I also grabbed one because I'm quite interested by the design, but haven't had a chance to shoot at range yet. A bit unfortunate about the hopup issues you see but hope they can be resolved. Would there be an issue with just removing the grub screws and using the TDC alone? I think ultimately in the overseas market this will get compared to the SRS which is cheaper (not sure about the overseas price for the Tomahawk but I'd expect it to be ~600 USD), and also more established. Also hoping they have available some shorter barrels soon to take advantage of the bullpup style; would really like to be able to swap in a weaker spring and short barrel and run in CQB.
@@shinweichiou Ah damn, I've only done a field strip and yet to look in detail at the hope so wasn't sure. I'll have to take a look at what can be done.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
補充說明：
這次影片實屬翻車了～
雖然有些無奈，但畢竟是新產品，待問題改善後再做一次戶外實測。
請問彈簧是特規的要怎麼改 還有共振的問題
@@品元-e3z 彈簧特規問題，我已請託友人幫忙做墊片。
至於共振，就只能等廠商開發配重活塞抵銷。
廠商說彈簧是srs的
抱歉不過要找您做的 加點東西 因為長度有差別 廠商說後續會出專屬的彈簧
@@品元-e3z 大概一個月後左右會出M160的
我覺得有必要把HOP組抽出來看葫蘆賣什麼藥，這樣才知道HOP皮是什麼樣的設計，如果ics想撼動srs的地位，勢必要把問題給改善，不然空有氣量是沒辦法在空狙這塊生存的
就神匠 R-HOP 配置(內外皮配置)，不過我已經在想改成別家 640mm 管子，畢竟 61cc 不是買來心酸的。
@@shinweichiou 神匠那組皮挺不妙的，抄不好的r-hop
@@shinweichiou 期待分享，上禮拜有看到TNT已經在著手改裝升級配件了
這隻真的是未完成品，還有很大的改進空間...但外型真的帥，期待之後各大神改裝分享
感謝超詳細開箱！！！看到很多眉角唷～～～
有時候覺得廠商真的想太多了，pdi廠的vsr10雙臂hop系統最終被aa的單臂取代，如果真的需要調整，不如將下壓塊做的更穩定些讓彈道一致性，彈著偏一側可調整照門或瞄具去改善彈著位置，少一個調整就少一個誤差，畢竟螺絲也會因射擊震動而些微移動影響下壓，而且左右壓點的位置跟角度也要完全對稱，這對加工增加難度。vsr10系統之所以強大不是在於精度，靠的是穩定跟繁多的後市強化套件，簡單易操作也是讓產品能成功的條件之一。
Hi there..nice review.
Did you experience feeding issues from your magazine?
Thanks👍
期待期待！
還好有先看這個評測，專業又實在。省了16000元...
可以再等等，看後續廠商改善方案。
畢竟本身體質還算優良，就一些小細節尚待優化。
掏耳棒看hop真的天才，受用!
我的也到貨哩，不過左右兩邊的下壓塊再調HOP的時候可能要注意下，我的一邊已經斷裂哩，有點太脆XDD
聯絡一下店家或是原廠ＩＣＳ，看看能否有零件替換。
等待中 一堆問題想請教
彈匣拆開裡面的推進器裝反欸 好扯
影片後面有探討到問題，期望能對您有幫助。
或是您能提出影片中，沒提及的問題或建議。
這是我戰斧的參數
（參考就好）
彈簧：
外徑12.7mm
內徑9.5mm
長度246mm
活塞：
內徑13.55mm
外徑25.8mm
補充，尾頂桿9mm
ics想突破的新想法....但是都做 一半～0～ 1.6w有值這個價嗎？0.0a...就慢慢來看邱大了XD
還好啦～ 畢竟開發也是要成本的！
期待開箱，我也買了一把！！
你還沒拿到貨嗎？
@@shinweichiou剛剛 拿到了XD不過還是期待大大的分享啊
@@MrIamgodnotevil 稍微注意一下影片 @15:22 後段 HOP 調整建議，避免射擊性能大減。
@@shinweichiou 好哦，感謝大大筆記中！！！
@@shinweichiou 感謝分享我好像也是遇到一樣的問題等會拆解出來看一下
幫大乾爹打個廣告，這次是使用 ACETECH - LIGHTER BT Bluetooth Tracer Unit 測速紀錄
ruclips.net/video/hygsQSkQcCo/видео.html
有興趣可以前往購買
www.ruten.com.tw/item/show?22224458999488
請問:射擊中如何同步測速,沒有看到測速器在槍管?
是使用乾爹贊助的 ACETECH - LIGHTER BT Bluetooth Tracer Unit 快速方便 多功能
ruclips.net/video/hygsQSkQcCo/видео.html
收到. 感恩!
I also grabbed one because I'm quite interested by the design, but haven't had a chance to shoot at range yet. A bit unfortunate about the hopup issues you see but hope they can be resolved. Would there be an issue with just removing the grub screws and using the TDC alone?
I think ultimately in the overseas market this will get compared to the SRS which is cheaper (not sure about the overseas price for the Tomahawk but I'd expect it to be ~600 USD), and also more established.
Also hoping they have available some shorter barrels soon to take advantage of the bullpup style; would really like to be able to swap in a weaker spring and short barrel and run in CQB.
You can't just remove the grub screws because the Hop tensioner requires grub screws.
@@shinweichiou Ah damn, I've only done a field strip and yet to look in detail at the hope so wasn't sure. I'll have to take a look at what can be done.
掏耳棒太有新意了吧
便宜好用！
Price ? range ?
About $500, 0.48g BB / Range 70m
@@shinweichiou and no Hop issues ' and is it worth it's money '
@@MCLERC88 Haha~ Wait for the third-party upgrade.
@@shinweichiou i have already a G-spec with action army and stalker upgrades
这个圆球拉机柄头实在太low了
同感，我也是收到才知道居然是圓的....忽然想打快打去旋風了...根本搖桿...
感覺就很廉價...
賣價比srs貴,表現超級差,看來srs還會繼續稱霸一段時間
畢竟體質還算優良，就一些小細節尚待優化。
能加你line或者whatsapp吗？最近拆了vfc mcx aeg但是装回去似乎出现了点问题，想请教下您
可以參考一下國外拆裝影片 ruclips.net/video/WCsSY38390Q/видео.html