5th gen Ram 3500 Rear Factory air assist ... Ride Quality fix cheap 👌
HTML-код
- Опубликовано: 23 июл 2022
- www.thurenfabrication.com/pro...
tire pressure.
sensor voltage adjustment with "bed lowering" activated..
install longer links.
cut links approx .5 inch to achieve about 1 inch ride height change from "normal" to "bed lowering" heights 
Авто/Мото
Great video. Really helpful. Now I know how to fix mine. Thank you.
Great video man!! As always you have a great way of explaining the what, who, when and how...
Great video. Instead of the air links I wonder if you could adjust the ride height with Alfa OBD. On my grand Cherokee with air suspension I adjusted mine to have new normal ride heights as well as added spacers. This would keep it with factory suspension pressures but at a higher height it all of it's suspension settings.
Good job. I wanna level my dually with carli springs in the front and to make the rear even i might try thise rods for the bags. I did the whole carli lift on my last truck. In canada its like 10 to 12 k in just parts. I just wanna do the base kit this time but want 3 inch lift in the front. Good video good info about the voltage.
I am always excited to see a new Cuervo video out, sadly it’s not about a raptor this time.
Soon again
On the product site it says it's for the 2500 you get 3500 I imagine it's the same thing. I bought a 2 inch ROUGH COUNTRY left and I would like to adjust the back. thank you good video
Having an issue with the truck I bought used with a lift already installed. They didn't put any links on it at all but I went from riding on the bump stops to being at max psi. The links are 2 inch lift links and my truck is lifted 4 inches so I shouldn't be that maxed out. My level sensor is almost exactly where yours is and my bed lowering still doesn't work.
Where did you find air bag spacer every spacer I find says it's not for my 19 ram 3500 swr
I just tried the voltage trick on a 22 Dually. I got the side to side to match at 2.25V, but in lowering mode or regular mode, the Driver is 3/4" lower than the passenger. Also the lowering vs standard height is also 3/4" of an inch. Maybe this is on purpose from the factory to have the driver lower than passenger??
So it rides better with air in the bags and not deflated? I have a 22 3500 SRW and it is very rough in the rear. Some videos say to deflate the bags for best ride quality. I just need to smooth the ride a bit in the rear.
For mine yes,. Keepsnit off the bump stops. Lower pressure in tires if unloaded
What’s the name of that part I need that