
@@AlfredosAutoGlassRepairCorona
Thank you
@@AlfredosAutoGlassRepairCorona
At my working place, which is bmw dealership, we use a wire fiber line cut out tool to cut the glue off the windshield. after seeing you used the milwaukee oscillating with the blade attachment to it, this would make me faster on removing the windshield. What blades are you using, that is attach on the milwaukee oscillating?
JAE MARPLE part numbers for blades are 51848 and 51849 from Equalizer if you are using fiber line or wire keep doing that is much better for you and for the car. Faster is not always the best
How do you get started becoming your own boss? Getting jobs etc
Hey what`s the cure time?
kruff39 minimum drive away time is 1 hr and full cure 24hrs.
where i can buy that single suction?
Mohd Hanafi they’re sold as a pair, you could buy them here www.aegistools.com/glass-handling-setting-tools/glasshandler-kit-3-pieces.html
@@AlfredosAutoGlassRepairCorona okay. TQ
Is it better to but the glue on the glass first or on the car ? Most of the people they but the glue on the car then they install the glass !!!!
Adham Aladhami definitely better to apply glue on glass when the pinch weld on vehicles is flat and smooth. As long as you apply the glue right where it goes otherwise you could really mess up. I decide my self base on the what kind of car it is. Thank you for watching my videos
Working on a car with a watch is biggest no no...
How can I make an appointment?
Did you start installing with a company? If so what company
Jonathan Murphy I started working for a company name autoglass.com. I worked there for a little bit over 2 years before I started my own business.
Alfredo's Auto Glass Repair Corona I have been working with safelite auto glass for 4 years and some of the things you would say reminded me of safelite and belron. I had a feeling you worked with an affiliate of belron. I'm glad you were able to start your own business
Where are you located?
Alex Paredes Corona California
Wow. You might as well of removed it with a brick. Here in the uk we do things a little different. Less noise for a start!
I have change yesterday the winsield of my f 31 end now suprise i can hear the wind down to the wipers .what can y do now call you right🤣🤣🤣🤣🤣🤣
wearing a watch with metallic band, during an auto glass job, just looks not so professional to me....
🤣🤣🤣🤣