The One to Beat: Bambu Lab X1-Carbon 3D Printer Review
HTML-код
- Опубликовано: 25 июн 2024
- Today, I'm reviewing the Bambu Lab X1-Carbon Combo 3D printer.
*This site contains affiliate links for which I may be compensated
Bambu Lab X1-Carbon*: bit.ly/3XzuET9
Bambu Lab X1-Carbon Combo*: bit.ly/3JzYQaX
Bambu Lab Filaments*: bit.ly/3pusOqd
Bambu Lab Build Plates*: bit.ly/46scg2K
Models printed in this video:
*This site contains affiliate links for which I may be compensated
3D Benchy: www.3dbenchy.com/
Clockspring3D Torture Toaster: www.printables.com/model/6098...
Maker's Muse Puzzle Cube: makersmuse.gumroad.com/l/YLFCX
In3DSpace Prusa LED Light Bar: www.printables.com/model/3267...
Klipper Ringing Tower: www.klipper3d.org/Resonance_C...
Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
00:00 Introduction
01:11 Facts Features and Stats
03:49 The Need for Speed
06:24 Print quality
11:39 Software: Bambu Studio and Bambu Handy
14:50 But not open source
17:27 Parts availability and pricing
18:35 Bed adhesion difficulties
20:05 The heat beds aren't quite flat
21:52 Poop chute and noise levels
23:06 Should you buy one?
![NOSFERATU - Official Teaser Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/b59rxDB_JRg/mqdefault.jpg)
That's how a review should be done. Gold star, James!
That's how a review-review should be done. Meta-gold star, somebody else!
couldnt agree more! very straight to the point and detailed
agreed
Absolutely appreciate the professional approach
Completely agree.
This review was so relaxing to watch. No distracting music just a wise man talking, i am so tired of youtube....
"I haven't been able to test the spaghetti detection," is a flex that hits hard in the 3D Printing community!
What a review. They sent me one. I tried it. I went out and bought one. Is there any better endorsement than that? Of course, you, as always, did a great job of pointing out the strengths and weaknesses of this machine. I admire your consistent integrity and unending level of thoroughness in covering the details. That is one of the magnificent reasons that I treasure watching your channel.
Why would you even need to buy another one, given this one prints super fast, you wouldn't even keep up with designing. Hmmm...
I’m looking forward to getting one myself! How did you get one to review?
Probably the best review of anything, that I've ever seen. Clear, concise and no bs. Thank you very much!
Totally nailed it James! I love your unprecedented quality to details, what doesn't sticking to specs but real life usage. My consideration to buy this printer just increased a lot. I will definitely buy this printer!
Thanks for your review ... I got lucky and purchased my Bambu Lab X1 Carbon with the AMS when it was a Kickstarter campaign at a discounted intro price. I received mine mid-summer last year and although I don't print nearly as much as you do, I have experienced ZERO problems. My printing experience has been for the most part flawless. I am old, as in late 70's, and I find the Bambu Lab support to be wonderful. I asked a few questions when I received the printer just to make sure I was totally prepared to use and not destroy the unit before I could experience my first print. If Bambu labs has any problem in the USA, it's having filament in stock. It seems every time I go to purchase filament it's out of stock. Maybe it's just poor timing, but that is my experience. I also would echo your review and add I love the product, service and I agree that the filament ( when in stock ) is worth the little extra cost to make printing a "Slam Dunk", in MY EXPERIENCE... Thanks for sharing ... Stay Safe and Well...
Still out of stock 😂
I own the X1C for four weeks now and my experiences with the printer are exactly the same. I was a huge fan of Prusa, but now my MK3s+ is out of work. I've ordered a P1P as second Printer which arrived yesterday. My first experiences with this machine are also amazing!
Thank you James. Purchased one this morning using your link. I absolutely love your videos. Please keep up the good work.
Logged in just to say 100% great review. Clear and concise. Pleasure to watch and listen to. Ty
James, I wish news outlets delivered information with the level of candor and transparency you showed in this vid. Thanks for sharing.
