Hey man love the video you and your girl look like you have loads of fun I wish I could take my banshee and ride with you guys but I live in New York just love the your banshee it's just like mine I just made mine red and black this week will post a new video of it this week keep it up man ride hard lol
thanks for watching. the 4 inch leds work great. no problems so far. i even put a pair on my trailer for loading at night. the banshee just got rigged with a 12 inch bar in front to replace the pair of 4 inch bars
+Banshee Fever 750cc I was a little worried about that at first but it has plenty of ventilation both above and below the bar. My Banshee has never had a problem overheating and I run a temp gauge on what's left of my right front fender so I will be able to keep an eye on it this summer.
Yeah I just run a single carb with a clamp on UNI Filter and an outer wear pre filter. The pre filter keeps a little water off but I am always nervous at water crossings. Need to get a single carb stock box adapter.
No but they have held up GREAT though. They are ITP GNCC Holeshot tires. Second season and they are still in awesome shape considering the miles I put on them. Need to get a new pair of rears though, banshee tends to eat them up pretty fast.
MrCHEVYBOI706 You are welcome. My banshee came painted that way when I got her. It is a metal speck green. I was a little hesitant at first to take them out into the woods but they have done surprisingly well. The only chips I have are from where I flipped it over in the rocks when the throttle stuck wide open on me using the old carb setup. I think they were professionally painted but I did spray the Raptor plastics myself using Dupli-color adhesion promoter and metal speck paint. Has held up great so far, the key really is in prepping the plastic and then using the adhesion promoter like I mentioned earlier.
TrailBlogger oh, ok,, northern california?? i am from maine, live in west central florida, just above tampa,,, my wife and i have a 2015 can am outlander max xt 1000 2 up in camo,,, we love it, check out our video,, woofman's ocala ride,, and if you or anyone you know has pets,, check out careyspethq.com , for lots of great pet products,, ride safe,, i like your video,, woofman
Nice video they are always good! I just recently went to the dunes on Sunday-tuesday in glamis CA it was my first dunes trip
Never been to Glamis but that would be a great trip to make someday
Fun ride
Hey man love the video you and your girl look like you have loads of fun I wish I could take my banshee and ride with you guys but I live in New York just love the your banshee it's just like mine I just made mine red and black this week will post a new video of it this week keep it up man ride hard lol
Thanks for the comment Tommy. I will checkout your red banshee video later
Thanks man il have it up in a day or so thanks
Your vids are a Joy to watch. How are those l.e.d. lights holding up? I ordered a pair and was wondering if you like them.
thanks for watching. the 4 inch leds work great. no problems so far. i even put a pair on my trailer for loading at night. the banshee just got rigged with a 12 inch bar in front to replace the pair of 4 inch bars
I was thinking about doing the same thing with the light bar, but was worried about it Overheating.
+Banshee Fever 750cc I think it should be okay but my banshee is stock. the light bar is only a couple of inches tall.
Does the light bar affect air flow to the radiator enough to caise engine temperature to rise?
+Banshee Fever 750cc I was a little worried about that at first but it has plenty of ventilation both above and below the bar. My Banshee has never had a problem overheating and I run a temp gauge on what's left of my right front fender so I will be able to keep an eye on it this summer.
Do you have a air box on your banshee, the air box is messed up on my quad and I just want to run open filter, I ride in the same conditions as you.
Yeah I just run a single carb with a clamp on UNI Filter and an outer wear pre filter. The pre filter keeps a little water off but I am always nervous at water crossings. Need to get a single carb stock box adapter.
Im From L.A Where Is This At Man
northern california is where this was recorded. north of sacramento 2-3 hours.
What levers on the banshee? Nice vid!
I run the Trackside Snapback Clutch Lever from Cycle Gear on the Banshee and the Raptor 700 www.cyclegear.com/TRACKSIDE-Snapback-Clutch-Lever-Assembly
TrailBlogger wow thanks! Love the vids man
Glad you are enjoying the vids! Appreciate the comments
I see that the raptors is less maneuverable then the YFZ450.
The Raptor 700 is a heavy quad but actually surprisingly well behaved on the trail. That is a pretty rocky spot she was crossing there.
I deck ttr broke mi back
New front tires on the banshee ?
No but they have held up GREAT though. They are ITP GNCC Holeshot tires. Second season and they are still in awesome shape considering the miles I put on them. Need to get a new pair of rears though, banshee tends to eat them up pretty fast.
Where is this
California
What time of year is this? I am having MAJOR Raptor 700SE II withdrawal here in Colorado due to the balmy -2F and a Sh&^load of snow :-(
This was last weekend.
This was just a week ago. Been cool here too but no 2 degrees F! BURR MAN! Its about 50 degrees F here today and that feels freezing to me :-D
Nice!
I havea a question, how do u keep ur plastics from getting scratched .. its that candy paint
You have to prep your plastics before you paint them. Scuff them up really good and spray on a layer of adhesion promoter before you paint.
Oh ok thx for the reply and keep the vids coming
MrCHEVYBOI706 You are welcome. My banshee came painted that way when I got her. It is a metal speck green. I was a little hesitant at first to take them out into the woods but they have done surprisingly well. The only chips I have are from where I flipped it over in the rocks when the throttle stuck wide open on me using the old carb setup. I think they were professionally painted but I did spray the Raptor plastics myself using Dupli-color adhesion promoter and metal speck paint. Has held up great so far, the key really is in prepping the plastic and then using the adhesion promoter like I mentioned earlier.
Ok going to try it out.. I ride trails a lot more and was wanting to change up on the plain Jane white color..
Got any videos of you or anyone crashing or wiping out?
This is me crashing on my YFZ450 ruclips.net/video/yC33y2JstUo/видео.html
A few repeated clips in there, still a great video tho!
Thanks! I did repeat a few but in slo mo though :-D
where is this,,, i am in florida
woofman this is in california on the west coast.
TrailBlogger oh, ok,, northern california?? i am from maine, live in west central florida, just above tampa,,, my wife and i have a 2015 can am outlander max xt 1000 2 up in camo,,, we love it, check out our video,, woofman's ocala ride,, and if you or anyone you know has pets,, check out careyspethq.com , for lots of great pet products,, ride safe,, i like your video,, woofman
Tanks for vídeo, instagram?