I have one question: I follow the steps just like your video... Everything works (indicators, text box displaying a value, a text box to set a value) but I don't get a button to work. Everything is on the same screen. The connection is set and I'm using the plc tags. Tried press (set bit) and release (reset bit) events, click event with invert bit. But nothing works. It only beeps when pressed but nothing happens on plc.
Hi, It seems your problem is related to buttons on the HMI screen. First, Please check your connection. start a simple project from the first with new tags (Maybe you defined a tag for different purposes inside the HMI). a simple project can be to use one button on the HMI to turn on a PLC output. Note that, you can not change digital input addresses. You can use buttons on the HMI, only to change memory addresses like M10.2 .
Thanks a lot for these tutorials. I am greatly learning from them them each day. Please sir< could you help me with more insights about the differences between a Stop and an Emergency buttons? Thanks a lot sir
Hello. thanks for watching our videos. note that, you can use a normally close or normally open pushbutton to stop a process, but because of some safety reasons, usually normally close pushbuttons are used. so, both emergency and stop pushbuttons are normally closed. but if you press an emergency button, it will keep its state, until to ensure the emergency state has been removed, and after that, the operator returns the emergency button to its initial state manually. as you know, if you press and then release a stop pushbutton, it will back to its normal state immediately
Awesome explanation good for beginner's
Glad you liked it
Thank You form Bangladesh.
You are most welcome!
You helped me understand this! Really useful video! Thanks a lot!
Glad you like it and thanks for having you on the channel. To support us, please share, like, and subscribe to the channel.
I have one question: I follow the steps just like your video... Everything works (indicators, text box displaying a value, a text box to set a value) but I don't get a button to work. Everything is on the same screen.
The connection is set and I'm using the plc tags. Tried press (set bit) and release (reset bit) events, click event with invert bit. But nothing works. It only beeps when pressed but nothing happens on plc.
Hi, It seems your problem is related to buttons on the HMI screen.
First, Please check your connection. start a simple project from the first with new tags (Maybe you defined a tag for different purposes inside the HMI). a simple project can be to use one button on the HMI to turn on a PLC output. Note that, you can not change digital input addresses. You can use buttons on the HMI, only to change memory addresses like M10.2 .
@@plcgoodsmentor9223 I'll try it and let you know. Thanks!
@@plcgoodsmentor9223 thanks for checking out the channel
Great tutorial , keep doing more
Thanks, will do!
Thanks for the comment! glad you like the content!
Great sir..Very helpful
Thanks and welcome👍👍
Thank you so much Sir
So nice of you❤
Thanks a lot for these tutorials. I am greatly learning from them them each day. Please sir< could you help me with more insights about the differences between a Stop and an Emergency buttons?
Thanks a lot sir
Hello. thanks for watching our videos.
note that, you can use a normally close or normally open pushbutton to stop a process, but because of some safety reasons, usually normally close pushbuttons are used. so, both emergency and stop pushbuttons are normally closed. but if you press an emergency button, it will keep its state, until to ensure the emergency state has been removed, and after that, the operator returns the emergency button to its initial state manually. as you know, if you press and then release a stop pushbutton, it will back to its normal state immediately
thanks for checking out the channel
@@plcgoodsmentor9223 Thanks a lot for your many contributions to my career. The explanation is very much clear too. I really appreciate you sir
Tnanks a lot. Your tutorials are very helpful.
Can you make some videos about API server with PLC. Pls pls
Yes I will!
very helpful
Glad to hear that👍👍
Very usefull
Glad to hear that👍👍
Thanks!
Welcome!
Great! Thanks
You're welcome!
Thank you!
Welcome!
Glad you like the content and your nice comment!
Thanks👌👌👌💪💪
Welcome 👍
Good!!!
Thank you! Cheers! Thanks for checking out the channel!
it is getting some time to see output when click the HMI button and need to click several times to see a out put . Why ?
Hi there, If your program has no problem, maybe your computer speed is low. Please close all unrelated software.
@@plcgoods Ok , i will check 👍
Nice bro...and which voice narrator you are using
Text to speech software Balabolka for Windows, it is a free software
Thanks a lot bro..👍🏻
God bless you🤲
@@theengineersinstinct Thanks for your comment and concern!
Sir can you share the software link
A good tutorial for beginners. However, will be better if you use your own voice.
Thanks for the tip!
Thanks!
You welcome Welcome! Thanks for checking the channel out!