Very Helpful review. I just bought an X1-Carbon Combo myself and this was really helpful giving me a good idea of what to look for.
When I saw the early reviewers prior to production release it looked compelling and so I ordered one. I have had no other prior experience with an FDM printer. I use it in support of my design work and it's fantastic to go from SolidWorks model, to 3MF file to sending the sliced file to the printer and pull out a finished part in 30 minutes. It is an excellent tool for this work.
I've had my eye on this printer for a little while, but seeing this has pretty much just sealed the deal. Definitely wouldn't be the first time I've bought something because I saw you use it (and like it) and you haven't let me down yet!
Love how detailed you get when reviewing something 👌
Just bought the Bambu Lab X1-Carbon Combo 3D Printer due to your thorough review. Used your link. Thanks for the review.
This was the exact review video I was looking for. I’ve been researching for hours on what should my next printer be and this printer sounds like a solid choice. Great video 👍👍
Thanks for a great review!
I have had my X1C for 4 months and compared to my last 6 cheap, unreliable printers, its game changer. No more tinkering just printing and yes its fast but the quality of the prints is still amazing. I can't wait to see more Bambu innovation we will no doubt see some even better machines in the future.
I have been printing on a prusa for many years. Thank you James for your honest and sincere opinion on this printer and the other things you do. You are a class act. Thank you
Great video. Appreciate the disclosure at the beginning and the efficient nature of info delivery throughout the video! 🙏
I really like how you took the time to fully explain that they had sent you a unit, their expectations, your own purchase, and affiliate status. While yes, you do have an incentive for people to buy these, fully disclosing the details makes it feel much less like a "money grab" review. I'm not sure if you purchased the second one because you had to return the one they sent or if you just really liked the unit and wanted to remove any possible "obligation" that could be viewed as influencing an honest review before making the video.
In short, I appreciate the upfront and honest transparency, and you created a good review!
I have this printer with the AMS unit, with over 1,000 of print time. I love it. I don’t believe a single print job has ever messed up. 😊
Does it require a lot of manual maintenance? Tuning rails and such?
What a pleasant surprise - informative content in a review. Thank you.
Great job on the overview of the BBL game changing printer. I played around with a Creality Ender Pro before it and the ease of use, quality of prints and the speed is to a whole new level. The only drawback I have seen with my Bambu printer is that when you need to fix a clogged extruder or get rid of a piece of filament stuck in the AMS, it really requires some serious surgery. I am pretty adapt at this stuff, and it even intimidates me. Some of the procedures are just out of reach for most people. I have a ton of spare parts and have not used any of them. Thankfully, it works most of the time!!
Great review. Lines up with my experiences with my x1c
The best, most honest and accurate review of the Bambu Lab X1 Carbon I have seen. On the cool plate, I use it all the time and never had a problem with adhesion, never. Clean it, add glue stick, done. Never a problem.
I have 2 X1Cs and I agree totally. Great unit. Great job reviewing it!
Your advice is always sound. You taught me how to make my plasma table work! Just ordered X1-Carbon with your affiliate link.
Thank you so much i got my X1-Carbon AMS combo last week this is a hige help and kind of opened my eyes a bit on what to look out for and also kind of what to expect from my Bambu Lab X1-C. Awesome review brother!!!
This is one of the most useful 3D printer reviews I've ever seen.
Thank you for this video. You presented very useful information in a comfortable way and just what I needed to feed my decision process.
Great review! I print mostly ABS and had issues with adhesion on the textured PEI plate since the very start. Decided to do exactly what is advised against. I rubbed it down quickly with acetone and it has been perfect ever since!
This machine is amazing and I love it. I have had it for 4 weeks and it has printed non-stop. My students design and model objects, so prototyping is a part of this process. I have 4 other 3D printers in my classroom, all different manufacturers, but this machine blows them away, because of the crazy speed. Most teachers aren't interested or equipped to tinker with machines, so this would be the perfect machine to encourage them to enhance lessons. It is basically plug and play. I can't say enough about the ease and value of this machine. It's actually a useful and reliable tool, rather than a new issue. I LOVE THIS MACHINE!
A direct and thorough review that is objective and well made. Thank you!
Brilliant review James. I bought a Qidi i-fast 7 months ago, and already I'm very tempted by the Bambu X1-Carbon. The fact that you got one for free, then went out and bought another says everything. Although I'm quite capable of tinkering (engineering background), what I actually want is a 3D printer that just gets on with the job, with minimal input from me. I don't need to tinker with my colour laser printer, my oscilloscope, my dishwasher etc. These are all 'tools' that do a specific job for me. I now realise that I want the same from a 3D printer, so that I can get on with the job of designing things, with fairly quick prototyping.
Thank you James for the great review and info.
Really nice dialogue with discussion of how things work. I am leaning toward getting one once I get through my dro and cnc issues.
Great review James, thank you. I’d buy one if I had a production need.
You've convinced me to add this printer to my buy list. Excellent review!
I ordered mine yesterday after doing 3 weeks of research and debating between this and the prusa mk4. The speed and quality on this thing got me and the prusa is out of stock until september. I can’t wait for this thing to arrive this week. Great video!
You made the right choice.
Hey, thanks for being so upfront on the compensation and affiliates and such. Solid stuff.
WOW! What a fantastic, thorough review. Thank you for helping me in my decision making process. Between yours and a couple of other reviews, I’m now not so apprehensive about considering this printer.
Brilliant review, thanks James.
Appreciate the no nonsense, factual, experience based review! Nice job!
Great review! I learned a lot, thank you for sharing.
This machine is the answer I’ve been waiting for, I love this tool, yes a quality tool that works
Thank you, the solid review I was looking for!
With every video I wonder how you only have 100~k subs. Superb quality videos, some of the best out there in this area 👏🏻👏🏻
Just bought one online and this is the first video I’ve seen on it. Great job.
Man you sure did an amazing job reviewing the X1C. I am for sure going to pick one up now 😊
Prusa MKS3 owner here, and I really liked your review. I think it was pretty fair and unbiased. I'm not in the market for another printer, but if I was I think I would at least consider the X1. In the "But not open source" section, you mentioned that many people's default expectation is that a 3D printer is to be OpenSource. I don't think of it in terms like like. For me, the issues I have with Bamboo is 1) this hobby/industry/community (or whatever you want to call it) is based on Open Source, and the advancements made over the last 10+ years couldn't have been made if it weren't for Open Source firmware and Open Source slicers. My guess is that their firmware relies on innovations made by others, and leveraging innovations made in software that is Open Source, yet closing your own source seems a bit hypocritical and a bit like "cheating" to me. 2) Our hobby/industry/community has grown due to innovations and discoveries made over the years, and with the innovations being openly discussed, shared, and improved on. By closing their source and not "paying it forward", it hurts the industry.
PS. you said, "Prusa has set a real precedent in the 3D printing industry by Open Sourcing their printers". Prusa isn't alone in this (there's Lulzbot/Taz, and many others), and they weren't the first, so I wouldn't say they they set the president. I mean, RepRap... _they_ set the precedent.
I'm fine if they steal. I'm not fine if they keep filing patents based on the stolen ip that will be used to kill the competition, just like dji.
You're 100% Correct
Been Printing for 8yrs+, mainly designing custom system for personal use, not having a Open Source Software Options is a absolute Deal Breaker.
well said!
I’m 100% with you on your very polite reaction. Very well said!
The very first precedent was set by Ultimaker btw.
Don’t get me wrong about my thoughts on the X1, this is indeed the bar that’s set in modern days 3d printing. I’m really stoked about the build in LiDAR and tagged spools that will help set up the parameters of one’s print.
There are only 2 points (better just 1.5 actually) of attention to dare criticize the X1 on;
-1; It is a bit of a thing that topic you’ve pointed out on the closed source feature. It’s not the most respectful way of entering the market.
I do understand that they have a business model to carry out. Too bad that they’ve chosen to drop open source. This will be a dealbreaker for lots of enthusiastic new (or extra) machine buyers.
A bit like the AnkerMake story now isn’t it?
-1.5; The other point i’d say is the noise level of the machine. It looks like the guys in the Lab made of Bambuuu are very well articulated in the fact that working at 4 times the printing speeds it’s not exactly a focal point to reduce noise levels as this will be highly contradicting on itself. Next to good cooling at very high speeds i can see why this isn’t all that bad and urgent.
By innovation you mean company's cloning others by having "open source" allows for taking other work to just sell it your own. To me: open source is just a gateway to get other company's produce the same tech. The real innovation comes from the community's feedback. The companies make those innovation come to life. I think in my opinion that Bambu Lab made a smart move by close source their systems. Allows for other company's to do their job for once and innovate instead of cloning it. Still Creality managed to clone their Corexy printer from Bambu Lab and market it a 100mm faster than theirs. Qidi tech attempted at doing the same but failed in some features. So really competition comes to life.
Ive had my X1 for a month now, and is the 5th 3D printer I’ve owned over the last 12 years. It is by far the best printer I own. I print eSun+ PLA with no problems. Ive always used the textured build plate set to 60Degc and zero first layer or adhesion issues. Bambu defiantly has a winner and build quality is fantastic. It’s a set and forget once I press the print button.
Wait till you need to replace parts, then see what you will do when they will be not available or expensive.
@@akierum Curious as to what parts you might be referring to? I have interest in purchasing one of these, and definitely looking for any potential reasons not to.
I'm new to 3D printing world, I've been interested for a decade plus but never took the plunge. I'm BEYOND happy with this purchase. As a 3D Design and Animation major from early 2000's I was the designer slicer and printer except with paper and an exact knife. I've made some really cool stuff over the years but my career took me in a different direction.
I just wanted a printer that was reliable with high quality and zero to little desire to tinker. This review just AGAIN solidifies that I made the right choice.
Cloud based bothers some but I'm not here to make money, just see my ideas and creativity come to life. I've already found so many uses in the last 3 weeks of printing and excited to see what the next 12 months look like for me.
The slicer is beyond intuitive for a newbie and your detail here described is exactly my experience thus far.
Fantastic review and honest opinion.
Reviews don't get better than this. Thanks.
Awesome review! Well done.
Great review! I'm printing some prototypes on my X1C as I'm watching this.
I'm using the X1 for my printing service business and it has repaid itself fully within the first 2 months and less than 700 print hours. Couple small replacement parts, otherwise rock solid. No need to say more I think.
Replacement parts needed within 2 months of use?
Yeah, 2 months repairs seems problematic
@@antoniorios3856 700 print hours
@@antoniorios3856 Look into "bathtub curve" or "infant mortality". People assume that something new should be reliable, but that is when the manufacturing defects tend to show up. After that they become reliable for a long time until parts start wearing out. The "infant mortality" is the whole point of warranties. Also 700 print hours in those tw months is beating on the thing pretty hard.
@@OccultDemonCassette 2 months of doing one print and 2 months of doing ten thousand prints? Time is meaningless, print time is important. 700 hours is a lot of print time.
I've had an X1C and AMS since ~December, and it's been transformative (life-changing?) After years of futzing with the hardware and endless fiddling with settings, I finally have a *tool* I can use to make other things with. It's hard to overstate the difference this has made in what I do and how I use 3D printing. I can actually design something and iterate it 5 or 6 times in a day (I'm a noob Fusion 360 user, so there's lots of iterating ;-) Or if I want a bunch of something (Gridfinity bins, for example), it'll just crank out piles of them.
The one downside? I"m spending a whole lot more on filament these days :-0 (But I'm having good success with even cheap brands like bulk-purchase Eryone PLA at $12-13/kg and only minor tweaking and perhaps slightly slower speeds, so that helps with the cost.)
The AMS is surprisingly useful, not because I do multicolor prints, but because as you said, I can keep 4 different spools bone-dry and ready to go at a moment's notice. For my usage, it's been very well worth the added cost.
I honestly can't say enough good about the printer, and the Reddit community for it is very helpful as well, making it even nicer.
The one decision people might be wrestling with is whether to get the less expensive P1P or the X1C. This is purely anecdotal, and could simply be the result of more P1Ps being sold, but FWIW I've seen a lot more P1P than X1C owners asking for help solving print problems on the Reddit forum. Like I said, it's entirely anecdotal, but I can say that I myself have had next to no issues with my X1C/AMS combo. (The biggest one has been trying to run old, brittle filament through the AMS and having it break inside. Once you've been through the process of clearing the resulting jam once it's pretty straightforward, but still a pain. If you have old filament, do yourself a favor and run it as an external spool.)
Just to add, I bought a P1S about 6 months ago and it has been a work horse. I design a print, slice it and send it over to the printer. The P1S takes over and makes my design (sometimes flawed) and prints it. No hassle with levelling, bed adhesion or anything using a textured plate. I don't print pretty things. I print parts I use in my projects. And this printer does exactly what I needed a printer to do. The ONLY difference between the P1S and the X1 Carbon is the lidar. Nothing more. So yes, your assumptions are really anecdotal. Best money I've ever spent and I'm considering a second one.
New to the 3d World. Son-in-law bought an original Prusa i3 MK3 a couple of years ago (guess who had to assemble it) for my grandson. New house, new school and new friends my grandson lost interest (he will come back) so I inherited it. Started to play around, watch some videos and actually printed out a few things. Sooooo. Next steps. After watching this video it looks like I will purchase the X1 Carbon. This was of the best reviews to date, as others have said "This is how a review should be" Thanks
This is a well done video, good job. I will be adding one of these to the arsenal, and will use your link as a thank you.
Great review. Thanks for the info. This may be my new 3d printer.
Love that you named one "Fear" and the other "Loathing".
I am thinking of getting into 3D printing and I know this one is on the high end for a new person. After watching this video I feel like this may be the way to go for ease of use out of the box a great way to start making things for myself and my family. It also sounds like the customer support is great. I am a big fan of buy it once. Thanks for the great video, earned my sub for sure.
Love your video 👍🏼 you explain this product so well. You get to the point you give your feedback and suggestions i find it very entertaining. Planning to buy one in the near future thank you for this video 👍🏼 you have a new subscriber 👏
Top notch, even handed review. You get who this printer is for! Pretty much matches my Kickstarter unit experience. For PLA printing the Cool Plate is a “Cool” Plate. I have over 800 hrs on mine. I have been using Windex as a release agent from day 1 and it works great. I have had bubbles occur (they are easy to remove), but it’s because I haven’t let the plate completely cool before removing large parts. A recently acquired second “Cool” Plate is the solution to my impatience.
We've been tested this machine in the studio, the real power is that it only took roughly 1/4 of time to achieve the quality of Markforge(of course Markforge does have lots of unbeatable features) with carbon material, plus just like you said it speed up the iteration process. It's truly amazing in the product development field.
I am 90 days into 3D printing. A friend recommended the X1 Carbon. It's the iPhone of 3D printing. It just works. I've had to do maintenance which consists of cleaning the Z-axis rods and wiping down the carbon rods for the printhead support. The PEI textured plate does have some adhesion issues (look at me using the lingo like I know what i'm talking about). I now plan to use the cool plate with glue for small pieces that have low surface to plate area. Loving the X1 Carbon. If your time is worth more than a few hundred extra dollars, get this machine now!
Great video James I am saving for the p1s combo. Thanks 😊.
Fantastic Presentation. Loved the titles of the sections, quite poetic, and diggin your Fear and Loathing Nicknames. That was a super informative video. You got a subscriber, Thanks for all your insight!
Sam
Great video+explanation+presentation! Thank you SO MUCH for sharing your knowledge! Well done mate - NEW SUB 🙏🏻
Awesome info. I have been using my X1 carbon for a couple of months now. I find it a fantastic printer. I did switch to whambam pei plates and adhesion in awesome so good you have to use glue stick. Thank you for your review and keep the signal 📶 going strong 💪 🇺🇸😎
Thank you for mentioning the textured PEI plate! It will be my first 3D printer and I will use your affiliate link when I can.
Nice job reviewing this printer !!
If the next version offers a bigger build volume (300 x 300 x 400mm or greater) and it's quieter - plus fixes to the things you highlighted, I'm interested! I have 22 machines in my mini factory in my shop, mostly bed slingers. Full enclosures, fume extraction and fire suppression devices. Print safe! Great video!
I agree with everything you said. I love my X1C and opted for a 2nd AMS and was considering a 3rd. My 1st printer was a 'tinkerers dream' and I learned a ton, but with the X1C I now spend the spare time I have CAD'ing new projects instead of: print, make adjustments, print, remove failed print, make more adjustments, print again (repeated too many times) on the other printer.
One of the best reviews I've ever seen.
Great review. There are times I like to tinker (or I wouldn't be a maker) and there are times I just want an appliance that works (which is why I didn't build my own refrigerator or TV). This is one of those appliances that might be a little locked down, but it works, like my iPhone.
I'm still contemplating on the printer but I have got to subscribe to you for your honesty and unbiased review. People claim to be unbaised when reviewing things but their bias leaks through in between. But none here, you stated all the pros and cons and completely left it to us to decide!
Great video, thank you for your objective perspective and experience.
I've had my X1 Carbon /w AMS for a few weeks now and really enjoy it. The speed and print quality is outstanding. After coming from a partially homebrew i3 variant I spent many years tinkering with, cursing at, and chasing speed or quality - it really is a breath of fresh air. It's like driving a tuner car for a long time and then deciding to get something quick and nice from the factory.
You asked for suggestions. For many years my go-to brand of filament came on wide spools (75mm), and consequently, I have a number of them. Unfortunately, wide spools won't natively fit in the AMS. I printed a device to 're-spool' them to standard size spools, but it's a serious pain. Additionally, cardboard spools are iffy and not recommended for use in the AMS. There are rings you can print to stiffen up the walls of the spools and cut down on cardboard dust, but your mileage may vary.
If anyone finds themselves in a similar situation, I recommend printing the 'AMS Hydra' mod that can be found on Printables. It replaces the interior chassis of the AMS, so you need to bring all of the mechanical and electrical devices over. It takes about an hour and you can even use the hex wrenches provided by Bambu to do all the work. I'm happy to say after performing this modification, I'm able to print using my existing stock of filament from the AMS without issue.
One other quick tip is to calculate the max volumetric flow for your filaments, then simply use that to control the speed of the print. The printer will do what it can to maintain maximum print speed, however, it will limit its speed based on the maximum extrusion volume your filament is capable of. Using this method allows you to simply choose your filament, slice, and away it goes. If you choose a different color or material that can print faster, or needs to go slower (e.g.; TPU), the slicer will automatically adjust speed.
There's a fork of the Bambu Studio slicer called OrcaSlicer, and I highly recommend it. It includes one-click calibration models and that makes it very handy. It can also be used with other printers if you still use your old one. It's a little unstable in Linux, specifically with regard to video streaming, but I blame that on the libraries.
Thanks mate! Very useful in-depth opinion whereas you bring up a lot of solutions. Class act!
Great review that is both clear and honest. I LOVE mine. It’s my first printer and I am exactly the person who what’s to print stuff and walk away. I am their market. I too want to know early on in the design process what works and what doesn’t. I’d buy a second unit in a heartbeat. I’ve had a few issues, but frankly I’m taking full responsibility for me being a newb. Every person I show the prints to just drool at the quality. I do get a jammed nozzle at the very end of the completed print when using Bambu ABS-CF. Not sure why but using nylon cf is a win every time. 👍🏽👍🏽
Thank you for such a fine review of the X1! I Will be buying a new printer in the near future and I'm 99.99999% sure it's going to be the X1 Carbon. Thanks again for a stellar concise review!
Great review. Very well done.
Awesome review, thanks !
I bought mine in December, was new to 3d printing, but have about 600 hours on it now, the spaghetti detection and first layer detection have worked great. I love being able to leave it printing at work, and check in remotely after I get home.
Your videos showing 3d printing were a big push into deciding to buy it and get rolling.
You should never leave a 3D printer running while you're away from your home unless you have multiple Fail-Safe protections.
@@dangerous8333 considering it sits in my shop, I always run it when I’m away from home. What’s it gonna do besides ruin a print or light on fire?
@@dangerous8333 lol not sure if you are joking or not.
I like your style. You seem almost indifferent, even slightly annoyed but the you shoot "It doesn't bother me, I'm barely human" like the best standup comedian...
Grat presentation...
Nice review. Very complete,
Mine is on the way! Thanks James
Still waiting on it... UPS says something about weather? Perhaps climate change has impacted my shipment.... ha!!!
I had been looking at this James, and your video was the stimulus to buy. So I did, and used your affiliate link. Thanks for great continual content. …long time subscriber….
Excellent review. Like others, I wanted a tool, not a science project, I have plenty of those. Being able to draw something up in Fusion and generate a part quickly has really changed things. Last night I tried the auto filament change for the first time, it was essentially seamless and as each part takes just over 500g of filament, this is a massive benefit in reducing waste or partially used spools. This is my first 3d printer, I resisted for years since I have a shop with similar capabilities to yours, I just made most things from metal, but having the x1c has opened up more possibilities than I imagined. I pre-ordered a Prusa XL, it may actually ship soon and I likely won't cancel it, there are features that I think will be very good and I suspect it will be pretty much in the "just works" category as well. Mostly I print PLA as it's adequate for the majority of jobs, but I drew up some fluted knobs for the small Kant-Twist clamps and printed those in PET-CF, no problem.
I've had good luck with hairspray on the cool plate, though the Wham Bam PEX plate, no adhesive needed for PLA, provided it's hot enough, 55 - 60C has worked well and once cool, the parts just pop off.
@@user-cl3re8xi7y - I just export it as a STEP file and import into the Bambu slicer, There is an option in Fusion for 3d print and you can point it at the Bambu slicer, but I like having them as distinct processes.
Great review. Heading to buy!
Great review, Going to click on your link and purchase 2 of them for my shop. Thank you
Thank you, absolutely excellent review. I have a 6-1/2 year old Wanhoa Monoprice Maker Select Plus that I've modded to death and can't go any further with it. While it's a work horse and does what I tell it to do, I'm ready to take the next step. Larger and faster prints, multicolor, multi-filaments, etc. Again thanks for the excellent review, love your work on your channel.
I purchased the Bambulab x1c and have not looked back. An occasional hiccup, usually cause by me forgetting something during the model design. I was tired of having to tune the printers each time I changed filaments, or from PLA to PETG, etc. The X1C just cranks out the parts for my projects, and so much faster than my prior printers. Not having to bed level all the time saves me a lot of time. I love it.
top shelf content. refreshing
A few years ago I decided I wanted a 3D printer but didn’t have a job to get one. Fast forward to 4 months ago I finally have a good paying job and was ready to get one.
I was gonna go blind and just get a elegoo Neptune, but I was told by someone do I want to get into working on 3D printers or do I want to 3D print. So I did my research. Your video was one of the first I saw and I instantly fell in love with the Bambu printer.
Fast forward again to yesterday and I finally bought one. I can’t wait, I also have bought some filament and the ams hub because I plan on getting more that one. Thanks for the awesome review it really helped me buy my first 3D printer.
Great review. Thanks! I'm in the market for a 3D printer as a home hobbyist. I'll definitely consider the X1C.
Great video! Just decided to go for this printer
He is not lying. I bought my machine last week and been using it. I love it. It is fast and part looks nice. I hope Bambu comes up with a bigger machine
Excellent Review!